Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...

CREDITS

@@ -1221,7 +1221,7 @@ S: Brazil
 
 N: Oded Gabbay
 E: [email protected]
-D: AMD KFD maintainer
+D: HabanaLabs and AMD KFD maintainer
 S: 12 Shraga Raphaeli
 S: Petah-Tikva, 4906418
 S: Israel

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -146,3 +146,36 @@ KernelVersion:	4.16
 Contact:	Stephen Hemminger <[email protected]>
 Description:	Binary file created by uio_hv_generic for ring buffer
 Users:		Userspace drivers
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_in_full
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <[email protected]>
+Description:    Number of guest to host interrupts caused by the inbound ring
+		buffer transitioning from full to not full while a packet is
+		waiting for buffer space to become available
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_out_empty
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <[email protected]>
+Description:    Number of guest to host interrupts caused by the outbound ring
+		buffer transitioning from empty to not empty
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_first
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <[email protected]>
+Description:    Number of write operations that were the first to encounter an
+		outbound ring buffer full condition
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_total
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <[email protected]>
+Description:    Total number of write operations that encountered an outbound
+		ring buffer full condition
+Users:          Debugging tools

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -0,0 +1,126 @@
+What:           /sys/kernel/debug/habanalabs/hl<n>/addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets the device address to be used for read or write through
+                PCI bar. The acceptable value is a string that starts with "0x"
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays a list with information about the currently allocated
+                command buffers
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays a list with information about the currently active
+                command submissions
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays a list with detailed information about each JOB (CB) of
+                each active command submission
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/data32
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Allows the root user to read or write directly through the
+                device's PCI bar. Writing to this file generates a write
+                transaction while reading from the file generates a read
+                transcation. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/device
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Enables the root user to set the device to specific state.
+                Valid values are "disable", "enable", "suspend", "resume".
+                User can read this property to see the valid values
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets I2C device address for I2C transaction that is generated
+                by the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets I2C bus address for I2C transaction that is generated by
+                the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Triggers an I2C transaction that is generated by the device's
+                CPU. Writing to this file generates a write transaction while
+                reading from the file generates a read transcation
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets I2C register id for I2C transaction that is generated by
+                the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led0
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets the state of the first S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led1
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets the state of the second S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led2
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets the state of the third S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the hop values and physical address for a given ASID
+                and virtual address. The user should write the ASID and VA into
+                the file and then read the file to get the result.
+                e.g. to display info about VA 0x1000 for ASID 1 you need to do:
+                echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Sets the PCI power state. Valid values are "1" for D0 and "2"
+                for D3Hot
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays a list with information about the currently user
+                pointers (user virtual addresses) that are pinned and mapped
+                to DMA addresses
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/vm
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays a list with information about all the active virtual
+                address mappings per ASID

Documentation/ABI/testing/sysfs-bus-intel_th-output-devices

@@ -3,11 +3,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <[email protected]>
 Description:	(RW) Writes of 1 or 0 enable or disable trace output to this
-		output device. Reads return current status.
+		output device. Reads return current status. Requires that the
+		correstponding output port driver be loaded.
 
 What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port
 Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <[email protected]>
 Description:	(RO) Port number, corresponding to this output device on the
-		switch (GTH).
+		switch (GTH) or "unassigned" if the corresponding output
+		port driver is not loaded.

Documentation/ABI/testing/sysfs-driver-habanalabs

@@ -0,0 +1,190 @@
+What:           /sys/class/habanalabs/hl<n>/armcp_kernel_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the Linux kernel running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/armcp_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the application running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/cpld_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the Device's CPLD F/W
+
+What:           /sys/class/habanalabs/hl<n>/device_type
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the code name of the device according to its type.
+                The supported values are: "GOYA"
+
+What:           /sys/class/habanalabs/hl<n>/eeprom
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    A binary file attribute that contains the contents of the
+                on-board EEPROM
+
+What:           /sys/class/habanalabs/hl<n>/fuse_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the device's version from the eFuse
+
+What:           /sys/class/habanalabs/hl<n>/hard_reset
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Interface to trigger a hard-reset operation for the device.
+                Hard-reset will reset ALL internal components of the device
+                except for the PCI interface and the internal PLLs
+
+What:           /sys/class/habanalabs/hl<n>/hard_reset_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays how many times the device have undergone a hard-reset
+                operation since the driver was loaded
+
+What:           /sys/class/habanalabs/hl<n>/high_pll
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Allows the user to set the maximum clock frequency for MME, TPC
+                and IC when the power management profile is set to "automatic".
+
+What:           /sys/class/habanalabs/hl<n>/ic_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Allows the user to set the maximum clock frequency of the
+                Interconnect fabric. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device IC clock might be set to lower value then the
+                maximum. The user should read the ic_clk_curr to see the actual
+                frequency value of the IC
+
+What:           /sys/class/habanalabs/hl<n>/ic_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the current clock frequency of the Interconnect fabric
+
+What:           /sys/class/habanalabs/hl<n>/infineon_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the Device's power supply F/W code
+
+What:           /sys/class/habanalabs/hl<n>/max_power
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Allows the user to set the maximum power consumption of the
+                device in milliwatts.
+
+What:           /sys/class/habanalabs/hl<n>/mme_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Allows the user to set the maximum clock frequency of the
+                MME compute engine. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device MME clock might be set to lower value then the
+                maximum. The user should read the mme_clk_curr to see the actual
+                frequency value of the MME
+
+What:           /sys/class/habanalabs/hl<n>/mme_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the current clock frequency of the MME compute engine
+
+What:           /sys/class/habanalabs/hl<n>/pci_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the PCI address of the device. This is needed so the
+                user would be able to open a device based on its PCI address
+
+What:           /sys/class/habanalabs/hl<n>/pm_mng_profile
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Power management profile. Values are "auto", "manual". In "auto"
+                mode, the driver will set the maximum clock frequency to a high
+                value when a user-space process opens the device's file (unless
+                it was already opened by another process). The driver will set
+                the max clock frequency to a low value when there are no user
+                processes that are opened on the device's file. In "manual"
+                mode, the user sets the maximum clock frequency by writing to
+                ic_clk, mme_clk and tpc_clk
+
+
+What:           /sys/class/habanalabs/hl<n>/preboot_btl_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the device's preboot F/W code
+
+What:           /sys/class/habanalabs/hl<n>/soft_reset
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Interface to trigger a soft-reset operation for the device.
+                Soft-reset will reset only the compute and DMA engines of the
+                device
+
+What:           /sys/class/habanalabs/hl<n>/soft_reset_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays how many times the device have undergone a soft-reset
+                operation since the driver was loaded
+
+What:           /sys/class/habanalabs/hl<n>/status
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Status of the card: "Operational", "Malfunction", "In reset".
+
+What:           /sys/class/habanalabs/hl<n>/thermal_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the Device's thermal daemon
+
+What:           /sys/class/habanalabs/hl<n>/tpc_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Allows the user to set the maximum clock frequency of the
+                TPC compute engines. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device TPC clock might be set to lower value then the
+                maximum. The user should read the tpc_clk_curr to see the actual
+                frequency value of the TPC
+
+What:           /sys/class/habanalabs/hl<n>/tpc_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the current clock frequency of the TPC compute engines
+
+What:           /sys/class/habanalabs/hl<n>/uboot_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Version of the u-boot running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/write_open_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        [email protected]
+Description:    Displays the total number of user processes that are currently
+                opened on the device's file