ARM: highbank: fix cache flush ordering for cpu hotplug

The L1 data cache flush needs to be after highbank_set_cpu_jump call which
pollutes the cache with the l2x0_lock. This causes other cores to deadlock
waiting for the l2x0_lock. Moving the flush of the entire data cache after
highbank_set_cpu_jump fixes the problem. Use flush_cache_louis instead of
flush_cache_all are that is sufficient to flush only the L1 data cache.
flush_cache_louis did not exist when highbank_cpu_die was originally
written.

With PL310 errata 769419 enabled, a wmb is inserted into idle which takes
the l2x0_lock. This makes the problem much more easily hit and causes
reset to hang.

Reported-by: Paolo Pisati <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>

arch/arm/mach-highbank/hotplug.c

@@ -28,13 +28,11 @@ extern void secondary_startup(void);
  */
 void __ref highbank_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	highbank_set_cpu_jump(cpu, phys_to_virt(0));
-	highbank_set_core_pwr();
 
-	cpu_do_idle();
+	flush_cache_louis();
+	highbank_set_core_pwr();
 
-	/* We should never return from idle */
-	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+	while (1)
+		cpu_do_idle();
 }