Merge tag 'v4.10-rc8' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <[email protected]>

Documentation/media/uapi/cec/cec-func-close.rst

@@ -33,11 +33,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 Closes the cec device. Resources associated with the file descriptor are
 freed. The device configuration remain unchanged.
 

Documentation/media/uapi/cec/cec-func-ioctl.rst

@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 The :c:func:`ioctl()` function manipulates cec device parameters. The
 argument ``fd`` must be an open file descriptor.
 

Documentation/media/uapi/cec/cec-func-open.rst

@@ -46,11 +46,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To open a cec device applications call :c:func:`open()` with the
 desired device name. The function has no side effects; the device
 configuration remain unchanged.

Documentation/media/uapi/cec/cec-func-poll.rst

@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 With the :c:func:`poll()` function applications can wait for CEC
 events.
 

Documentation/media/uapi/cec/cec-intro.rst

@@ -3,11 +3,6 @@
 Introduction
 ============
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 HDMI connectors provide a single pin for use by the Consumer Electronics
 Control protocol. This protocol allows different devices connected by an
 HDMI cable to communicate. The protocol for CEC version 1.4 is defined
@@ -31,3 +26,15 @@ control just the CEC pin.
 Drivers that support CEC will create a CEC device node (/dev/cecX) to
 give userspace access to the CEC adapter. The
 :ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do.
+
+In order to check the support and test it, it is suggested to download
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It
+provides three tools to handle CEC:
+
+- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit
+  and monitor CEC messages.
+
+- cec-compliance: does a CEC compliance test of a remote CEC device to
+  determine how compliant the CEC implementation is.
+
+- cec-follower: emulates a CEC follower.

Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst

@@ -29,11 +29,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query
 device information, applications call the ioctl with a pointer to a
 struct :c:type:`cec_caps`. The driver fills the structure and

Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst

@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current CEC logical addresses, applications call
 :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
 struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.

Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst

@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current physical address applications call
 :ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
 driver stores the physical address.

Documentation/media/uapi/cec/cec-ioc-dqevent.rst

@@ -30,11 +30,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 CEC devices can send asynchronous events. These can be retrieved by
 calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
 non-blocking mode and no event is pending, then it will return -1 and

Documentation/media/uapi/cec/cec-ioc-g-mode.rst

@@ -31,11 +31,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent
 applications from stepping on each others toes it must be possible to
 obtain exclusive access to the CEC adapter. This ioctl sets the

Documentation/media/uapi/cec/cec-ioc-receive.rst

@@ -34,11 +34,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To receive a CEC message the application has to fill in the
 ``timeout`` field of struct :c:type:`cec_msg` and pass it to
 :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.

MAINTAINERS

@@ -1091,7 +1091,7 @@ F:	arch/arm/boot/dts/aspeed-*
 F:	drivers/*/*aspeed*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <[email protected]>
 M:	Jean-Christophe Plagniol-Villard <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
@@ -1773,7 +1773,7 @@ F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
 
 ARM/SOCFPGA ARCHITECTURE
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
@@ -1783,7 +1783,7 @@ W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
@@ -2175,56 +2175,56 @@ F:	include/linux/atm*
 F:	include/uapi/linux/atm*
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 
 ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/power/reset/at91-sama5d2_shdwc.c
 
 ATMEL SAMA5D2 ADC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	[email protected]
 S:	Supported
 F:	drivers/iio/adc/at91-sama5d2_adc.c
 
 ATMEL Audio ALSA driver
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	[email protected] (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/atmel
 
 ATMEL XDMA DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/dma/at_xdmac.c
 
 ATMEL I2C DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	[email protected]
 S:	Supported
 F:	drivers/i2c/busses/i2c-at91.c
 
 ATMEL ISI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	[email protected]
 S:	Supported
 F:	drivers/media/platform/soc_camera/atmel-isi.c
 F:	include/media/atmel-isi.h
 
 ATMEL LCDFB DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	[email protected]
 S:	Maintained
 F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -2236,32 +2236,32 @@ S:	Supported
 F:	drivers/mtd/nand/atmel_nand*
 
 ATMEL SDMMC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	[email protected]
 S:	Supported
 F:	drivers/mmc/host/sdhci-of-at91.c
 
 ATMEL SPI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/spi/spi-atmel.*
 
 ATMEL SSC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	[email protected] (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel-ssc.c
 F:	include/linux/atmel-ssc.h
 
 ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	[email protected] (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel_tclib.c
 F:	drivers/clocksource/tcb_clksrc.c
 
 ATMEL USBA UDC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	[email protected] (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
@@ -9736,7 +9736,7 @@ S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.*
 
 PIN CONTROLLER - ATMEL AT91 PIO4
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected]
 S:	Supported
@@ -13065,7 +13065,7 @@ F:	drivers/input/serio/userio.c
 F:	include/uapi/linux/userio.h
 
 VIRTIO CONSOLE DRIVER
-M:	Amit Shah <amit[email protected]>
+M:	Amit Shah <amit@kernel.org>
 L:	[email protected]
 S:	Maintained
 F:	drivers/char/virtio_console.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -799,7 +799,7 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 KBUILD_ARFLAGS := $(call ar-option,D)
 
 # check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
 	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
 endif

arch/arc/kernel/unaligned.c

@@ -243,7 +243,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 
 	/* clear any remanants of delay slot */
 	if (delay_mode(regs)) {
-		regs->ret = regs->bta ~1U;
+		regs->ret = regs->bta & ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;

arch/arm/boot/dts/Makefile

@@ -617,7 +617,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-linkstation-lsgl.dtb \
 	orion5x-linkstation-lswtgl.dtb \
-	orion5x-lschl.dtb \
+	orion5x-linkstation-lschl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-netgear-wnr854t.dtb \

arch/arm/boot/dts/imx1.dtsi

@@ -18,6 +18,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/imx23.dtsi

@@ -16,6 +16,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio0;

arch/arm/boot/dts/imx25.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx27.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;