mmc: via-sdmmc: Respect the cmd->busy_timeout from the mmc core

[ Upstream commit 966244ccd2919e28f25555a77f204cd1c109cad8 ]

Using a fixed 1s timeout for all commands (and data transfers) is a bit
problematic.

For some commands it means waiting longer than needed for the timer to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
1s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Bruce Chang <[email protected]>
Cc: Harald Welte <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

drivers/mmc/host/via-sdmmc.c

@@ -323,6 +323,8 @@ struct via_crdr_mmc_host {
 /* some devices need a very long delay for power to stabilize */
 #define VIA_CRDR_QUIRK_300MS_PWRDELAY	0x0001
 
+#define VIA_CMD_TIMEOUT_MS		1000
+
 static const struct pci_device_id via_ids[] = {
 	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
@@ -555,14 +557,17 @@ static void via_sdc_send_command(struct via_crdr_mmc_host *host,
 {
 	void __iomem *addrbase;
 	struct mmc_data *data;
+	unsigned int timeout_ms;
 	u32 cmdctrl = 0;
 
 	WARN_ON(host->cmd);
 
 	data = cmd->data;
-	mod_timer(&host->timer, jiffies + HZ);
 	host->cmd = cmd;
 
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout : VIA_CMD_TIMEOUT_MS;
+	mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
+
 	/*Command index*/
 	cmdctrl = cmd->opcode << 8;