Merge branch 'android-4.19-stable' of https://android.googlesource.co…

…m/kernel/common into 11 4.19.217 --> 4.19.224
akeromi · Jan 8, 2022 · 823e3c2 · 823e3c2
2 parents db06d5c + 523769c
commit 823e3c2
Show file tree

Hide file tree

Showing 681 changed files with 89,986 additions and 87,831 deletions.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
@@ -1455,6 +1455,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -2044,8 +2046,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -5322,6 +5328,13 @@
 			with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
 			Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.

diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
@@ -191,11 +191,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.

diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
@@ -30,8 +30,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 217
+SUBLEVEL = 224
 EXTRAVERSION =
 NAME = "People's Front"
 
@@ -1361,7 +1361,7 @@ endef
 
 define filechk_version.h
 	(echo \#define LINUX_VERSION_CODE $(shell                         \
-	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 255); \
 	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 endef
 

diff --git a/android/abi_gki_aarch64.xml b/android/abi_gki_aarch64.xml
diff --git a/arch/Kconfig b/arch/Kconfig
@@ -1021,6 +1021,7 @@ config HAVE_ARCH_PREL32_RELOCATIONS
 	  architectures, and don't require runtime relocation on relocatable
 	  kernels.
 
+
 config PANIC_ON_REFCOUNT_ERROR
 	bool "Kernel panic on refcount error detection"
 	depends on REFCOUNT_FULL

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
@@ -74,15 +74,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3
@@ -96,19 +96,19 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)

diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -269,7 +269,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -239,6 +239,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -384,7 +386,7 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;

diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -68,6 +68,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -364,7 +364,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};

diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -25,7 +25,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -23,7 +23,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -131,7 +131,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -136,7 +136,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -181,7 +181,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -87,7 +87,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -128,7 +128,7 @@
         flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -249,7 +249,7 @@
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -266,7 +266,7 @@
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;

diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
@@ -280,6 +280,14 @@ tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr
 	tlb_add_flush(tlb, addr);
 }
 
+static inline void
+tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
+		    unsigned long size)
+{
+	tlb_add_flush(tlb, address);
+	tlb_add_flush(tlb, address + size - PMD_SIZE);
+}
+
 #define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
 #define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
 #define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
@@ -620,11 +620,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -633,7 +631,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 

diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
@@ -53,8 +53,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	frame->sp = frame->fp;
 	frame->fp = *(unsigned long *)(fp);
-	frame->pc = frame->lr;
-	frame->lr = *(unsigned long *)(fp + 4);
+	frame->pc = *(unsigned long *)(fp + 4);
 #else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
@@ -48,7 +48,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;
 
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
 
 extern unsigned long socfpga_cpu1start_addr;
 

diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
@@ -31,14 +31,14 @@
 
 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -56,12 +56,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
@@ -751,7 +751,7 @@ config CPU_BIG_ENDIAN
 config CPU_ENDIAN_BE8
 	bool
 	depends on CPU_BIG_ENDIAN
-	default CPU_V6 || CPU_V6K || CPU_V7
+	default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
 	help
 	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.