Merge 4.17-rc6 into usb-next

We want the bug fixes and this resolves the merge issues with the usbip driver. Signed-off-by: Greg Kroah-Hartman <[email protected]>
akeromi · May 21, 2018 · c049ffb · c049ffb
2 parents baf12d6 + 771c577
commit c049ffb
Show file tree

Hide file tree

Showing 491 changed files with 5,170 additions and 2,235 deletions.
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
@@ -244,3 +244,11 @@ Description:    read only
                 Returns 1 if the psl timebase register is synchronized
                 with the core timebase register, 0 otherwise.
 Users:          https://github.com/ibm-capi/libcxl
+
+What:           /sys/class/cxl/<card>/tunneled_ops_supported
+Date:           May 2018
+Contact:        [email protected]
+Description:    read only
+                Returns 1 if tunneled operations are supported in capi mode,
+                0 otherwise.
+Users:          https://github.com/ibm-capi/libcxl
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -145,7 +145,7 @@ feature enabled.]
 
 In this mode ``intel_pstate`` registers utilization update callbacks with the
 CPU scheduler in order to run a P-state selection algorithm, either
-``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
+``powersave`` or ``performance``, depending on the ``scaling_governor`` policy
 setting in ``sysfs``.  The current CPU frequency information to be made
 available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
 periodically updated by those utilization update callbacks too.

diff --git a/Documentation/admin-guide/pm/sleep-states.rst b/Documentation/admin-guide/pm/sleep-states.rst
@@ -15,7 +15,7 @@ Sleep States That Can Be Supported
 ==================================
 
 Depending on its configuration and the capabilities of the platform it runs on,
-the Linux kernel can support up to four system sleep states, includig
+the Linux kernel can support up to four system sleep states, including
 hibernation and up to three variants of system suspend.  The sleep states that
 can be supported by the kernel are listed below.
 

diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
@@ -264,7 +264,10 @@ i) Constructor
 			   data device, but just remove the mapping.
 
       read_only: Don't allow any changes to be made to the pool
-		 metadata.
+		 metadata.  This mode is only available after the
+		 thin-pool has been created and first used in full
+		 read/write mode.  It cannot be specified on initial
+		 thin-pool creation.
 
       error_if_no_space: Error IOs, instead of queueing, if no space.
 

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -30,7 +30,6 @@ compatible:
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
 - clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"

diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt
@@ -38,7 +38,7 @@ Display Timings
   require specific display timings. The panel-timing subnode expresses those
   timings as specified in the timing subnode section of the display timing
   bindings defined in
-  Documentation/devicetree/bindings/display/display-timing.txt.
+  Documentation/devicetree/bindings/display/panel/display-timing.txt.
 
 
 Connectivity

diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -26,6 +26,7 @@ Required Properties:
 		- "renesas,dmac-r8a7794" (R-Car E2)
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
+		- "renesas,dmac-r8a77965" (R-Car M3-N)
 		- "renesas,dmac-r8a77970" (R-Car V3M)
 		- "renesas,dmac-r8a77980" (R-Car V3H)
 

diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
@@ -5,7 +5,9 @@ Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
-  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
+  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+  - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
+  - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
 
   When compatible with the generic version, nodes must list the
   SoC-specific version corresponding to the platform first, followed by the

diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -21,9 +21,10 @@ Required properties:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
 	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
 	- MG clock (only for armada-7k-pp2)
+	- MG Core clock (only for armada-7k-pp2)
 	- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
-  and "axi_clk" (the 2 latter only for armada-7k-pp2).
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+  "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
 
 The ethernet ports are represented by subnodes. At least one port is
 required.
@@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
 	reg = <0x0 0x100000>, <0x129000 0xb000>;
 	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
-		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
-	clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
+		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
 
 	eth0: eth0 {
 		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -18,6 +18,7 @@ Required properties:
 
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
       - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.

diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -56,9 +56,9 @@ pins it needs, and how they should be configured, with regard to muxer
 configuration, drive strength and pullups. If one of these options is
 not set, its actual value will be unspecified.
 
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
 
 Required sub-node properties:
   - pins

diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -43,6 +43,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
+    - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
     - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
     - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -182,6 +182,7 @@ karo	Ka-Ro electronics GmbH
 keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
 khadas	Khadas
+kiebackpeter    Kieback & Peter GmbH
 kinetic Kinetic Technologies
 kingnovel	Kingnovel Technology Co., Ltd.
 kosagi	Sutajio Ko-Usagi PTE Ltd.

diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
@@ -98,6 +98,14 @@ Finally, if you need to remove all overlays in one-go, just call
 of_overlay_remove_all() which will remove every single one in the correct
 order.
 
+In addition, there is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+Note that a notifier callback is not supposed to store pointers to a device
+tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
+respective node it received.
+
 Overlay DTS Format
 ------------------
 

diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt
@@ -72,8 +72,8 @@ KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
 
 flag                               || value || meaning
 ==================================================================================
-KVM_HINTS_DEDICATED                ||     0 || guest checks this feature bit to
-                                   ||       || determine if there is vCPU pinning
-                                   ||       || and there is no vCPU over-commitment,
+KVM_HINTS_REALTIME                 ||     0 || guest checks this feature bit to
+                                   ||       || determine that vCPUs are never
+                                   ||       || preempted for an unlimited time,
                                    ||       || allowing optimizations
 ----------------------------------------------------------------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -137,9 +137,9 @@ Maintainers List (try to look for most precise areas first)
 		-----------------------------------
 
 3C59X NETWORK DRIVER
-M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
+M:	Steffen Klassert <klassert@kernel.org>
 L:	[email protected]
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/networking/vortex.txt
 F:	drivers/net/ethernet/3com/3c59x.c
 
@@ -3691,7 +3691,6 @@ F:	drivers/cpufreq/arm_big_little_dt.c
 
 CPU POWER MONITORING SUBSYSTEM
 M:	Thomas Renninger <[email protected]>
-M:	Shuah Khan <[email protected]>
 M:	Shuah Khan <[email protected]>
 L:	[email protected]
 S:	Maintained
@@ -4310,7 +4309,7 @@ F:	Documentation/driver-api/dma-buf.rst
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M:	Vinod Koul <[email protected]>
+M:	Vinod Koul <[email protected]>
 L:	[email protected]
 Q:	https://patchwork.kernel.org/project/linux-dmaengine/list/
 S:	Maintained
@@ -7696,10 +7695,10 @@ F:	include/linux/sunrpc/
 F:	include/uapi/linux/sunrpc/
 
 KERNEL SELFTEST FRAMEWORK
-M:	Shuah Khan <[email protected]>
 M:	Shuah Khan <[email protected]>
 L:	[email protected]
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
+Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
 S:	Maintained
 F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*
@@ -9873,7 +9872,7 @@ F:	include/linux/platform_data/nxp-nci.h
 F:	Documentation/devicetree/bindings/net/nfc/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <trond.myklebust@primarydata.com>
+M:	Trond Myklebust <trond.myklebust@hammerspace.com>
 M:	Anna Schumaker <[email protected]>
 L:	[email protected]
 W:	http://client.linux-nfs.org
@@ -12223,7 +12222,7 @@ F:	Documentation/s390/vfio-ccw.txt
 F:	include/uapi/linux/vfio_ccw.h
 
 S390 ZCRYPT DRIVER
-M:	Harald Freudenberger <freude@de.ibm.com>
+M:	Harald Freudenberger <freude@linux.ibm.com>
 L:	[email protected]
 W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
@@ -13267,6 +13266,12 @@ M:	Jan-Benedict Glaw <[email protected]>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
+ST STM32 I2C/SMBUS DRIVER
+M:	Pierre-Yves MORDRET <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/i2c/busses/i2c-stm32*
+
 STABLE BRANCH
 M:	Greg Kroah-Hartman <[email protected]>
 L:	[email protected]
@@ -14651,7 +14656,6 @@ F:	drivers/usb/common/usb-otg-fsm.c
 
 USB OVER IP DRIVER
 M:	Valentina Manea <[email protected]>
-M:	Shuah Khan <[email protected]>
 M:	Shuah Khan <[email protected]>
 L:	[email protected]
 S:	Maintained

diff --git a/Makefile b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 17
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Merciless Moray
 
 # *DOCUMENTATION*

diff --git a/arch/Kconfig b/arch/Kconfig
@@ -464,6 +464,10 @@ config GCC_PLUGIN_LATENT_ENTROPY
 config GCC_PLUGIN_STRUCTLEAK
 	bool "Force initialization of variables containing userspace addresses"
 	depends on GCC_PLUGINS
+	# Currently STRUCTLEAK inserts initialization out of live scope of
+	# variables from KASAN point of view. This leads to KASAN false
+	# positive reports. Prohibit this combination for now.
+	depends on !KASAN_EXTRA
 	help
 	  This plugin zero-initializes any structures containing a
 	  __user attribute. This can prevent some classes of information

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
@@ -117,11 +117,9 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
-		perl -e 'while (<>) { \
-			$$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \
-			$$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \
-		}; printf "%d\n", $$bss_end - $$bss_start;')
+KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
@@ -29,19 +29,19 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c1, c0, 0
@@ -57,7 +57,7 @@
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
@@ -66,8 +66,8 @@
 #endif
 		.endm
 #else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
+		.macro	loadsp,	rb, tmp1, tmp2
+		addruart \rb, \tmp1, \tmp2
 		.endm
 #endif
 #endif
@@ -561,8 +561,6 @@ not_relocated:	mov	r0, #0
 		bl	decompress_kernel
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
 
 #ifdef CONFIG_ARM_VIRT_EXT
 		mrs	r0, spsr		@ Get saved CPU boot mode
@@ -1297,7 +1295,7 @@ phex:		adr	r3, phexbuf
 		b	1b
 
 @ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
+puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
@@ -1314,8 +1312,8 @@ puts:		loadsp	r3, r1
 @ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
+		loadsp	r3, r1, r0
 		mov	r0, #0
-		loadsp	r3, r1
 		b	2b
 
 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@@ -1365,6 +1363,8 @@ __hyp_reentry_vectors:
 
 __enter_kernel:
 		mov	r0, #0			@ must be 0
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
  ARM(		mov	pc, r4		)	@ call kernel
  M_CLASS(	add	r4, r4, #1	)	@ enter in Thumb mode for M class
  THUMB(		bx	r4		)	@ entry point is always ARM for A/R classes

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -69,7 +69,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
@@ -21,8 +21,8 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
-		device_type = "memory";
+	memory@c0000000 {
+		/* 128 MB DDR2 SDRAM @ 0xc0000000 */
 		reg = <0xc0000000 0x08000000>;
 	};