Merge tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
 "Here are a number of small fixes for staging and IIO drivers that
  resolve reported problems.

  Full details are in the shortlog.  All of these have been in
  linux-next with no reported issues"

* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
  arm: dts: rockchip: add reset node for the exist saradc SoCs
  arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
  iio: adc: rockchip_saradc: reset saradc controller before programming it
  iio: accel: kxsd9: Fix raw read return
  iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
  iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
  include/linux: fix excess fence.h kernel-doc notation
  staging: wilc1000: correctly check if associatedsta has not been found
  staging: wilc1000: NULL dereference on error
  staging: wilc1000: txq_event: Fix coding error
  MAINTAINERS: Add file patterns for ion device tree bindings
  MAINTAINERS: Update maintainer entry for wilc1000
  iio: chemical: atlas-ph-sensor: fix typo in val assignment
  iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
  staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
  staging: comedi: dt2811: fix a precedence bug
  staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
  staging: comedi: ni_mio_common: fix wrong insn_write handler
  staging: comedi: comedi_test: fix timer race conditions
  staging: comedi: daqboard2000: bug fix board type matching code
  ...

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -16,13 +16,20 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
 		reg = <0x2006c000 0x100>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

MAINTAINERS

@@ -798,6 +798,7 @@ M:	Laura Abbott <[email protected]>
 M:	Sumit Semwal <[email protected]>
 L:	[email protected]
 S:	Supported
+F:	Documentation/devicetree/bindings/staging/ion/
 F:	drivers/staging/android/ion
 F:	drivers/staging/android/uapi/ion.h
 F:	drivers/staging/android/uapi/ion_test.h
@@ -11232,12 +11233,8 @@ S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
 STAGING - WILC1000 WIFI DRIVER
-M:	Johnny Kim <[email protected]>
-M:	Austin Shin <[email protected]>
-M:	Chris Park <[email protected]>
-M:	Tony Cho <[email protected]>
-M:	Glen Lee <[email protected]>
-M:	Leo Kim <[email protected]>
+M:	Aditya Shankar <[email protected]>
+M:	Ganesh Krishna <[email protected]>
 L:	[email protected]
 S:	Supported
 F:	drivers/staging/wilc1000/

arch/arm/boot/dts/rk3066a.dtsi

@@ -197,6 +197,8 @@
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3288.dtsi

@@ -279,6 +279,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3xxx.dtsi

@@ -399,6 +399,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -270,6 +270,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

drivers/iio/accel/Kconfig

@@ -20,6 +20,8 @@ config BMA180
 config BMA220
     tristate "Bosch BMA220 3-Axis Accelerometer Driver"
 	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
     help
       Say yes here to add support for the Bosch BMA220 triaxial
       acceleration sensor.
@@ -234,7 +236,8 @@ config STK8312
 config STK8BA50
 	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 	depends on I2C
-	depends on IIO_TRIGGER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to get support for the Sensortek STK8BA50 3-axis
 	  accelerometer.

drivers/iio/accel/bma220_spi.c

@@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 					 bma220_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "iio triggered buffer setup failed\n");

drivers/iio/accel/kxsd9.c

@@ -160,6 +160,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto error_ret;
 		*val = ret;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));

drivers/iio/adc/Kconfig

@@ -389,6 +389,7 @@ config QCOM_SPMI_VADC
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
+	depends on RESET_CONTROLLER
 	help
 	  Say yes here to build support for the SARADC found in SoCs from
 	  Rockchip.

drivers/iio/adc/ad799x.c

@@ -527,6 +527,7 @@ static struct attribute_group ad799x_event_attrs_group = {
 static const struct iio_info ad7991_info = {
 	.read_raw = &ad799x_read_raw,
 	.driver_module = THIS_MODULE,
+	.update_scan_mode = ad799x_update_scan_mode,
 };
 
 static const struct iio_info ad7993_4_7_8_noirq_info = {

drivers/iio/adc/at91_adc.c

@@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
 		st->ts_bufferedmeasure = false;
 		input_report_key(st->ts_input, BTN_TOUCH, 0);
 		input_sync(st->ts_input);
-	} else if (status & AT91_ADC_EOC(3)) {
-		/* Conversion finished */
+	} else if (status & AT91_ADC_EOC(3) && st->ts_input) {
+		/* Conversion finished and we've a touchscreen */
 		if (st->ts_bufferedmeasure) {
 			/*
 			 * Last measurement is always discarded, since it can

drivers/iio/adc/rockchip_saradc.c

@@ -21,6 +21,8 @@
 #include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
 #include <linux/regulator/consumer.h>
 #include <linux/iio/iio.h>
 
@@ -53,6 +55,7 @@ struct rockchip_saradc {
 	struct clk		*clk;
 	struct completion	completion;
 	struct regulator	*vref;
+	struct reset_control	*reset;
 	const struct rockchip_saradc_data *data;
 	u16			last_val;
 };
@@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
 
+/**
+ * Reset SARADC Controller.
+ */
+static void rockchip_saradc_reset_controller(struct reset_control *reset)
+{
+	reset_control_assert(reset);
+	usleep_range(10, 20);
+	reset_control_deassert(reset);
+}
+
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
 	struct rockchip_saradc *info = NULL;
@@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
+	/*
+	 * The reset should be an optional property, as it should work
+	 * with old devicetrees as well
+	 */
+	info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
+	if (IS_ERR(info->reset)) {
+		ret = PTR_ERR(info->reset);
+		if (ret != -ENOENT)
+			return ret;
+
+		dev_dbg(&pdev->dev, "no reset control found\n");
+		info->reset = NULL;
+	}
+
 	init_completion(&info->completion);
 
 	irq = platform_get_irq(pdev, 0);
@@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->vref);
 	}
 
+	if (info->reset)
+		rockchip_saradc_reset_controller(info->reset);
+
 	/*
 	 * Use a default value for the converter clock.
 	 * This may become user-configurable in the future.

drivers/iio/adc/ti-ads1015.c

@@ -489,7 +489,8 @@ static struct iio_info ads1115_info = {
 #ifdef CONFIG_OF
 static int ads1015_get_channels_config_of(struct i2c_client *client)
 {
-	struct ads1015_data *data = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
 	struct device_node *node;
 
 	if (!client->dev.of_node ||

drivers/iio/adc/ti_am335x_adc.c

@@ -32,6 +32,7 @@
 
 struct tiadc_device {
 	struct ti_tscadc_dev *mfd_tscadc;
+	struct mutex fifo1_lock; /* to protect fifo access */
 	int channels;
 	u8 channel_line[8];
 	u8 channel_step[8];
@@ -359,6 +360,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		int *val, int *val2, long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int ret = IIO_VAL_INT;
 	int i, map_val;
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
@@ -372,13 +374,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	if (!step_en)
 		return -EINVAL;
 
+	mutex_lock(&adc_dev->fifo1_lock);
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	while (fifo1count--)
 		tiadc_readl(adc_dev, REG_FIFO1);
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + usecs_to_jiffies
+	timeout = jiffies + msecs_to_jiffies
 				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
 	while (1) {
@@ -388,7 +391,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 		if (time_after(jiffies, timeout)) {
 			am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
-			return -EAGAIN;
+			ret = -EAGAIN;
+			goto err_unlock;
 		}
 	}
 	map_val = adc_dev->channel_step[chan->scan_index];
@@ -414,8 +418,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (found == false)
-		return -EBUSY;
-	return IIO_VAL_INT;
+		ret =  -EBUSY;
+
+err_unlock:
+	mutex_unlock(&adc_dev->fifo1_lock);
+	return ret;
 }
 
 static const struct iio_info tiadc_info = {
@@ -483,6 +490,7 @@ static int tiadc_probe(struct platform_device *pdev)
 
 	tiadc_step_config(indio_dev);
 	tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
+	mutex_init(&adc_dev->fifo1_lock);
 
 	err = tiadc_channel_init(indio_dev, adc_dev->channels);
 	if (err < 0)

drivers/iio/chemical/atlas-ph-sensor.c

@@ -434,7 +434,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 			break;
 		case IIO_ELECTRICALCONDUCTIVITY:
 			*val = 1; /* 0.00001 */
-			*val = 100000;
+			*val2 = 100000;
 			break;
 		case IIO_CONCENTRATION:
 			*val = 0; /* 0.000000001 */

drivers/iio/dac/stx104.c

@@ -65,6 +65,16 @@ struct stx104_gpio {
 	unsigned int out_state;
 };
 
+/**
+ * struct stx104_dev - STX104 device private data structure
+ * @indio_dev:	IIO device
+ * @chip:	instance of the gpio_chip
+ */
+struct stx104_dev {
+	struct iio_dev *indio_dev;
+	struct gpio_chip *chip;
+};
+
 static int stx104_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
@@ -107,6 +117,7 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = {
 static int stx104_gpio_get_direction(struct gpio_chip *chip,
 	unsigned int offset)
 {
+	/* GPIO 0-3 are input only, while the rest are output only */
 	if (offset < 4)
 		return 1;
 
@@ -169,6 +180,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	struct iio_dev *indio_dev;
 	struct stx104_iio *priv;
 	struct stx104_gpio *stx104gpio;
+	struct stx104_dev *stx104dev;
 	int err;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
@@ -179,6 +191,10 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	if (!stx104gpio)
 		return -ENOMEM;
 
+	stx104dev = devm_kzalloc(dev, sizeof(*stx104dev), GFP_KERNEL);
+	if (!stx104dev)
+		return -ENOMEM;
+
 	if (!devm_request_region(dev, base[id], STX104_EXTENT,
 		dev_name(dev))) {
 		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -199,12 +215,6 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	outw(0, base[id] + 4);
 	outw(0, base[id] + 6);
 
-	err = devm_iio_device_register(dev, indio_dev);
-	if (err) {
-		dev_err(dev, "IIO device registering failed (%d)\n", err);
-		return err;
-	}
-
 	stx104gpio->chip.label = dev_name(dev);
 	stx104gpio->chip.parent = dev;
 	stx104gpio->chip.owner = THIS_MODULE;
@@ -220,22 +230,32 @@ static int stx104_probe(struct device *dev, unsigned int id)
 
 	spin_lock_init(&stx104gpio->lock);
 
-	dev_set_drvdata(dev, stx104gpio);
+	stx104dev->indio_dev = indio_dev;
+	stx104dev->chip = &stx104gpio->chip;
+	dev_set_drvdata(dev, stx104dev);
 
 	err = gpiochip_add_data(&stx104gpio->chip, stx104gpio);
 	if (err) {
 		dev_err(dev, "GPIO registering failed (%d)\n", err);
 		return err;
 	}
 
+	err = iio_device_register(indio_dev);
+	if (err) {
+		dev_err(dev, "IIO device registering failed (%d)\n", err);
+		gpiochip_remove(&stx104gpio->chip);
+		return err;
+	}
+
 	return 0;
 }
 
 static int stx104_remove(struct device *dev, unsigned int id)
 {
-	struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev);
+	struct stx104_dev *const stx104dev = dev_get_drvdata(dev);
 
-	gpiochip_remove(&stx104gpio->chip);
+	iio_device_unregister(stx104dev->indio_dev);
+	gpiochip_remove(stx104dev->chip);
 
 	return 0;
 }

drivers/iio/humidity/Kconfig

@@ -6,6 +6,8 @@ menu "Humidity sensors"
 config AM2315
     tristate "Aosong AM2315 relative humidity and temperature sensor"
     depends on I2C
+    select IIO_BUFFER
+    select IIO_TRIGGERED_BUFFER
     help
       If you say yes here you get support for the Aosong AM2315
       relative humidity and ambient temperature sensor.