Merge tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/li…

…nux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

 - Remove support for running as 32-bit Xen PV-guest.

   32-bit PV guests are rarely used, are lacking security fixes for
   Meltdown, and can be easily replaced by PVH mode. Another series for
   doing more cleanup will follow soon (removal of 32-bit-only pvops
   functionality).

 - Fixes and additional features for the Xen display frontend driver.

* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drm/xen-front: Pass dumb buffer data offset to the backend
  xen: Sync up with the canonical protocol definition in Xen
  drm/xen-front: Add YUYV to supported formats
  drm/xen-front: Fix misused IS_ERR_OR_NULL checks
  xen/gntdev: Fix dmabuf import with non-zero sgt offset
  x86/xen: drop tests for highmem in pv code
  x86/xen: eliminate xen-asm_64.S
  x86/xen: remove 32-bit Xen PV guest support

arch/x86/entry/entry_32.S

@@ -449,8 +449,6 @@
 
 .macro SWITCH_TO_KERNEL_STACK
 
-	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
-
 	BUG_IF_WRONG_CR3
 
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
@@ -599,8 +597,6 @@
  */
 .macro SWITCH_TO_ENTRY_STACK
 
-	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
-
 	/* Bytes to copy */
 	movl	$PTREGS_SIZE, %ecx
 
@@ -872,17 +868,6 @@ SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
  * will ignore all of the single-step traps generated in this range.
  */
 
-#ifdef CONFIG_XEN_PV
-/*
- * Xen doesn't set %esp to be precisely what the normal SYSENTER
- * entry point expects, so fix it up before using the normal path.
- */
-SYM_CODE_START(xen_sysenter_target)
-	addl	$5*4, %esp			/* remove xen-provided frame */
-	jmp	.Lsysenter_past_esp
-SYM_CODE_END(xen_sysenter_target)
-#endif
-
 /*
  * 32-bit SYSENTER entry.
  *
@@ -965,9 +950,8 @@ SYM_FUNC_START(entry_SYSENTER_32)
 
 	movl	%esp, %eax
 	call	do_SYSENTER_32
-	/* XEN PV guests always use IRET path */
-	ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
-		    "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
+	testl	%eax, %eax
+	jz	.Lsyscall_32_done
 
 	STACKLEAK_ERASE
 
@@ -1165,95 +1149,6 @@ SYM_FUNC_END(entry_INT80_32)
 #endif
 .endm
 
-#ifdef CONFIG_PARAVIRT
-SYM_CODE_START(native_iret)
-	iret
-	_ASM_EXTABLE(native_iret, asm_iret_error)
-SYM_CODE_END(native_iret)
-#endif
-
-#ifdef CONFIG_XEN_PV
-/*
- * See comment in entry_64.S for further explanation
- *
- * Note: This is not an actual IDT entry point. It's a XEN specific entry
- * point and therefore named to match the 64-bit trampoline counterpart.
- */
-SYM_FUNC_START(xen_asm_exc_xen_hypervisor_callback)
-	/*
-	 * Check to see if we got the event in the critical
-	 * region in xen_iret_direct, after we've reenabled
-	 * events and checked for pending events.  This simulates
-	 * iret instruction's behaviour where it delivers a
-	 * pending interrupt when enabling interrupts:
-	 */
-	cmpl	$xen_iret_start_crit, (%esp)
-	jb	1f
-	cmpl	$xen_iret_end_crit, (%esp)
-	jae	1f
-	call	xen_iret_crit_fixup
-1:
-	pushl	$-1				/* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	ENCODE_FRAME_POINTER
-
-	mov	%esp, %eax
-	call	xen_pv_evtchn_do_upcall
-	jmp	handle_exception_return
-SYM_FUNC_END(xen_asm_exc_xen_hypervisor_callback)
-
-/*
- * Hypervisor uses this for application faults while it executes.
- * We get here for two reasons:
- *  1. Fault while reloading DS, ES, FS or GS
- *  2. Fault while executing IRET
- * Category 1 we fix up by reattempting the load, and zeroing the segment
- * register if the load fails.
- * Category 2 we fix up by jumping to do_iret_error. We cannot use the
- * normal Linux return path in this case because if we use the IRET hypercall
- * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
- * We distinguish between categories by maintaining a status value in EAX.
- */
-SYM_FUNC_START(xen_failsafe_callback)
-	pushl	%eax
-	movl	$1, %eax
-1:	mov	4(%esp), %ds
-2:	mov	8(%esp), %es
-3:	mov	12(%esp), %fs
-4:	mov	16(%esp), %gs
-	/* EAX == 0 => Category 1 (Bad segment)
-	   EAX != 0 => Category 2 (Bad IRET) */
-	testl	%eax, %eax
-	popl	%eax
-	lea	16(%esp), %esp
-	jz	5f
-	jmp	asm_iret_error
-5:	pushl	$-1				/* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	ENCODE_FRAME_POINTER
-	jmp	handle_exception_return
-
-.section .fixup, "ax"
-6:	xorl	%eax, %eax
-	movl	%eax, 4(%esp)
-	jmp	1b
-7:	xorl	%eax, %eax
-	movl	%eax, 8(%esp)
-	jmp	2b
-8:	xorl	%eax, %eax
-	movl	%eax, 12(%esp)
-	jmp	3b
-9:	xorl	%eax, %eax
-	movl	%eax, 16(%esp)
-	jmp	4b
-.previous
-	_ASM_EXTABLE(1b, 6b)
-	_ASM_EXTABLE(2b, 7b)
-	_ASM_EXTABLE(3b, 8b)
-	_ASM_EXTABLE(4b, 9b)
-SYM_FUNC_END(xen_failsafe_callback)
-#endif /* CONFIG_XEN_PV */
-
 SYM_CODE_START_LOCAL_NOALIGN(handle_exception)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1

arch/x86/entry/vdso/vdso32/note.S

@@ -16,33 +16,3 @@ ELFNOTE_START(Linux, 0, "a")
 ELFNOTE_END
 
 BUILD_SALT
-
-#ifdef CONFIG_XEN
-/*
- * Add a special note telling glibc's dynamic linker a fake hardware
- * flavor that it will use to choose the search path for libraries in the
- * same way it uses real hardware capabilities like "mmx".
- * We supply "nosegneg" as the fake capability, to indicate that we
- * do not like negative offsets in instructions using segment overrides,
- * since we implement those inefficiently.  This makes it possible to
- * install libraries optimized to avoid those access patterns in someplace
- * like /lib/i686/tls/nosegneg.  Note that an /etc/ld.so.conf.d/file
- * corresponding to the bits here is needed to make ldconfig work right.
- * It should contain:
- *	hwcap 1 nosegneg
- * to match the mapping of bit to name that we give here.
- *
- * At runtime, the fake hardware feature will be considered to be present
- * if its bit is set in the mask word.  So, we start with the mask 0, and
- * at boot time we set VDSO_NOTE_NONEGSEG_BIT if running under Xen.
- */
-
-#include "../../xen/vdso.h"	/* Defines VDSO_NOTE_NONEGSEG_BIT.  */
-
-ELFNOTE_START(GNU, 2, "a")
-	.long 1			/* ncaps */
-VDSO32_NOTE_MASK:		/* Symbol used by arch/x86/xen/setup.c */
-	.long 0			/* mask */
-	.byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg"	/* bit, name */
-ELFNOTE_END
-#endif

arch/x86/include/asm/proto.h

@@ -25,7 +25,7 @@ void entry_SYSENTER_compat(void);
 void __end_entry_SYSENTER_compat(void);
 void entry_SYSCALL_compat(void);
 void entry_INT80_compat(void);
-#if defined(CONFIG_X86_64) && defined(CONFIG_XEN_PV)
+#ifdef CONFIG_XEN_PV
 void xen_entry_INT80_compat(void);
 #endif
 #endif

arch/x86/include/asm/segment.h

@@ -301,7 +301,7 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)
 extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
 extern void early_ignore_irq(void);
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_XEN_PV)
+#ifdef CONFIG_XEN_PV
 extern const char xen_early_idt_handler_array[NUM_EXCEPTION_VECTORS][XEN_EARLY_IDT_HANDLER_SIZE];
 #endif
 

arch/x86/kernel/head_32.S

@@ -134,38 +134,7 @@ SYM_CODE_START(startup_32)
 	movl %eax,pa(initial_page_table+0xffc)
 #endif
 
-#ifdef CONFIG_PARAVIRT
-	/* This is can only trip for a broken bootloader... */
-	cmpw $0x207, pa(boot_params + BP_version)
-	jb .Ldefault_entry
-
-	/* Paravirt-compatible boot parameters.  Look to see what architecture
-		we're booting under. */
-	movl pa(boot_params + BP_hardware_subarch), %eax
-	cmpl $num_subarch_entries, %eax
-	jae .Lbad_subarch
-
-	movl pa(subarch_entries)(,%eax,4), %eax
-	subl $__PAGE_OFFSET, %eax
-	jmp *%eax
-
-.Lbad_subarch:
-SYM_INNER_LABEL_ALIGN(xen_entry, SYM_L_WEAK)
-	/* Unknown implementation; there's really
-	   nothing we can do at this point. */
-	ud2a
-
-	__INITDATA
-
-subarch_entries:
-	.long .Ldefault_entry		/* normal x86/PC */
-	.long xen_entry			/* Xen hypervisor */
-	.long .Ldefault_entry		/* Moorestown MID */
-num_subarch_entries = (. - subarch_entries) / 4
-.previous
-#else
 	jmp .Ldefault_entry
-#endif /* CONFIG_PARAVIRT */
 SYM_CODE_END(startup_32)
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/x86/xen/Kconfig

@@ -19,6 +19,7 @@ config XEN_PV
 	bool "Xen PV guest support"
 	default y
 	depends on XEN
+	depends on X86_64
 	select PARAVIRT_XXL
 	select XEN_HAVE_PVMMU
 	select XEN_HAVE_VPMU
@@ -50,7 +51,7 @@ config XEN_PVHVM_SMP
 
 config XEN_512GB
 	bool "Limit Xen pv-domain memory to 512GB"
-	depends on XEN_PV && X86_64
+	depends on XEN_PV
 	default y
 	help
 	  Limit paravirtualized user domains to 512GB of RAM.

arch/x86/xen/Makefile

@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-OBJECT_FILES_NON_STANDARD_xen-asm_$(BITS).o := y
+OBJECT_FILES_NON_STANDARD_xen-asm.o := y
 
 ifdef CONFIG_FUNCTION_TRACER
 # Do not profile debug and lowlevel utilities
@@ -33,7 +33,6 @@ obj-$(CONFIG_XEN_PV)		+= mmu_pv.o
 obj-$(CONFIG_XEN_PV)		+= irq.o
 obj-$(CONFIG_XEN_PV)		+= multicalls.o
 obj-$(CONFIG_XEN_PV)		+= xen-asm.o
-obj-$(CONFIG_XEN_PV)		+= xen-asm_$(BITS).o
 
 obj-$(CONFIG_XEN_PVH)		+= enlighten_pvh.o
 

arch/x86/xen/apic.c

@@ -60,10 +60,6 @@ static u32 xen_apic_read(u32 reg)
 
 	if (reg == APIC_LVR)
 		return 0x14;
-#ifdef CONFIG_X86_32
-	if (reg == APIC_LDR)
-		return SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-#endif
 	if (reg != APIC_ID)
 		return 0;
 
@@ -129,14 +125,6 @@ static int xen_phys_pkg_id(int initial_apic_id, int index_msb)
 	return initial_apic_id >> index_msb;
 }
 
-#ifdef CONFIG_X86_32
-static int xen_x86_32_early_logical_apicid(int cpu)
-{
-	/* Match with APIC_LDR read. Otherwise setup_local_APIC complains. */
-	return 1 << cpu;
-}
-#endif
-
 static void xen_noop(void)
 {
 }
@@ -199,11 +187,6 @@ static struct apic xen_pv_apic = {
 	.icr_write 			= xen_apic_icr_write,
 	.wait_icr_idle 			= xen_noop,
 	.safe_wait_icr_idle 		= xen_safe_apic_wait_icr_idle,
-
-#ifdef CONFIG_X86_32
-	/* generic_processor_info and setup_local_APIC. */
-	.x86_32_early_logical_apicid	= xen_x86_32_early_logical_apicid,
-#endif
 };
 
 static void __init xen_apic_check(void)