Merge branches 'doc.2019.12.10a', 'exp.2019.12.09a', 'fixes.2020.01.2…

…4a', 'kfree_rcu.2020.01.24a', 'list.2020.01.10a', 'preempt.2020.01.24a' and 'torture.2019.12.09a' into HEAD

doc.2019.12.10a: Documentations updates
exp.2019.12.09a: Expedited grace-period updates
fixes.2020.01.24a: Miscellaneous fixes
kfree_rcu.2020.01.24a: Batch kfree_rcu() work
list.2020.01.10a: RCU-protected-list updates
preempt.2020.01.24a: Preemptible RCU updates
torture.2019.12.09a: Torture-test updates

.mailmap

@@ -207,6 +207,10 @@ Paolo 'Blaisorblade' Giarrusso <[email protected]>
 Patrick Mochel <[email protected]>
 Paul Burton <[email protected]> <[email protected]>
 Paul Burton <[email protected]> <[email protected]>
+Paul E. McKenney <[email protected]> <[email protected]>
+Paul E. McKenney <[email protected]> <[email protected]>
+Paul E. McKenney <[email protected]> <[email protected]>
+Paul E. McKenney <[email protected]> <[email protected]>
 Peter A Jonsson <[email protected]>
 Peter Oruba <[email protected]>
 Peter Oruba <[email protected]>

Documentation/RCU/stallwarn.txt

@@ -225,18 +225,13 @@ an estimate of the total number of RCU callbacks queued across all CPUs
 In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed
 for each CPU:
 
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 Nonlazy posted: ..D
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1
 
 The "last_accelerate:" prints the low-order 16 bits (in hex) of the
 jiffies counter when this CPU last invoked rcu_try_advance_all_cbs()
 from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from
-rcu_prepare_for_idle().  The "Nonlazy posted:" indicates lazy-callback
-status, so that an "l" indicates that all callbacks were lazy at the start
-of the last idle period and an "L" indicates that there are currently
-no non-lazy callbacks (in both cases, "." is printed otherwise, as
-shown above) and "D" indicates that dyntick-idle processing is enabled
-("." is printed otherwise, for example, if disabled via the "nohz="
-kernel boot parameter).
+rcu_prepare_for_idle(). "dyntick_enabled: 1" indicates that dyntick-idle
+processing is enabled.
 
 If the grace period ends just as the stall warning starts printing,
 there will be a spurious stall-warning message, which will include

Documentation/admin-guide/kernel-parameters.txt

@@ -3978,6 +3978,19 @@
 			test until boot completes in order to avoid
 			interference.
 
+	rcuperf.kfree_rcu_test= [KNL]
+			Set to measure performance of kfree_rcu() flooding.
+
+	rcuperf.kfree_nthreads= [KNL]
+			The number of threads running loops of kfree_rcu().
+
+	rcuperf.kfree_alloc_num= [KNL]
+			Number of allocations and frees done in an iteration.
+
+	rcuperf.kfree_loops= [KNL]
+			Number of loops doing rcuperf.kfree_alloc_num number
+			of allocations and frees.
+
 	rcuperf.nreaders= [KNL]
 			Set number of RCU readers.  The value -1 selects
 			N, where N is the number of CPUs.  A value

arch/powerpc/include/asm/barrier.h

@@ -18,8 +18,6 @@
  * mb() prevents loads and stores being reordered across this point.
  * rmb() prevents loads being reordered across this point.
  * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- *	across this point (nop on PPC).
  *
  * *mb() variants without smp_ prefix must order all types of memory
  * operations with one another. sync is the only instruction sufficient

drivers/net/wireless/mediatek/mt76/agg-rx.c

@@ -281,8 +281,8 @@ void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno)
 {
 	struct mt76_rx_tid *tid = NULL;
 
-	rcu_swap_protected(wcid->aggr[tidno], tid,
-			   lockdep_is_held(&dev->mutex));
+	tid = rcu_replace_pointer(wcid->aggr[tidno], tid,
+				  lockdep_is_held(&dev->mutex));
 	if (tid) {
 		mt76_rx_aggr_shutdown(dev, tid);
 		kfree_rcu(tid, rcu_head);

include/linux/list.h

@@ -23,6 +23,13 @@
 #define LIST_HEAD(name) \
 	struct list_head name = LIST_HEAD_INIT(name)
 
+/**
+ * INIT_LIST_HEAD - Initialize a list_head structure
+ * @list: list_head structure to be initialized.
+ *
+ * Initializes the list_head to point to itself.  If it is a list header,
+ * the result is an empty list.
+ */
 static inline void INIT_LIST_HEAD(struct list_head *list)
 {
 	WRITE_ONCE(list->next, list);
@@ -120,12 +127,6 @@ static inline void __list_del_clearprev(struct list_head *entry)
 	entry->prev = NULL;
 }
 
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty() on entry does not return true after this, the entry is
- * in an undefined state.
- */
 static inline void __list_del_entry(struct list_head *entry)
 {
 	if (!__list_del_entry_valid(entry))
@@ -134,6 +135,12 @@ static inline void __list_del_entry(struct list_head *entry)
 	__list_del(entry->prev, entry->next);
 }
 
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty() on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
 static inline void list_del(struct list_head *entry)
 {
 	__list_del_entry(entry);
@@ -157,8 +164,15 @@ static inline void list_replace(struct list_head *old,
 	new->prev->next = new;
 }
 
+/**
+ * list_replace_init - replace old entry by new one and initialize the old one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * If @old was empty, it will be overwritten.
+ */
 static inline void list_replace_init(struct list_head *old,
-					struct list_head *new)
+				     struct list_head *new)
 {
 	list_replace(old, new);
 	INIT_LIST_HEAD(old);
@@ -744,11 +758,36 @@ static inline void INIT_HLIST_NODE(struct hlist_node *h)
 	h->pprev = NULL;
 }
 
+/**
+ * hlist_unhashed - Has node been removed from list and reinitialized?
+ * @h: Node to be checked
+ *
+ * Not that not all removal functions will leave a node in unhashed
+ * state.  For example, hlist_nulls_del_init_rcu() does leave the
+ * node in unhashed state, but hlist_nulls_del() does not.
+ */
 static inline int hlist_unhashed(const struct hlist_node *h)
 {
 	return !h->pprev;
 }
 
+/**
+ * hlist_unhashed_lockless - Version of hlist_unhashed for lockless use
+ * @h: Node to be checked
+ *
+ * This variant of hlist_unhashed() must be used in lockless contexts
+ * to avoid potential load-tearing.  The READ_ONCE() is paired with the
+ * various WRITE_ONCE() in hlist helpers that are defined below.
+ */
+static inline int hlist_unhashed_lockless(const struct hlist_node *h)
+{
+	return !READ_ONCE(h->pprev);
+}
+
+/**
+ * hlist_empty - Is the specified hlist_head structure an empty hlist?
+ * @h: Structure to check.
+ */
 static inline int hlist_empty(const struct hlist_head *h)
 {
 	return !READ_ONCE(h->first);
@@ -761,16 +800,29 @@ static inline void __hlist_del(struct hlist_node *n)
 
 	WRITE_ONCE(*pprev, next);
 	if (next)
-		next->pprev = pprev;
+		WRITE_ONCE(next->pprev, pprev);
 }
 
+/**
+ * hlist_del - Delete the specified hlist_node from its list
+ * @n: Node to delete.
+ *
+ * Note that this function leaves the node in hashed state.  Use
+ * hlist_del_init() or similar instead to unhash @n.
+ */
 static inline void hlist_del(struct hlist_node *n)
 {
 	__hlist_del(n);
 	n->next = LIST_POISON1;
 	n->pprev = LIST_POISON2;
 }
 
+/**
+ * hlist_del_init - Delete the specified hlist_node from its list and initialize
+ * @n: Node to delete.
+ *
+ * Note that this function leaves the node in unhashed state.
+ */
 static inline void hlist_del_init(struct hlist_node *n)
 {
 	if (!hlist_unhashed(n)) {
@@ -779,59 +831,95 @@ static inline void hlist_del_init(struct hlist_node *n)
 	}
 }
 
+/**
+ * hlist_add_head - add a new entry at the beginning of the hlist
+ * @n: new entry to be added
+ * @h: hlist head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
 static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
 {
 	struct hlist_node *first = h->first;
-	n->next = first;
+	WRITE_ONCE(n->next, first);
 	if (first)
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 	WRITE_ONCE(h->first, n);
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 }
 
-/* next must be != NULL */
+/**
+ * hlist_add_before - add a new entry before the one specified
+ * @n: new entry to be added
+ * @next: hlist node to add it before, which must be non-NULL
+ */
 static inline void hlist_add_before(struct hlist_node *n,
-					struct hlist_node *next)
+				    struct hlist_node *next)
 {
-	n->pprev = next->pprev;
-	n->next = next;
-	next->pprev = &n->next;
+	WRITE_ONCE(n->pprev, next->pprev);
+	WRITE_ONCE(n->next, next);
+	WRITE_ONCE(next->pprev, &n->next);
 	WRITE_ONCE(*(n->pprev), n);
 }
 
+/**
+ * hlist_add_behing - add a new entry after the one specified
+ * @n: new entry to be added
+ * @prev: hlist node to add it after, which must be non-NULL
+ */
 static inline void hlist_add_behind(struct hlist_node *n,
 				    struct hlist_node *prev)
 {
-	n->next = prev->next;
-	prev->next = n;
-	n->pprev = &prev->next;
+	WRITE_ONCE(n->next, prev->next);
+	WRITE_ONCE(prev->next, n);
+	WRITE_ONCE(n->pprev, &prev->next);
 
 	if (n->next)
-		n->next->pprev  = &n->next;
+		WRITE_ONCE(n->next->pprev, &n->next);
 }
 
-/* after that we'll appear to be on some hlist and hlist_del will work */
+/**
+ * hlist_add_fake - create a fake hlist consisting of a single headless node
+ * @n: Node to make a fake list out of
+ *
+ * This makes @n appear to be its own predecessor on a headless hlist.
+ * The point of this is to allow things like hlist_del() to work correctly
+ * in cases where there is no list.
+ */
 static inline void hlist_add_fake(struct hlist_node *n)
 {
 	n->pprev = &n->next;
 }
 
+/**
+ * hlist_fake: Is this node a fake hlist?
+ * @h: Node to check for being a self-referential fake hlist.
+ */
 static inline bool hlist_fake(struct hlist_node *h)
 {
 	return h->pprev == &h->next;
 }
 
-/*
+/**
+ * hlist_is_singular_node - is node the only element of the specified hlist?
+ * @n: Node to check for singularity.
+ * @h: Header for potentially singular list.
+ *
  * Check whether the node is the only node of the head without
- * accessing head:
+ * accessing head, thus avoiding unnecessary cache misses.
  */
 static inline bool
 hlist_is_singular_node(struct hlist_node *n, struct hlist_head *h)
 {
 	return !n->next && n->pprev == &h->first;
 }
 
-/*
+/**
+ * hlist_move_list - Move an hlist
+ * @old: hlist_head for old list.
+ * @new: hlist_head for new list.
+ *
  * Move a list from one list head to another. Fixup the pprev
  * reference of the first entry if it exists.
  */

include/linux/list_nulls.h

@@ -56,11 +56,33 @@ static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr)
 	return ((unsigned long)ptr) >> 1;
 }
 
+/**
+ * hlist_nulls_unhashed - Has node been removed and reinitialized?
+ * @h: Node to be checked
+ *
+ * Not that not all removal functions will leave a node in unhashed state.
+ * For example, hlist_del_init_rcu() leaves the node in unhashed state,
+ * but hlist_nulls_del() does not.
+ */
 static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h)
 {
 	return !h->pprev;
 }
 
+/**
+ * hlist_nulls_unhashed_lockless - Has node been removed and reinitialized?
+ * @h: Node to be checked
+ *
+ * Not that not all removal functions will leave a node in unhashed state.
+ * For example, hlist_del_init_rcu() leaves the node in unhashed state,
+ * but hlist_nulls_del() does not.  Unlike hlist_nulls_unhashed(), this
+ * function may be used locklessly.
+ */
+static inline int hlist_nulls_unhashed_lockless(const struct hlist_nulls_node *h)
+{
+	return !READ_ONCE(h->pprev);
+}
+
 static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
 {
 	return is_a_nulls(READ_ONCE(h->first));
@@ -72,10 +94,10 @@ static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
 	struct hlist_nulls_node *first = h->first;
 
 	n->next = first;
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 	h->first = n;
 	if (!is_a_nulls(first))
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 }
 
 static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
@@ -85,13 +107,13 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 
 	WRITE_ONCE(*pprev, next);
 	if (!is_a_nulls(next))
-		next->pprev = pprev;
+		WRITE_ONCE(next->pprev, pprev);
 }
 
 static inline void hlist_nulls_del(struct hlist_nulls_node *n)
 {
 	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
+	WRITE_ONCE(n->pprev, LIST_POISON2);
 }
 
 /**

include/linux/rcu_segcblist.h

@@ -22,7 +22,6 @@ struct rcu_cblist {
 	struct rcu_head *head;
 	struct rcu_head **tail;
 	long len;
-	long len_lazy;
 };
 
 #define RCU_CBLIST_INITIALIZER(n) { .head = NULL, .tail = &n.head }
@@ -73,7 +72,6 @@ struct rcu_segcblist {
 #else
 	long len;
 #endif
-	long len_lazy;
 	u8 enabled;
 	u8 offloaded;
 };