s390/decompressor: add symbols support

Information printed by print_pgm_check_info() is crucial for
debugging decompressor problems. Printing instruction addresses is
better than nothing, but turns further debugging into tedious job of
figuring out which function those addresses correspond to.

This change adds simplistic symbols resolution support. And adds %pS
format specifier support to decompressor_printk().

Decompressor symbols list is extracted and sorted with
nm -n -S:
...
0000000000010000 0000000000000014 T startup
0000000000010014 00000000000000b0 t startup_normal
0000000000010180 00000000000000b2 t startup_kdump
...

Then functions are filtered and contracted to a form:
"10000 14 startup\0""10014 b0 startup_normal\0""10180 b2 startup_kdump\0"
...
Which makes it trivial to find beginning of an entry and names are 0
terminated, so could be used as is. Symbols are binary-searched.

To get symbols list with final addresses and then get it into the
decompressor's image the same trick as for kallsyms is used.
Decompressor's vmlinux is linked twice.

Symbols are stored in .decompressor.syms section, current size is about
2kb.

Reviewed-by: Alexander Egorenkov <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>

arch/s390/boot/compressed/.gitignore

@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 vmlinux
 vmlinux.lds
+vmlinux.syms

arch/s390/boot/compressed/Makefile

@@ -10,21 +10,39 @@ GCOV_PROFILE := n
 UBSAN_SANITIZE := n
 KASAN_SANITIZE := n
 
-obj-y	:= $(if $(CONFIG_KERNEL_UNCOMPRESSED),,decompressor.o) piggy.o info.o
+obj-y	:= $(if $(CONFIG_KERNEL_UNCOMPRESSED),,decompressor.o) info.o
+obj-all := $(obj-y) piggy.o syms.o
 targets	:= vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2
 targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4
-targets += info.bin $(obj-y)
+targets += info.bin syms.bin vmlinux.syms $(obj-all)
 
 KBUILD_AFLAGS := $(KBUILD_AFLAGS_DECOMPRESSOR)
 KBUILD_CFLAGS := $(KBUILD_CFLAGS_DECOMPRESSOR)
 OBJCOPYFLAGS :=
 
 OBJECTS := $(addprefix $(obj)/,$(obj-y))
+OBJECTS_ALL := $(addprefix $(obj)/,$(obj-all))
 
 LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS_ALL) FORCE
 	$(call if_changed,ld)
 
+LDFLAGS_vmlinux.syms := --oformat $(LD_BFD) -e startup -T
+$(obj)/vmlinux.syms: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE
+	$(call if_changed,ld)
+
+quiet_cmd_dumpsyms = DUMPSYMS $<
+define cmd_dumpsyms
+	$(NM) -n -S --format=bsd "$<" | $(PERL) -ne '/(\w+)\s+(\w+)\s+[tT]\s+(\w+)/ and printf "%x %x %s\0",hex $$1,hex $$2,$$3' > "$@"
+endef
+
+$(obj)/syms.bin: $(obj)/vmlinux.syms FORCE
+	$(call if_changed,dumpsyms)
+
+OBJCOPYFLAGS_syms.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section .data=.decompressor.syms
+$(obj)/syms.o: $(obj)/syms.bin FORCE
+	$(call if_changed,objcopy)
+
 OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info --set-section-flags .vmlinux.info=load
 $(obj)/info.bin: vmlinux FORCE
 	$(call if_changed,objcopy)

arch/s390/boot/compressed/vmlinux.lds.S

@@ -82,6 +82,14 @@ SECTIONS
 		*(.vmlinux.info)
 	}
 
+	.decompressor.syms : {
+		. += 1; /* make sure we have \0 before the first entry */
+		. = ALIGN(2);
+		_decompressor_syms_start = .;
+		*(.decompressor.syms)
+		_decompressor_syms_end = .;
+	}
+
 #ifdef CONFIG_KERNEL_UNCOMPRESSED
 	. = 0x100000;
 #else

arch/s390/boot/pgm_check_info.c

@@ -19,6 +19,65 @@ static char *as_hex(char *dst, unsigned long val, int pad)
 	return end;
 }
 
+static char *symstart(char *p)
+{
+	while (*p)
+		p--;
+	return p + 1;
+}
+
+extern char _decompressor_syms_start[], _decompressor_syms_end[];
+static noinline char *findsym(unsigned long ip, unsigned short *off, unsigned short *len)
+{
+	/* symbol entries are in a form "10000 c4 startup\0" */
+	char *a = _decompressor_syms_start;
+	char *b = _decompressor_syms_end;
+	unsigned long start;
+	unsigned long size;
+	char *pivot;
+	char *endp;
+
+	while (a < b) {
+		pivot = symstart(a + (b - a) / 2);
+		start = simple_strtoull(pivot, &endp, 16);
+		size = simple_strtoull(endp + 1, &endp, 16);
+		if (ip < start) {
+			b = pivot;
+			continue;
+		}
+		if (ip > start + size) {
+			a = pivot + strlen(pivot) + 1;
+			continue;
+		}
+		*off = ip - start;
+		*len = size;
+		return endp + 1;
+	}
+	return NULL;
+}
+
+static noinline char *strsym(void *ip)
+{
+	static char buf[64];
+	unsigned short off;
+	unsigned short len;
+	char *p;
+
+	p = findsym((unsigned long)ip, &off, &len);
+	if (p) {
+		strncpy(buf, p, sizeof(buf));
+		/* reserve 15 bytes for offset/len in symbol+0x1234/0x1234 */
+		p = buf + strnlen(buf, sizeof(buf) - 15);
+		strcpy(p, "+0x");
+		p = as_hex(p + 3, off, 0);
+		strcpy(p, "/0x");
+		as_hex(p + 3, len, 0);
+	} else {
+		as_hex(buf, (unsigned long)ip, 16);
+	}
+	return buf;
+}
+
 void decompressor_printk(const char *fmt, ...)
 {
 	char buf[1024] = { 0 };
@@ -38,6 +97,11 @@ void decompressor_printk(const char *fmt, ...)
 		case 's':
 			p = buf + strlcat(buf, va_arg(args, char *), sizeof(buf));
 			break;
+		case 'p':
+			if (*++fmt != 'S')
+				goto out;
+			p = buf + strlcat(buf, strsym(va_arg(args, void *)), sizeof(buf));
+			break;
 		case 'l':
 			if (*++fmt != 'x' || end - p <= max(sizeof(long) * 2, pad))
 				goto out;
@@ -67,9 +131,10 @@ void print_pgm_check_info(void)
 			    S390_lowcore.pgm_code, S390_lowcore.pgm_ilc >> 1);
 	if (kaslr_enabled)
 		decompressor_printk("Kernel random base: %lx\n", __kaslr_offset);
-	decompressor_printk("PSW : %016lx %016lx\n",
+	decompressor_printk("PSW : %016lx %016lx (%pS)\n",
 			    S390_lowcore.psw_save_area.mask,
-			    S390_lowcore.psw_save_area.addr);
+			    S390_lowcore.psw_save_area.addr,
+			    (void *)S390_lowcore.psw_save_area.addr);
 	decompressor_printk(
 		"      R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x P:%x AS:%x CC:%x PM:%x RI:%x EA:%x\n",
 		psw->per, psw->dat, psw->io, psw->ext, psw->key, psw->mcheck,