Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul…

…/slave-dma Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ...
ambv · Jul 8, 2017 · 2ceedf9 · 2ceedf9
2 parents 09b56d5 + 3edc850
commit 2ceedf9
Show file tree

Hide file tree

Showing 34 changed files with 3,026 additions and 443 deletions.
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt
@@ -3,6 +3,11 @@
 Required properties:
 - compatible: "arm,pl080", "arm,primecell";
 	      "arm,pl081", "arm,primecell";
+	      "faraday,ftdmac020", "arm,primecell"
+- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded
+  in the hardware and must be specified here as <0x0003b080>. This number
+  follows the PrimeCell standard numbering using the JEP106 vendor code 0x38
+  for Faraday Technology.
 - reg: Address range of the PL08x registers
 - interrupt: The PL08x interrupt number
 - clocks: The clock running the IP core clock
@@ -20,8 +25,8 @@ Optional properties:
 - dma-requests: contains the total number of DMA requests supported by the DMAC
 - memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
   64, 128 or 256 bytes are legal values
-- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
-  values
+- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal
+  values, the Faraday FTDMAC020 can also accept 64 bits
 
 Clients
 Required properties:

diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+	      "brcm,iproc-sba"
+	      "brcm,iproc-sba-v2"
+  The "brcm,iproc-sba" has support for only 6 PQ coefficients
+  The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+	...
+	#mbox-cells = <3>;
+	...
+};
+
+raid0 {
+	compatible = "brcm,iproc-sba-v2";
+	mboxes = <&raid_mbox 0 0x1 0xffff>,
+		 <&raid_mbox 1 0x1 0xffff>,
+		 <&raid_mbox 2 0x1 0xffff>,
+		 <&raid_mbox 3 0x1 0xffff>,
+		 <&raid_mbox 4 0x1 0xffff>,
+		 <&raid_mbox 5 0x1 0xffff>,
+		 <&raid_mbox 6 0x1 0xffff>,
+		 <&raid_mbox 7 0x1 0xffff>;
+};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -30,8 +30,9 @@ Required Properties:
 
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
-  channel number ranging from zero to the number of channels minus one.
+- interrupt-names: one entry for the error interrupt, named "error", plus one
+  entry per channel, named "ch%u", where %u is the channel number ranging from
+  zero to the number of channels minus one.
 
 - clock-names: "fck" for the functional clock
 - clocks: a list of phandle + clock-specifier pairs, one for each entry

diff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/shdma.txt
@@ -1,6 +1,6 @@
 * SHDMA Device Tree bindings
 
-Sh-/r-mobile and r-car systems often have multiple identical DMA controller
+Sh-/r-mobile and R-Car systems often have multiple identical DMA controller
 instances, capable of serving any of a common set of DMA slave devices, using
 the same configuration. To describe this topology we require all compatible
 SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible

diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
@@ -137,6 +137,9 @@ static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
 }
 
 static struct pl08x_platform_data pl08x_pd = {
+	/* Some reasonable memcpy defaults */
+	.memcpy_burst_size = PL08X_BURST_SZ_256,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
 	.slave_channels = &pl08x_slave_channels[0],
 	.num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
 	.get_xfer_signal = pl08x_get_signal,

diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
@@ -137,16 +137,10 @@ static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
 };
 
 struct pl08x_platform_data s3c64xx_dma0_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
-			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_4,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl08x_get_xfer_signal,
@@ -238,16 +232,10 @@ static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
 };
 
 struct pl08x_platform_data s3c64xx_dma1_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
-			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_4,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl08x_get_xfer_signal,

diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
@@ -44,16 +44,10 @@ struct pl022_ssp_controller pl022_plat_data = {
 
 /* dmac device registration */
 struct pl08x_platform_data pl080_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
-			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_16,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl080_get_signal,

diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
@@ -322,16 +322,10 @@ static struct pl08x_channel_data spear600_dma_info[] = {
 };
 
 static struct pl08x_platform_data spear6xx_pl080_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
-			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_16,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl080_get_signal,

diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *chan,
 	dma_addr_t dma_dest[2];
 	int src_off = 0;
 
-	if (submit->flags & ASYNC_TX_FENCE)
-		dma_flags |= DMA_PREP_FENCE;
-
 	while (src_cnt > 0) {
 		submit->flags = flags_orig;
 		pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *chan,
 			if (cb_fn_orig)
 				dma_flags |= DMA_PREP_INTERRUPT;
 		}
+		if (submit->flags & ASYNC_TX_FENCE)
+			dma_flags |= DMA_PREP_FENCE;
 
 		/* Drivers force forward progress in case they can not provide
 		 * a descriptor

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
@@ -62,8 +62,10 @@ config AMBA_PL08X
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-	  Platform has a PL08x DMAC device
-	  which can provide DMA engine support
+	  Say yes if your platform has a PL08x DMAC device which can
+	  provide DMA engine support. This includes the original ARM
+	  PL080 and PL081, Samsungs PL080 derivative and Faraday
+	  Technology's FTDMAC020 PL080 derivative.
 
 config AMCC_PPC440SPE_ADMA
 	tristate "AMCC PPC440SPe ADMA support"
@@ -99,6 +101,21 @@ config AXI_DMAC
 	  controller is often used in Analog Device's reference designs for FPGA
 	  platforms.
 
+config BCM_SBA_RAID
+	tristate "Broadcom SBA RAID engine support"
+	depends on ARM64 || COMPILE_TEST
+	depends on MAILBOX && RAID6_PQ
+	select DMA_ENGINE
+	select DMA_ENGINE_RAID
+	select ASYNC_TX_DISABLE_XOR_VAL_DMA
+	select ASYNC_TX_DISABLE_PQ_VAL_DMA
+	default ARCH_BCM_IPROC
+	help
+	  Enable support for Broadcom SBA RAID Engine. The SBA RAID
+	  engine is available on most of the Broadcom iProc SoCs. It
+	  has the capability to offload memcpy, xor and pq computation
+	  for raid5/6.
+
 config COH901318
 	bool "ST-Ericsson COH901318 DMA support"
 	select DMA_ENGINE
@@ -354,13 +371,12 @@ config MV_XOR_V2
 
 config MXS_DMA
 	bool "MXS DMA support"
-	depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q || SOC_IMX6UL
+	depends on ARCH_MXS || ARCH_MXC || COMPILE_TEST
 	select STMP_DEVICE
 	select DMA_ENGINE
 	help
 	  Support the MXS DMA engine. This engine including APBH-DMA
-	  and APBX-DMA is integrated into Freescale
-	  i.MX23/28/MX6Q/MX6DL/MX6UL chips.
+	  and APBX-DMA is integrated into some Freescale chips.
 
 config MX3_IPU
 	bool "MX3x Image Processing Unit support"

diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
 obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
+obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
 obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o