Merge tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a larger than normal update for Arm SoC specific code, most of
  it in device trees, but also drivers and the omap and at91/sama7
  platforms:

   - There are four new entries to the MAINTAINERS file: Sven Peter and
     Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
     and Vignesh Raghavendra for TI K3

   - Build fixes to address randconfig warnings in sharpsl, dove, omap1,
     and qcom platforms as well as the scmi and op-tee subsystems

   - Regression fixes for missing CONFIG_FB and other options for
     several defconfigs

   - Several bug fixes for the newly added Microchip SAMA7 platform,
     mostly regarding power management

   - Missing SMP barriers to protect accesses to SCMI virtio device

   - Regression fixes for TI OMAP, including a boot-time hang on am335x.

   - Lots of bug fixes for NXP i.MX, mostly addressing incorrect
     settings in devicetree files, and one revert for broken suspend.

   - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
     of schema warnings.

   - Regression fixes for qualcomm SoC specific drivers and devicetree
     files, reverting an mdt_loader change and at least pastially
     reverting some of the 5.15 DTS changes, plus some minor bugfixes"

* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  ARM: sharpsl_param: work around -Wstringop-overread warning
  ARM: defconfig: gemini: Restore framebuffer
  ARM: dove: mark 'putc' as inline
  ARM: omap1: move omap15xx local bus handling to usb.c
  MAINTAINERS: Add Vignesh to TI K3 platform maintainership
  arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
  ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
  arm64: dts: ls1028a: fix eSDHC2 node
  arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
  ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
  ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
  ARM: at91: pm: preload base address of controllers in tlb
  ARM: at91: pm: group constants and addresses loading
  ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
  ...

MAINTAINERS

@@ -1276,6 +1276,7 @@ F:	drivers/input/mouse/bcm5974.c
 
 APPLE DART IOMMU DRIVER
 M:	Sven Peter <[email protected]>
+R:	Alyssa Rosenzweig <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -1712,6 +1713,8 @@ F:	drivers/*/*alpine*
 
 ARM/APPLE MACHINE SUPPORT
 M:	Hector Martin <[email protected]>
+M:	Sven Peter <[email protected]>
+R:	Alyssa Rosenzweig <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 W:	https://asahilinux.org
@@ -2237,6 +2240,7 @@ F:	arch/arm/mach-pxa/mioa701.c
 
 ARM/MStar/Sigmastar Armv7 SoC support
 M:	Daniel Palmer <[email protected]>
+M:	Romain Perier <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 W:	http://linux-chenxing.org/
@@ -2713,6 +2717,7 @@ F:	drivers/power/reset/keystone-reset.c
 
 ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
 M:	Nishanth Menon <[email protected]>
+M:	Vignesh Raghavendra <[email protected]>
 M:	Tero Kristo <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Supported

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -71,7 +71,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {

arch/arm/boot/dts/at91-sama7g5ek.dts

@@ -196,11 +196,13 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
 						regulator-mode = <4>;
 					};
 
 					regulator-state-mem {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
 						regulator-mode = <4>;
 					};
 				};
@@ -353,7 +355,10 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
 	phy-mode = "rgmii-id";
 	status = "okay";
 
@@ -368,7 +373,9 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
 	phy-mode = "rmii";
 	status = "okay";
 
@@ -423,14 +430,20 @@
 			 <PIN_PA15__G0_TXEN>,
 			 <PIN_PA30__G0_RXCK>,
 			 <PIN_PA18__G0_RXDV>,
-			 <PIN_PA22__G0_MDC>,
-			 <PIN_PA23__G0_MDIO>,
 			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
 		bias-disable;
 	};
 
 	pinctrl_gmac0_txck_default: gmac0_txck_default {
 		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
 		bias-pull-up;
 	};
 
@@ -447,8 +460,13 @@
 			 <PIN_PD25__G1_RX0>,
 			 <PIN_PD26__G1_RX1>,
 			 <PIN_PD27__G1_RXER>,
-			 <PIN_PD24__G1_RXDV>,
-			 <PIN_PD28__G1_MDC>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
 			 <PIN_PD29__G1_MDIO>;
 		bias-disable;
 	};
@@ -540,13 +558,15 @@
 				 <PIN_PA8__SDMMC0_DAT5>,
 				 <PIN_PA9__SDMMC0_DAT6>,
 				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
 		ck_cd_rstn_vddsel {
 			pinmux = <PIN_PA0__SDMMC0_CK>,
 				 <PIN_PA2__SDMMC0_RSTN>,
 				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -558,6 +578,7 @@
 				 <PIN_PC0__SDMMC1_DAT1>,
 				 <PIN_PC1__SDMMC1_DAT2>,
 				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
@@ -566,6 +587,7 @@
 				 <PIN_PB28__SDMMC1_RSTN>,
 				 <PIN_PC5__SDMMC1_1V8SEL>,
 				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -577,11 +599,13 @@
 				 <PIN_PD6__SDMMC2_DAT1>,
 				 <PIN_PD7__SDMMC2_DAT2>,
 				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
 		ck {
 			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -634,6 +658,15 @@
 	pinctrl-0 = <&pinctrl_sdmmc2_default>;
 };
 
+&shdwc {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
 &spdifrx {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spdifrx_default>;

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -56,6 +56,7 @@
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -76,8 +77,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 

arch/arm/boot/dts/imx6dl-yapp4-common.dtsi

@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -277,27 +278,31 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
 		chan@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		chan@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 
 		chan@3 {
 			chan-name = "W";
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
 			reg = <3>;
+			color = <LED_COLOR_ID_WHITE>;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-pico.dtsi

@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -114,7 +114,7 @@
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
@@ -124,7 +124,7 @@
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <2>;
 	};
 };

arch/arm/boot/dts/imx6ul-14x14-evk.dtsi

@@ -292,7 +292,7 @@
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 };

arch/arm/boot/dts/omap3430-sdp.dts

@@ -101,7 +101,7 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -198,7 +198,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -1148,22 +1148,21 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "kgsl_3d0_irq";
 			clock-names =
-			    "core_clk",
-			    "iface_clk",
-			    "mem_clk",
-			    "mem_iface_clk";
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface";
 			clocks =
 			    <&mmcc GFX3D_CLK>,
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1306,7 +1305,7 @@
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
 			clock-names = "iface_clk", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
 		};