Merge tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "In terms of big picture changes this has been an extremely quiet
  release however there's a lot of changes and a fairly big diffstat
  thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks
  to his work this release removes code overall even though we've added
  a new (albiet fairly small) driver.

  Notable things:

   - A fix for a long standing issue with locking on error interrupts
     from Steve Twiss.

   - A new driver for ST Microelectonics STM32 PWR"

* tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits)
  regulator: core: simplify return value on suported_voltage
  regulator: da9xxx: Switch to SPDX identifier
  regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
  regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
  regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators
  regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc
  regulator: pv880x0: Switch to SPDX identifier
  regulator: hi6xxx: Switch to SPDX identifier
  regulator: vexpress: Switch to SPDX identifier
  regulator: vexpress: Get rid of struct vexpress_regulator
  regulator: sky81452: Switch to SPDX identifier
  regulator: sky81452: Constify sky81452_reg_ops
  regulator: sy8106a: Get rid of struct sy8106a
  regulator: core: do not report EPROBE_DEFER as error but as debug
  regulator: mt63xx: Switch to SPDX identifier
  regulator: fan53555: Switch to SPDX identifier
  regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info
  regulator: ltc3589: Switch to SPDX identifier
  regulator: ltc3589: Get rid of struct ltc3589_regulator
  regulator: ltc3589: Convert to use simplified DT parsing
  ...

Documentation/devicetree/bindings/regulator/gpio-regulator.txt

@@ -4,16 +4,30 @@ Required properties:
 - compatible		: Must be "regulator-gpio".
 - regulator-name	: Defined in regulator.txt as optional, but required
 			  here.
-- states		: Selection of available voltages and GPIO configs.
-                          if there are no states, then use a fixed regulator
+- gpios			: Array of one or more GPIO pins used to select the
+			  regulator voltage/current listed in "states".
+- states		: Selection of available voltages/currents provided by
+			  this regulator and matching GPIO configurations to
+			  achieve them. If there are no states in the "states"
+			  array, use a fixed regulator instead.
 
 Optional properties:
-- enable-gpio		: GPIO to use to enable/disable the regulator.
-- gpios			: GPIO group used to control voltage.
-- gpios-states		: gpios pin's initial states array. 0: LOW, 1: HIGH.
-			  defualt is LOW if nothing is specified.
+- enable-gpios		: GPIO used to enable/disable the regulator.
+			  Warning, the GPIO phandle flags are ignored and the
+			  GPIO polarity is controlled solely by the presence
+			  of "enable-active-high" DT property. This is due to
+			  compatibility with old DTs.
+- enable-active-high	: Polarity of "enable-gpio" GPIO is active HIGH.
+			  Default is active LOW.
+- gpios-states		: On operating systems, that don't support reading back
+			  gpio values in output mode (most notably linux), this
+			  array provides the state of GPIO pins set when
+			  requesting them from the gpio controller. Systems,
+			  that are capable of preserving state when requesting
+			  the lines, are free to ignore this property.
+			  0: LOW, 1: HIGH. Default is LOW if nothing else
+			  is specified.
 - startup-delay-us	: Startup time in microseconds.
-- enable-active-high	: Polarity of GPIO is active high (default is low).
 - regulator-type	: Specifies what is being regulated, must be either
 			  "voltage" or "current", defaults to voltage.
 
@@ -30,7 +44,7 @@ Example:
 		regulator-max-microvolt = <2600000>;
 		regulator-boot-on;
 
-		enable-gpio = <&gpio0 23 0x4>;
+		enable-gpios = <&gpio0 23 0x4>;
 		gpios = <&gpio0 24 0x4
 			 &gpio0 25 0x4>;
 		states = <1800000 0x3

Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt

@@ -0,0 +1,43 @@
+STM32MP1 PWR Regulators
+-----------------------
+
+Available Regulators in STM32MP1 PWR block are:
+  - reg11 for regulator 1V1
+  - reg18 for regulator 1V8
+  - usb33 for the swtich USB3V3
+
+Required properties:
+- compatible: Must be "st,stm32mp1,pwr-reg"
+- list of child nodes that specify the regulator reg11, reg18 or usb33
+  initialization data for defined regulators. The definition for each of
+  these nodes is defined using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+- vdd-supply: phandle to the parent supply/regulator node for vdd input
+- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33
+
+Example:
+
+pwr_regulators: pwr@50001000 {
+	compatible = "st,stm32mp1,pwr-reg";
+	reg = <0x50001000 0x10>;
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+
+	reg11: reg11 {
+		regulator-name = "reg11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+	};
+
+	reg18: reg18 {
+		regulator-name = "reg18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usb33: usb33 {
+		regulator-name = "usb33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};

drivers/mfd/wm831x-core.c

@@ -34,7 +34,7 @@
 /* Current settings - values are 2*2^(reg_val/4) microamps.  These are
  * exported since they are used by multiple drivers.
  */
-int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = {
+const unsigned int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = {
 	2,
 	2,
 	3,

drivers/mfd/wm8400-core.c

@@ -35,12 +35,6 @@ static bool wm8400_volatile(struct device *dev, unsigned int reg)
 	}
 }
 
-int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data)
-{
-	return regmap_bulk_read(wm8400->regmap, reg, data, count);
-}
-EXPORT_SYMBOL_GPL(wm8400_block_read);
-
 static int wm8400_register_codec(struct wm8400 *wm8400)
 {
 	const struct mfd_cell cell = {

drivers/regulator/88pm800.c

@@ -77,11 +77,6 @@ struct pm800_regulator_info {
 	int max_ua;
 };
 
-struct pm800_regulators {
-	struct pm80x_chip *chip;
-	struct regmap *map;
-};
-
 /*
  * vreg - the buck regs string.
  * ereg - the string for the enable register.
@@ -235,7 +230,6 @@ static int pm800_regulator_probe(struct platform_device *pdev)
 {
 	struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm80x_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
-	struct pm800_regulators *pm800_data;
 	struct regulator_config config = { };
 	struct regulator_init_data *init_data;
 	int i, ret;
@@ -252,18 +246,8 @@ static int pm800_regulator_probe(struct platform_device *pdev)
 			return -EINVAL;
 	}
 
-	pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data),
-					GFP_KERNEL);
-	if (!pm800_data)
-		return -ENOMEM;
-
-	pm800_data->map = chip->subchip->regmap_power;
-	pm800_data->chip = chip;
-
-	platform_set_drvdata(pdev, pm800_data);
-
 	config.dev = chip->dev;
-	config.regmap = pm800_data->map;
+	config.regmap = chip->subchip->regmap_power;
 	for (i = 0; i < PM800_ID_RG_MAX; i++) {
 		struct regulator_dev *regulator;
 

drivers/regulator/88pm8607.c

@@ -235,6 +235,8 @@ static const struct regulator_ops pm8606_preg_ops = {
 {									\
 	.desc	= {							\
 		.name	= "PREG",					\
+		.of_match = of_match_ptr("PREG"),			\
+		.regulators_node = of_match_ptr("regulators"),		\
 		.ops	= &pm8606_preg_ops,				\
 		.type	= REGULATOR_CURRENT,				\
 		.id	= PM8606_ID_PREG,				\
@@ -249,6 +251,8 @@ static const struct regulator_ops pm8606_preg_ops = {
 {									\
 	.desc	= {							\
 		.name	= #vreg,					\
+		.of_match = of_match_ptr(#vreg),			\
+		.regulators_node = of_match_ptr("regulators"),		\
 		.ops	= &pm8607_regulator_ops,			\
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= PM8607_ID_##vreg,				\
@@ -270,6 +274,8 @@ static const struct regulator_ops pm8606_preg_ops = {
 {									\
 	.desc	= {							\
 		.name	= "LDO" #_id,					\
+		.of_match = of_match_ptr("LDO" #_id),			\
+		.regulators_node = of_match_ptr("regulators"),		\
 		.ops	= &pm8607_regulator_ops,			\
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= PM8607_ID_LDO##_id,				\
@@ -309,36 +315,6 @@ static struct pm8607_regulator_info pm8606_regulator_info[] = {
 	PM8606_PREG(PREREGULATORB, 5),
 };
 
-#ifdef CONFIG_OF
-static int pm8607_regulator_dt_init(struct platform_device *pdev,
-				    struct pm8607_regulator_info *info,
-				    struct regulator_config *config)
-{
-	struct device_node *nproot, *np;
-	nproot = pdev->dev.parent->of_node;
-	if (!nproot)
-		return -ENODEV;
-	nproot = of_get_child_by_name(nproot, "regulators");
-	if (!nproot) {
-		dev_err(&pdev->dev, "failed to find regulators node\n");
-		return -ENODEV;
-	}
-	for_each_child_of_node(nproot, np) {
-		if (of_node_name_eq(np, info->desc.name)) {
-			config->init_data =
-				of_get_regulator_init_data(&pdev->dev, np,
-							   &info->desc);
-			config->of_node = np;
-			break;
-		}
-	}
-	of_node_put(nproot);
-	return 0;
-}
-#else
-#define pm8607_regulator_dt_init(x, y, z)	(-1)
-#endif
-
 static int pm8607_regulator_probe(struct platform_device *pdev)
 {
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -373,12 +349,11 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
 	if ((i == PM8607_ID_BUCK3) && chip->buck3_double)
 		info->slope_double = 1;
 
-	config.dev = &pdev->dev;
+	config.dev = chip->dev;
 	config.driver_data = info;
 
-	if (pm8607_regulator_dt_init(pdev, info, &config))
-		if (pdata)
-			config.init_data = pdata;
+	if (pdata)
+		config.init_data = pdata;
 
 	if (chip->id == CHIP_PM8607)
 		config.regmap = chip->regmap;

drivers/regulator/Kconfig

@@ -223,6 +223,7 @@ config REGULATOR_CPCAP
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X
+	depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
 	help
 	  Say y here to support the BUCKs and LDOs regulators found on
 	  Dialog Semiconductor DA9030/DA9034 PMIC.
@@ -839,6 +840,13 @@ config REGULATOR_STM32_VREFBUF
 	  This driver can also be built as a module. If so, the module
 	  will be called stm32-vrefbuf.
 
+config REGULATOR_STM32_PWR
+	bool "STMicroelectronics STM32 PWR"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  This driver supports internal regulators (1V1, 1V8, 3V3) in the
+	  STMicroelectronics STM32 chips.
+
 config REGULATOR_STPMIC1
 	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
 	depends on MFD_STPMIC1
@@ -1010,7 +1018,8 @@ config REGULATOR_TWL4030
 config REGULATOR_UNIPHIER
 	tristate "UniPhier regulator driver"
 	depends on ARCH_UNIPHIER || COMPILE_TEST
-	depends on OF && MFD_SYSCON
+	depends on OF
+	select REGMAP_MMIO
 	default ARCH_UNIPHIER
 	help
 	  Support for regulators implemented on Socionext UniPhier SoCs.

drivers/regulator/Makefile

@@ -105,6 +105,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
+obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
 obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
 obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o