Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/soc/soc

Pull ARM new SoC family support from Arnd Bergmann:
 "Two new SoC families are added this time.

  Sugaya Taichi submitted support for the Milbeaut SoC family from
  Socionext and explains:

    "SC2000 is a SoC of the Milbeaut series. equipped with a DSP
     optimized for computer vision. It also features advanced
     functionalities such as 360-degree, real-time spherical stitching
     with multi cameras, image stabilization for without mechanical
     gimbals, and rolling shutter correction. More detail is below:

       https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"

  Interestingly, this one has a history dating back to older chips made
  by Socionext and previously Matsushita/Panasonic based on their own
  mn10300 CPU architecture that was removed from the kernel last year.

  Manivannan Sadhasivam adds support for another SoC family, this is the
  Bitmain BM1880 chip used in the Sophon Edge TPU developer board.

  The chip is intended for Deep Learning applications, and comes with
  dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
  microcontroller core to control the tensor unit. For the moment, the
  TPU is not accessible in mainline Linux, so we treat it as a generic
  Arm SoC.

  More information is available at

       https://www.sophon.ai/"

* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
  ARM: configs: Add Milbeaut M10V defconfig
  ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
  clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
  dt-bindings: timer: Add Milbeaut M10V timer description
  ARM: milbeaut: Add basic support for Milbeaut m10v SoC
  dt-bindings: Add documentation for Milbeaut SoCs
  dt-bindings: arm: Add SMP enable-method for Milbeaut
  dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
  MAINTAINERS: Add entry for Bitmain SoC platform
  arm64: dts: bitmain: Add Sophon Egde board support
  arm64: dts: bitmain: Add BM1880 SoC support
  arm64: Add ARCH_BITMAIN platform
  dt-bindings: arm: Document Bitmain BM1880 SoC

Documentation/devicetree/bindings/arm/bitmain.yaml

@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bitmain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain platform device tree bindings
+
+maintainers:
+  - Manivannan Sadhasivam <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - bitmain,sophon-edge
+      - const: bitmain,bm1880
+...

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -228,6 +228,7 @@ patternProperties:
                 - renesas,r9a06g032-smp
                 - rockchip,rk3036-smp
                 - rockchip,rk3066-smp
+		- socionext,milbeaut-m10v-smp
                 - ste,dbx500-smp
 
       cpu-release-addr:

Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/milbeaut.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut platforms device tree bindings
+
+maintainers:
+  - Taichi Sugaya <[email protected]>
+  - Takao Orito <[email protected]>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,milbeaut-m10v-evb
+          - const: socionext,sc2000a
+...

Documentation/devicetree/bindings/sram/milbeaut-smp-sram.txt

@@ -0,0 +1,24 @@
+Milbeaut SRAM for smp bringup
+
+Milbeaut SoCs use a part of the sram for the bringup of the secondary cores.
+Once they get powered up in the bootloader, they stay at the specific part
+of the sram.
+Therefore the part needs to be added as the sub-node of mmio-sram.
+
+Required sub-node properties:
+- compatible : should be "socionext,milbeaut-smp-sram"
+
+Example:
+
+        sram: sram@0 {
+                compatible = "mmio-sram";
+                reg = <0x0 0x10000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0 0x0 0x10000>;
+
+                smp-sram@f100 {
+                        compatible = "socionext,milbeaut-smp-sram";
+                        reg = <0xf100 0x20>;
+                };
+        };

Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt

@@ -0,0 +1,17 @@
+Milbeaut SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "socionext,milbeaut-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer.
+- clocks: phandle to the input clk.
+
+Example:
+
+timer {
+	compatible = "socionext,milbeaut-timer";
+	reg = <0x1e000050 0x20>
+	interrupts = <0 91 4>;
+	clocks = <&clk 4>;
+};

MAINTAINERS

@@ -1371,6 +1371,13 @@ F:	arch/arm/mach-aspeed/
 F:	arch/arm/boot/dts/aspeed-*
 N:	aspeed
 
+ARM/BITMAIN ARCHITECTURE
+M:	Manivannan Sadhasivam <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm64/boot/dts/bitmain/
+F:	Documentation/devicetree/bindings/arm/bitmain.yaml
+
 ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Rob Herring <[email protected]>
 L:	[email protected] (moderated for non-subscribers)

arch/arm/Kconfig

@@ -751,6 +751,8 @@ source "arch/arm/mach-mediatek/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
 
+source "arch/arm/mach-milbeaut/Kconfig"
+
 source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"

arch/arm/Makefile

@@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
+machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik

arch/arm/boot/dts/Makefile

@@ -1246,6 +1246,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7623n-bananapi-bpi-r2.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \

arch/arm/boot/dts/milbeaut-m10v-evb.dts

@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Socionext Milbeaut M10V Evaluation Board */
+/dts-v1/;
+#include "milbeaut-m10v.dtsi"
+
+/ {
+	model = "Socionext M10V EVB";
+	compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "rootwait earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		uclk40xi: uclk40xi {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <40000000>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000  0x80000000>;
+	};
+
+};

arch/arm/boot/dts/milbeaut-m10v.dtsi

@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "socionext,sc2000a";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,milbeaut-m10v-smp";
+		cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+		};
+		cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+		};
+		cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+		};
+		cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+		};
+	};
+
+	timer { /* The Generic Timer */
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <40000000>;
+		always-on;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&gic>;
+
+		gic: interrupt-controller@1d000000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1d001000 0x1000>,
+			      <0x1d002000 0x1000>; /* CPU I/f base and size */
+		};
+
+		timer@1e000050 { /* 32-bit Reload Timers */
+			compatible = "socionext,milbeaut-timer";
+			reg = <0x1e000050 0x20>;
+			interrupts = <0 91 4>;
+		};
+
+		uart1: serial@1e700010 { /* PE4, PE5 */
+			/* Enable this as ttyUSI0 */
+			compatible = "socionext,milbeaut-usio-uart";
+			reg = <0x1e700010 0x10>;
+			interrupts = <0 141 0x4>, <0 149 0x4>;
+			interrupt-names = "rx", "tx";
+		};
+
+	};
+
+	sram@0 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x10000>;
+		smp-sram@f100 {
+			compatible = "socionext,milbeaut-smp-sram";
+			reg = <0xf100 0x20>;
+		};
+	};
+};

arch/arm/configs/milbeaut_m10v_defconfig

@@ -0,0 +1,119 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_ARCH_MILBEAUT=y
+CONFIG_ARCH_MILBEAUT_M10V=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_VDSO is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=16
+CONFIG_THUMB2_KERNEL=y
+# CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
+# CONFIG_ARM_PATCH_IDIV is not set
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+CONFIG_KEXEC=y
+CONFIG_EFI=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_QORIQ_CPUFREQ=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_EFI_VARS=m
+CONFIG_EFI_CAPSULE_LOADER=m
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA1_ARM_CE=m
+CONFIG_CRYPTO_SHA2_ARM_CE=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_CRC32_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_OF_OVERLAY=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_MATRIXKMAP=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_DEV_BUS=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_HWMON is not set
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_SYNC_FILE=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_SOC_BRCMSTB=y
+CONFIG_MEMORY=y
+# CONFIG_ARM_PMU is not set
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_KEYS=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SEQIV=m
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y

arch/arm/configs/multi_v7_defconfig

@@ -54,6 +54,8 @@ CONFIG_SOC_VF610=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MEDIATEK=y
 CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MILBEAUT=y
+CONFIG_ARCH_MILBEAUT_M10V=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y