Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: remove pointless NULL test
  pata_hpt3x2n: fix clock turnaround
  libata: fix reporting of drained bytes when clearing DRQ
  sata_mv: add power management support for the PCI controllers.
  sata_mv: store the board_idx into the host private data
  pata_octeon_cf: use resource_size(), to fix resource sizing bug
  libata: use the WRITE_SAME_16 define
  sata_mv: move the PCI bar description initialization code
  sata_mv: add power management support for the platform driver
  sata_mv: support clkdev framework
  sata_mv: increase PIO IORDY timeout

Fixed crazy mode-change in merge.

drivers/ata/libata-scsi.c

@@ -3022,7 +3022,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
 	case WRITE_16:
 		return ata_scsi_rw_xlat;
 
-	case 0x93 /*WRITE_SAME_16*/:
+	case WRITE_SAME_16:
 		return ata_scsi_write_same_xlat;
 
 	case SYNCHRONIZE_CACHE:

drivers/ata/libata-sff.c

@@ -2275,7 +2275,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
 	ap = qc->ap;
 	/* Drain up to 64K of data before we give up this recovery method */
 	for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
-						&& count < 32768; count++)
+						&& count < 65536; count += 2)
 		ioread16(ap->ioaddr.data_addr);
 
 	/* Can become DEBUG later */

drivers/ata/pata_hpt3x2n.c

@@ -8,7 +8,7 @@
  * Copyright (C) 1999-2003		Andre Hedrick <[email protected]>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
- * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009	MontaVista Software, Inc.
  *
  *
  * TODO
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.7"
+#define DRV_VERSION	"0.3.8"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -264,7 +264,7 @@ static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc)
 
 static void hpt3x2n_set_clock(struct ata_port *ap, int source)
 {
-	void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+	void __iomem *bmdma = ap->ioaddr.bmdma_addr - ap->port_no * 8;
 
 	/* Tristate the bus */
 	iowrite8(0x80, bmdma+0x73);
@@ -274,9 +274,9 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source)
 	iowrite8(source, bmdma+0x7B);
 	iowrite8(0xC0, bmdma+0x79);
 
-	/* Reset state machines */
-	iowrite8(0x37, bmdma+0x70);
-	iowrite8(0x37, bmdma+0x74);
+	/* Reset state machines, avoid enabling the disabled channels */
+	iowrite8(ioread8(bmdma+0x70) | 0x32, bmdma+0x70);
+	iowrite8(ioread8(bmdma+0x74) | 0x32, bmdma+0x74);
 
 	/* Complete reset */
 	iowrite8(0x00, bmdma+0x79);
@@ -286,21 +286,10 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source)
 	iowrite8(0x00, bmdma+0x77);
 }
 
-/* Check if our partner interface is busy */
-
-static int hpt3x2n_pair_idle(struct ata_port *ap)
-{
-	struct ata_host *host = ap->host;
-	struct ata_port *pair = host->ports[ap->port_no ^ 1];
-
-	if (pair->hsm_task_state == HSM_ST_IDLE)
-		return 1;
-	return 0;
-}
-
 static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
 {
 	long flags = (long)ap->host->private_data;
+
 	/* See if we should use the DPLL */
 	if (writing)
 		return USE_DPLL;	/* Needed for write */
@@ -309,20 +298,35 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
 	return 0;
 }
 
+static int hpt3x2n_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_port *alt = ap->host->ports[ap->port_no ^ 1];
+	int rc, flags = (long)ap->host->private_data;
+	int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE);
+
+	/* First apply the usual rules */
+	rc = ata_std_qc_defer(qc);
+	if (rc != 0)
+		return rc;
+
+	if ((flags & USE_DPLL) != dpll && alt->qc_active)
+		return ATA_DEFER_PORT;
+	return 0;
+}
+
 static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
 {
-	struct ata_taskfile *tf = &qc->tf;
 	struct ata_port *ap = qc->ap;
 	int flags = (long)ap->host->private_data;
+	int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE);
 
-	if (hpt3x2n_pair_idle(ap)) {
-		int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE));
-		if ((flags & USE_DPLL) != dpll) {
-			if (dpll == 1)
-				hpt3x2n_set_clock(ap, 0x21);
-			else
-				hpt3x2n_set_clock(ap, 0x23);
-		}
+	if ((flags & USE_DPLL) != dpll) {
+		flags &= ~USE_DPLL;
+		flags |= dpll;
+		ap->host->private_data = (void *)(long)flags;
+
+		hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23);
 	}
 	return ata_sff_qc_issue(qc);
 }
@@ -339,6 +343,8 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
 	.bmdma_stop	= hpt3x2n_bmdma_stop,
+
+	.qc_defer	= hpt3x2n_qc_defer,
 	.qc_issue	= hpt3x2n_qc_issue,
 
 	.cable_detect	= hpt3x2n_cable_detect,
@@ -454,7 +460,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	unsigned int f_low, f_high;
 	int adjust;
 	unsigned long iobase = pci_resource_start(dev, 4);
-	void *hpriv = NULL;
+	void *hpriv = (void *)USE_DPLL;
 	int rc;
 
 	rc = pcim_enable_device(dev);
@@ -539,7 +545,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Set our private data up. We only need a few flags so we use
 	   it directly */
 	if (pci_mhz > 60) {
-		hpriv = (void *)PCI66;
+		hpriv = (void *)(PCI66 | USE_DPLL);
 		/*
 		 * On  HPT371N, if ATA clock is 66 MHz we must set bit 2 in
 		 * the MISC. register to stretch the UltraDMA Tss timing.

drivers/ata/pata_octeon_cf.c

@@ -853,7 +853,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
 			return -EINVAL;
 
 		cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start,
-					   res_cs0->end - res_cs1->start + 1);
+					   resource_size(res_cs1));
 
 		if (!cs1)
 			return -ENOMEM;