selftests/powerpc: entry flush test

Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.

For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.

Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

tools/testing/selftests/powerpc/security/.gitignore

@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 rfi_flush
+entry_flush

tools/testing/selftests/powerpc/security/Makefile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-TEST_GEN_PROGS := rfi_flush spectre_v2
+TEST_GEN_PROGS := rfi_flush entry_flush spectre_v2
 top_srcdir = ../../../../..
 
 CFLAGS += -I../../../../../usr/include

tools/testing/selftests/powerpc/security/entry_flush.c

@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2018 IBM Corporation.
+ */
+
+#define __SANE_USERSPACE_TYPES__
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <malloc.h>
+#include <unistd.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include "utils.h"
+
+#define CACHELINE_SIZE 128
+
+struct perf_event_read {
+	__u64 nr;
+	__u64 l1d_misses;
+};
+
+static inline __u64 load(void *addr)
+{
+	__u64 tmp;
+
+	asm volatile("ld %0,0(%1)" : "=r"(tmp) : "b"(addr));
+
+	return tmp;
+}
+
+static void syscall_loop(char *p, unsigned long iterations,
+			 unsigned long zero_size)
+{
+	for (unsigned long i = 0; i < iterations; i++) {
+		for (unsigned long j = 0; j < zero_size; j += CACHELINE_SIZE)
+			load(p + j);
+		getppid();
+	}
+}
+
+static void sigill_handler(int signr, siginfo_t *info, void *unused)
+{
+	static int warned;
+	ucontext_t *ctx = (ucontext_t *)unused;
+	unsigned long *pc = &UCONTEXT_NIA(ctx);
+
+	/* mtspr 3,RS to check for move to DSCR below */
+	if ((*((unsigned int *)*pc) & 0xfc1fffff) == 0x7c0303a6) {
+		if (!warned++)
+			printf("WARNING: Skipping over dscr setup. Consider running 'ppc64_cpu --dscr=1' manually.\n");
+		*pc += 4;
+	} else {
+		printf("SIGILL at %p\n", pc);
+		abort();
+	}
+}
+
+static void set_dscr(unsigned long val)
+{
+	static int init;
+	struct sigaction sa;
+
+	if (!init) {
+		memset(&sa, 0, sizeof(sa));
+		sa.sa_sigaction = sigill_handler;
+		sa.sa_flags = SA_SIGINFO;
+		if (sigaction(SIGILL, &sa, NULL))
+			perror("sigill_handler");
+		init = 1;
+	}
+
+	asm volatile("mtspr %1,%0" : : "r" (val), "i" (SPRN_DSCR));
+}
+
+int entry_flush_test(void)
+{
+	char *p;
+	int repetitions = 10;
+	int fd, passes = 0, iter, rc = 0;
+	struct perf_event_read v;
+	__u64 l1d_misses_total = 0;
+	unsigned long iterations = 100000, zero_size = 24 * 1024;
+	unsigned long l1d_misses_expected;
+	int rfi_flush_orig;
+	int entry_flush, entry_flush_orig;
+
+	SKIP_IF(geteuid() != 0);
+
+	// The PMU event we use only works on Power7 or later
+	SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06));
+
+	if (read_debugfs_file("powerpc/rfi_flush", &rfi_flush_orig) < 0) {
+		perror("Unable to read powerpc/rfi_flush debugfs file");
+		SKIP_IF(1);
+	}
+
+	if (read_debugfs_file("powerpc/entry_flush", &entry_flush_orig) < 0) {
+		perror("Unable to read powerpc/entry_flush debugfs file");
+		SKIP_IF(1);
+	}
+
+	if (rfi_flush_orig != 0) {
+		if (write_debugfs_file("powerpc/rfi_flush", 0) < 0) {
+			perror("error writing to powerpc/rfi_flush debugfs file");
+			FAIL_IF(1);
+		}
+	}
+
+	entry_flush = entry_flush_orig;
+
+	fd = perf_event_open_counter(PERF_TYPE_RAW, /* L1d miss */ 0x400f0, -1);
+	FAIL_IF(fd < 0);
+
+	p = (char *)memalign(zero_size, CACHELINE_SIZE);
+
+	FAIL_IF(perf_event_enable(fd));
+
+	// disable L1 prefetching
+	set_dscr(1);
+
+	iter = repetitions;
+
+	/*
+	 * We expect to see l1d miss for each cacheline access when entry_flush
+	 * is set. Allow a small variation on this.
+	 */
+	l1d_misses_expected = iterations * (zero_size / CACHELINE_SIZE - 2);
+
+again:
+	FAIL_IF(perf_event_reset(fd));
+
+	syscall_loop(p, iterations, zero_size);
+
+	FAIL_IF(read(fd, &v, sizeof(v)) != sizeof(v));
+
+	if (entry_flush && v.l1d_misses >= l1d_misses_expected)
+		passes++;
+	else if (!entry_flush && v.l1d_misses < (l1d_misses_expected / 2))
+		passes++;
+
+	l1d_misses_total += v.l1d_misses;
+
+	while (--iter)
+		goto again;
+
+	if (passes < repetitions) {
+		printf("FAIL (L1D misses with entry_flush=%d: %llu %c %lu) [%d/%d failures]\n",
+		       entry_flush, l1d_misses_total, entry_flush ? '<' : '>',
+		       entry_flush ? repetitions * l1d_misses_expected :
+		       repetitions * l1d_misses_expected / 2,
+		       repetitions - passes, repetitions);
+		rc = 1;
+	} else {
+		printf("PASS (L1D misses with entry_flush=%d: %llu %c %lu) [%d/%d pass]\n",
+		       entry_flush, l1d_misses_total, entry_flush ? '>' : '<',
+		       entry_flush ? repetitions * l1d_misses_expected :
+		       repetitions * l1d_misses_expected / 2,
+		       passes, repetitions);
+	}
+
+	if (entry_flush == entry_flush_orig) {
+		entry_flush = !entry_flush_orig;
+		if (write_debugfs_file("powerpc/entry_flush", entry_flush) < 0) {
+			perror("error writing to powerpc/entry_flush debugfs file");
+			return 1;
+		}
+		iter = repetitions;
+		l1d_misses_total = 0;
+		passes = 0;
+		goto again;
+	}
+
+	perf_event_disable(fd);
+	close(fd);
+
+	set_dscr(0);
+
+	if (write_debugfs_file("powerpc/rfi_flush", rfi_flush_orig) < 0) {
+		perror("unable to restore original value of powerpc/rfi_flush debugfs file");
+		return 1;
+	}
+
+	if (write_debugfs_file("powerpc/entry_flush", entry_flush_orig) < 0) {
+		perror("unable to restore original value of powerpc/entry_flush debugfs file");
+		return 1;
+	}
+
+	return rc;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(entry_flush_test, "entry_flush_test");
+}