powerpc: remove PReP platform

PPC_PREP is marked as BROKEN since v2.6.15. Remove all PReP specific code now. Signed-off-by: Paul Bolle <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
ambv · Apr 18, 2013 · 933ee71 · 933ee71
1 parent 9850bae
commit 933ee71
Show file tree

Hide file tree

Showing 12 changed files with 19 additions and 242 deletions.
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
@@ -14,10 +14,6 @@ hvcs.txt
 	- IBM "Hypervisor Virtual Console Server" Installation Guide
 mpc52xx.txt
 	- Linux 2.6.x on MPC52xx family
-sound.txt
-	- info on sound support under Linux/PPC
-zImage_layout.txt
-	- info on the kernel images for Linux/PPC
 qe_firmware.txt
 	- describes the layout of firmware binaries for the Freescale QUICC
 	  Engine and the code that parses and uploads the microcode therein.
diff --git a/Documentation/powerpc/sound.txt b/Documentation/powerpc/sound.txt
diff --git a/Documentation/powerpc/zImage_layout.txt b/Documentation/powerpc/zImage_layout.txt
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
@@ -647,14 +647,14 @@ menu "Bus options"
 
 config ISA
 	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP || PPC_CHRP
+	depends on PPC_CHRP
 	select PPC_I8259
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
 	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
+	  have an IBM RS/6000 or pSeries machine, say Y.  If you have an
+	  embedded board, consult your board documentation.
 
 config ZONE_DMA
 	bool
@@ -968,7 +968,7 @@ config TASK_SIZE_BOOL
 
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000" if PPC_PREP || PPC_8xx
+	default "0x80000000" if PPC_8xx
 	default "0xc0000000"
 
 config CONSISTENT_SIZE_BOOL

diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h
@@ -16,10 +16,6 @@
  *
  * None of this really applies for Power Macintoshes.  There is
  * basically just enough here to get kernel/dma.c to compile.
- *
- * There may be some comments or restrictions made here which are
- * not valid for the PReP platform.  Take what you read
- * with a grain of salt.
  */
 
 #include <asm/io.h>
@@ -57,7 +53,6 @@
  *  - page registers for 5-7 don't use data bit 0, represent 128K pages
  *  - page registers for 0-3 use bit 0, represent 64K pages
  *
- * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
  * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
  * Note that addresses loaded into registers must be _physical_ addresses,
  * not logical addresses (which may differ if paging is active).

diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
@@ -15,10 +15,6 @@
 extern int check_legacy_ioport(unsigned long base_port);
 #define I8042_DATA_REG	0x60
 #define FDC_BASE	0x3f0
-/* only relevant for PReP */
-#define _PIDXR		0x279
-#define _PNPWRP		0xa79
-#define PNPBIOS_BASE	0xf000
 
 #if defined(CONFIG_PPC64) && defined(CONFIG_PCI)
 extern struct pci_dev *isa_bridge_pcidev;

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
@@ -40,7 +40,7 @@
  * -- BenH.
  */
 
-/* PREP sub-platform types see residual.h for these */
+/* PREP sub-platform types. Unused */
 #define _PREP_Motorola	0x01	/* motorola prep */
 #define _PREP_Firm	0x02	/* firmworks prep */
 #define _PREP_IBM	0x00	/* ibm prep */
@@ -56,13 +56,6 @@
 
 extern int _chrp_type;
 
-#ifdef CONFIG_PPC_PREP
-
-/* what kind of prep workstation we are */
-extern int _prep_type;
-
-#endif /* CONFIG_PPC_PREP */
-
 #endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
 
 /*

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
@@ -621,12 +621,6 @@ int check_legacy_ioport(unsigned long base_port)
 	case FDC_BASE: /* FDC1 */
 		np = of_find_node_by_type(NULL, "fdc");
 		break;
-#ifdef CONFIG_PPC_PREP
-	case _PIDXR:
-	case _PNPWRP:
-	case PNPBIOS_BASE:
-		/* implement me */
-#endif
 	default:
 		/* ipmi is supposed to fail here */
 		break;

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
@@ -6,7 +6,6 @@ source "arch/powerpc/platforms/chrp/Kconfig"
 source "arch/powerpc/platforms/512x/Kconfig"
 source "arch/powerpc/platforms/52xx/Kconfig"
 source "arch/powerpc/platforms/powermac/Kconfig"
-source "arch/powerpc/platforms/prep/Kconfig"
 source "arch/powerpc/platforms/maple/Kconfig"
 source "arch/powerpc/platforms/pasemi/Kconfig"
 source "arch/powerpc/platforms/ps3/Kconfig"
@@ -233,7 +232,7 @@ endmenu
 
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && (PPC_PREP || PPC_PMAC)
+	depends on 6xx && PPC_PMAC
 	help
 	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
 	  mean that extra synchronization instructions are required near

diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
@@ -513,10 +513,6 @@ static int __init pnpbios_init(void)
 {
 	int ret;
 
-#if defined(CONFIG_PPC)
-	if (check_legacy_ioport(PNPBIOS_BASE))
-		return -ENODEV;
-#endif
 	if (pnpbios_disabled || dmi_check_system(pnpbios_dmi_table) ||
 	    paravirt_enabled()) {
 		printk(KERN_INFO "PnPBIOS: Disabled\n");
@@ -570,10 +566,7 @@ fs_initcall(pnpbios_init);
 static int __init pnpbios_thread_init(void)
 {
 	struct task_struct *task;
-#if defined(CONFIG_PPC)
-	if (check_legacy_ioport(PNPBIOS_BASE))
-		return 0;
-#endif
+
 	if (pnpbios_disabled)
 		return 0;
 

diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
@@ -53,12 +53,6 @@
 #ifdef CONFIG_AMIGA
 #include <asm/amigahw.h>
 #endif
-#ifdef CONFIG_PPC_PREP
-#include <asm/machdep.h>
-#define isPReP machine_is(prep)
-#else
-#define isPReP 0
-#endif
 
 #include <video/vga.h>
 #include <video/cirrus.h>
@@ -557,30 +551,18 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 		break;
 
 	case 16:
-		if (isPReP) {
-			var->red.offset = 2;
-			var->green.offset = -3;
-			var->blue.offset = 8;
-		} else {
-			var->red.offset = 11;
-			var->green.offset = 5;
-			var->blue.offset = 0;
-		}
+		var->red.offset = 11;
+		var->green.offset = 5;
+		var->blue.offset = 0;
 		var->red.length = 5;
 		var->green.length = 6;
 		var->blue.length = 5;
 		break;
 
 	case 24:
-		if (isPReP) {
-			var->red.offset = 0;
-			var->green.offset = 8;
-			var->blue.offset = 16;
-		} else {
-			var->red.offset = 16;
-			var->green.offset = 8;
-			var->blue.offset = 0;
-		}
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
 		var->red.length = 8;
 		var->green.length = 8;
 		var->blue.length = 8;
@@ -1874,17 +1856,6 @@ static void cirrusfb_imageblit(struct fb_info *info,
 	}
 }
 
-#ifdef CONFIG_PPC_PREP
-#define PREP_VIDEO_BASE ((volatile unsigned long) 0xC0000000)
-#define PREP_IO_BASE    ((volatile unsigned char *) 0x80000000)
-static void get_prep_addrs(unsigned long *display, unsigned long *registers)
-{
-	*display = PREP_VIDEO_BASE;
-	*registers = (unsigned long) PREP_IO_BASE;
-}
-
-#endif				/* CONFIG_PPC_PREP */
-
 #ifdef CONFIG_PCI
 static int release_io_ports;
 
@@ -2139,21 +2110,12 @@ static int cirrusfb_pci_register(struct pci_dev *pdev,
 	dev_dbg(info->device, " base address 1 is 0x%Lx\n",
 		(unsigned long long)pdev->resource[1].start);
 
-	if (isPReP) {
-		pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, 0x00000000);
-#ifdef CONFIG_PPC_PREP
-		get_prep_addrs(&board_addr, &info->fix.mmio_start);
-#endif
-	/* PReP dies if we ioremap the IO registers, but it works w/out... */
-		cinfo->regbase = (char __iomem *) info->fix.mmio_start;
-	} else {
-		dev_dbg(info->device,
-			"Attempt to get PCI info for Cirrus Graphics Card\n");
-		get_pci_addrs(pdev, &board_addr, &info->fix.mmio_start);
-		/* FIXME: this forces VGA.  alternatives? */
-		cinfo->regbase = NULL;
-		cinfo->laguna_mmio = ioremap(info->fix.mmio_start, 0x1000);
-	}
+	dev_dbg(info->device,
+		"Attempt to get PCI info for Cirrus Graphics Card\n");
+	get_pci_addrs(pdev, &board_addr, &info->fix.mmio_start);
+	/* FIXME: this forces VGA.  alternatives? */
+	cinfo->regbase = NULL;
+	cinfo->laguna_mmio = ioremap(info->fix.mmio_start, 0x1000);
 
 	dev_dbg(info->device, "Board address: 0x%lx, register address: 0x%lx\n",
 		board_addr, info->fix.mmio_start);