Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The interrupt subsystem delivers this time:

   - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support

   - Initial GIC-V4 support

   - Consolidation of the FSL MSI support

   - Utilize the effective affinity interface in various ARM irqchip
     drivers

   - Yet another interrupt chip driver (UniPhier AIDET)

   - Bulk conversion of the irq chip driver to use %pOF

   - The usual small fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  irqchip/ls-scfg-msi: Add MSI affinity support
  irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
  irqchip/ls-scfg-msi: Add LS1046a MSI support
  arm64: dts: ls1046a: Add MSI dts node
  arm64: dts: ls1043a: Share all MSIs
  arm: dts: ls1021a: Share all MSIs
  arm64: dts: ls1043a: Fix typo of MSI compatible string
  arm: dts: ls1021a: Fix typo of MSI compatible string
  irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
  irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
  irqchip/mmp: Make mmp_intc_conf const
  irqchip/gic: Make irq_chip const
  irqchip/gic-v3: Advertise GICv4 support to KVM
  irqchip/gic-v4: Enable low-level GICv4 operations
  irqchip/gic-v4: Add some basic documentation
  irqchip/gic-v4: Add VLPI configuration interface
  irqchip/gic-v4: Add VPE command interface
  irqchip/gic-v4: Add per-VM VPE domain creation
  irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
  irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
  ...

Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt

@@ -4,8 +4,10 @@ Required properties:
 
 - compatible: should be "fsl,<soc-name>-msi" to identify
 	      Layerscape PCIe MSI controller block such as:
-              "fsl,1s1021a-msi"
-              "fsl,1s1043a-msi"
+              "fsl,ls1021a-msi"
+              "fsl,ls1043a-msi"
+              "fsl,ls1046a-msi"
+              "fsl,ls1043a-v1.1-msi"
 - msi-controller: indicates that this is a PCIe MSI controller node
 - reg: physical base address of the controller and length of memory mapped.
 - interrupts: an interrupt to the parent interrupt controller.
@@ -23,7 +25,7 @@ MSI controller node
 Examples:
 
 	msi1: msi-controller@1571000 {
-		compatible = "fsl,1s1043a-msi";
+		compatible = "fsl,ls1043a-msi";
 		reg = <0x0 0x1571000 0x0 0x8>,
 		msi-controller;
 		interrupts = <0 116 0x4>;

Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt

@@ -0,0 +1,32 @@
+UniPhier AIDET
+
+UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic
+Interrupt Controller).  GIC itself can handle only high level and rising edge
+interrupts.  The AIDET provides logic inverter to support low level and falling
+edge interrupts.
+
+Required properties:
+- compatible: Should be one of the following:
+    "socionext,uniphier-ld4-aidet"  - for LD4 SoC
+    "socionext,uniphier-pro4-aidet" - for Pro4 SoC
+    "socionext,uniphier-sld8-aidet" - for sLD8 SoC
+    "socionext,uniphier-pro5-aidet" - for Pro5 SoC
+    "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-aidet" - for LD11 SoC
+    "socionext,uniphier-ld20-aidet" - for LD20 SoC
+    "socionext,uniphier-pxs3-aidet" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an interrupt
+  source.  The value should be 2.  The first cell defines the interrupt number
+  (corresponds to the SPI interrupt number of GIC).  The second cell specifies
+  the trigger type as defined in interrupts.txt in this directory.
+
+Example:
+
+	aidet: aidet@5fc20000 {
+		compatible = "socionext,uniphier-pro4-aidet";
+		reg = <0x5fc20000 0x200>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};

Documentation/driver-model/devres.txt

@@ -312,6 +312,7 @@ IRQ
   devm_irq_alloc_descs_from()
   devm_irq_alloc_generic_chip()
   devm_irq_setup_generic_chip()
+  devm_irq_sim_init()
 
 LED
   devm_led_classdev_register()

MAINTAINERS

@@ -1993,6 +1993,7 @@ F:	arch/arm64/boot/dts/socionext/
 F:	drivers/bus/uniphier-system-bus.c
 F:	drivers/clk/uniphier/
 F:	drivers/i2c/busses/i2c-uniphier*
+F:	drivers/irqchip/irq-uniphier-aidet.c
 F:	drivers/pinctrl/uniphier/
 F:	drivers/reset/reset-uniphier.c
 F:	drivers/tty/serial/8250/8250_uniphier.c

arch/arm/boot/dts/ls1021a.dtsi

@@ -129,14 +129,14 @@
 		};
 
 		msi1: msi-controller@1570e00 {
-			compatible = "fsl,1s1021a-msi";
+			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
 			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
-			compatible = "fsl,1s1021a-msi";
+			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e08 0x0 0x8>;
 			msi-controller;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
@@ -699,7 +699,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi1>;
+			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
@@ -722,7 +722,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi2>;
+			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,

arch/arm/include/asm/arch_gicv3.h

@@ -275,6 +275,12 @@ static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr)
 #define gicr_read_pendbaser(c)		__gic_readq_nonatomic(c)
 #define gicr_write_pendbaser(v, c)	__gic_writeq_nonatomic(v, c)
 
+/*
+ * GICR_xLPIR - only the lower bits are significant
+ */
+#define gic_read_lpir(c)		readl_relaxed(c)
+#define gic_write_lpir(v, c)		writel_relaxed(lower_32_bits(v), c)
+
 /*
  * GITS_TYPER is an ID register and doesn't need atomicity.
  */
@@ -291,5 +297,33 @@ static inline u64 __gic_readq_nonatomic(const volatile void __iomem *addr)
  */
 #define gits_write_cwriter(v, c)	__gic_writeq_nonatomic(v, c)
 
+/*
+ * GITS_VPROPBASER - hi and lo bits may be accessed independently.
+ */
+#define gits_write_vpropbaser(v, c)	__gic_writeq_nonatomic(v, c)
+
+/*
+ * GITS_VPENDBASER - the Valid bit must be cleared before changing
+ * anything else.
+ */
+static inline void gits_write_vpendbaser(u64 val, void * __iomem addr)
+{
+	u32 tmp;
+
+	tmp = readl_relaxed(addr + 4);
+	if (tmp & (GICR_VPENDBASER_Valid >> 32)) {
+		tmp &= ~(GICR_VPENDBASER_Valid >> 32);
+		writel_relaxed(tmp, addr + 4);
+	}
+
+	/*
+	 * Use the fact that __gic_writeq_nonatomic writes the second
+	 * half of the 64bit quantity after the first.
+	 */
+	__gic_writeq_nonatomic(val, addr);
+}
+
+#define gits_read_vpendbaser(c)		__gic_readq_nonatomic(c)
+
 #endif /* !__ASSEMBLY__ */
 #endif /* !__ASM_ARCH_GICV3_H */

arch/arm/mach-hisi/Kconfig

@@ -39,6 +39,7 @@ config ARCH_HIP04
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
 	select MCPM_QUAD_CLUSTER if SMP
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 	help
 	  Support for Hisilicon HiP04 SoC family
 

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -653,21 +653,21 @@
 		};
 
 		msi1: msi-controller1@1571000 {
-			compatible = "fsl,1s1043a-msi";
+			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1571000 0x0 0x8>;
 			msi-controller;
 			interrupts = <0 116 0x4>;
 		};
 
 		msi2: msi-controller2@1572000 {
-			compatible = "fsl,1s1043a-msi";
+			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
 			interrupts = <0 126 0x4>;
 		};
 
 		msi3: msi-controller3@1573000 {
-			compatible = "fsl,1s1043a-msi";
+			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1573000 0x0 0x8>;
 			msi-controller;
 			interrupts = <0 160 0x4>;
@@ -689,7 +689,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi1>;
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
@@ -714,7 +714,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi2>;
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
@@ -739,7 +739,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi3>;
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -630,6 +630,37 @@
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
 		};
+
+		msi1: msi-controller@1580000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1590000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1590000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi3: msi-controller@15a0000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x15a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 	};
 
 	reserved-memory {

arch/arm64/include/asm/arch_gicv3.h

@@ -116,6 +116,8 @@ static inline void gic_write_bpr1(u32 val)
 
 #define gic_read_typer(c)		readq_relaxed(c)
 #define gic_write_irouter(v, c)		writeq_relaxed(v, c)
+#define gic_read_lpir(c)		readq_relaxed(c)
+#define gic_write_lpir(v, c)		writeq_relaxed(v, c)
 
 #define gic_flush_dcache_to_poc(a,l)	__flush_dcache_area((a), (l))
 
@@ -133,5 +135,10 @@ static inline void gic_write_bpr1(u32 val)
 #define gicr_write_pendbaser(v, c)	writeq_relaxed(v, c)
 #define gicr_read_pendbaser(c)		readq_relaxed(c)
 
+#define gits_write_vpropbaser(v, c)	writeq_relaxed(v, c)
+
+#define gits_write_vpendbaser(v, c)	writeq_relaxed(v, c)
+#define gits_read_vpendbaser(c)		readq_relaxed(c)
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_ARCH_GICV3_H */

arch/metag/Kconfig

@@ -26,6 +26,7 @@ config METAG
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UNDERSCORE_SYMBOL_PREFIX
 	select IRQ_DOMAIN
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE

drivers/irqchip/Kconfig

@@ -7,6 +7,7 @@ config ARM_GIC
 	select IRQ_DOMAIN
 	select IRQ_DOMAIN_HIERARCHY
 	select MULTI_IRQ_HANDLER
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config ARM_GIC_PM
 	bool
@@ -34,6 +35,7 @@ config ARM_GIC_V3
 	select MULTI_IRQ_HANDLER
 	select IRQ_DOMAIN_HIERARCHY
 	select PARTITION_PERCPU
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config ARM_GIC_V3_ITS
 	bool
@@ -64,6 +66,7 @@ config ARMADA_370_XP_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
 	select PCI_MSI if PCI
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config ALPINE_MSI
 	bool
@@ -93,11 +96,13 @@ config BCM6345_L1_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config BCM7038_L1_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config BCM7120_L2_IRQ
 	bool
@@ -136,6 +141,7 @@ config IRQ_MIPS_CPU
 	select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
 	select IRQ_DOMAIN
 	select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config CLPS711X_IRQCHIP
 	bool
@@ -217,6 +223,7 @@ config VERSATILE_FPGA_IRQ_NR
 config XTENSA_MX
 	bool
 	select IRQ_DOMAIN
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config XILINX_INTC
 	bool
@@ -306,3 +313,11 @@ config QCOM_IRQ_COMBINER
 	help
 	  Say yes here to add support for the IRQ combiner devices embedded
 	  in Qualcomm Technologies chips.
+
+config IRQ_UNIPHIER_AIDET
+	bool "UniPhier AIDET support" if COMPILE_TEST
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	default ARCH_UNIPHIER
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Support for the UniPhier AIDET (ARM Interrupt Detector).

drivers/irqchip/Makefile

@@ -28,7 +28,7 @@ obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
 obj-$(CONFIG_ARCH_REALVIEW)		+= irq-gic-realview.o
 obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
 obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
-obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o
+obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o irq-gic-v4.o
 obj-$(CONFIG_PARTITION_PERCPU)		+= irq-partition-percpu.o
 obj-$(CONFIG_HISILICON_IRQ_MBIGEN)	+= irq-mbigen.o
 obj-$(CONFIG_ARM_NVIC)			+= irq-nvic.o
@@ -78,3 +78,4 @@ obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
+obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o

drivers/irqchip/irq-armada-370-xp.c

@@ -203,7 +203,7 @@ static struct irq_chip armada_370_xp_msi_irq_chip = {
 
 static struct msi_domain_info armada_370_xp_msi_domain_info = {
 	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		   MSI_FLAG_MULTI_PCI_MSI),
+		   MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX),
 	.chip	= &armada_370_xp_msi_irq_chip,
 };
 
@@ -330,6 +330,8 @@ static int armada_xp_set_affinity(struct irq_data *d,
 	writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
 	raw_spin_unlock(&irq_controller_lock);
 
+	irq_data_update_effective_affinity(d, cpumask_of(cpu));
+
 	return IRQ_SET_MASK_OK;
 }
 #endif
@@ -363,6 +365,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 	} else {
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_level_irq);
+		irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(virq)));
 	}
 	irq_set_probe(virq);