watchdog: update watchdog_thresh properly

watchdog_tresh controls how often nmi perf event counter checks per-cpu
hrtimer_interrupts counter and blows up if the counter hasn't changed
since the last check.  The counter is updated by per-cpu
watchdog_hrtimer hrtimer which is scheduled with 2/5 watchdog_thresh
period which guarantees that hrtimer is scheduled 2 times per the main
period.  Both hrtimer and perf event are started together when the
watchdog is enabled.

So far so good.  But...

But what happens when watchdog_thresh is updated from sysctl handler?

proc_dowatchdog will set a new sampling period and hrtimer callback
(watchdog_timer_fn) will use the new value in the next round.  The
problem, however, is that nobody tells the perf event that the sampling
period has changed so it is ticking with the period configured when it
has been set up.

This might result in an ear ripping dissonance between perf and hrtimer
parts if the watchdog_thresh is increased.  And even worse it might lead
to KABOOM if the watchdog is configured to panic on such a spurious
lockup.

This patch fixes the issue by updating both nmi perf even counter and
hrtimers if the threshold value has changed.

The nmi one is disabled and then reinitialized from scratch.  This has
an unpleasant side effect that the allocation of the new event might
fail theoretically so the hard lockup detector would be disabled for
such cpus.  On the other hand such a memory allocation failure is very
unlikely because the original event is deallocated right before.

It would be much nicer if we just changed perf event period but there
doesn't seem to be any API to do that right now.  It is also unfortunate
that perf_event_alloc uses GFP_KERNEL allocation unconditionally so we
cannot use on_each_cpu() and do the same thing from the per-cpu context.
The update from the current CPU should be safe because
perf_event_disable removes the event atomically before it clears the
per-cpu watchdog_ev so it cannot change anything under running handler
feet.

The hrtimer is simply restarted (thanks to Don Zickus who has pointed
this out) if it is queued because we cannot rely it will fire&adopt to
the new sampling period before a new nmi event triggers (when the
treshold is decreased).

[[email protected]: the UP version of __smp_call_function_single ended up in the wrong place]
Signed-off-by: Michal Hocko <[email protected]>
Acked-by: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

include/linux/smp.h

@@ -155,6 +155,12 @@ smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
 
 static inline void kick_all_cpus_sync(void) {  }
 
+static inline void __smp_call_function_single(int cpuid,
+		struct call_single_data *data, int wait)
+{
+	on_each_cpu(data->func, data->info, wait);
+}
+
 #endif /* !SMP */
 
 /*

kernel/watchdog.c

@@ -486,7 +486,52 @@ static struct smp_hotplug_thread watchdog_threads = {
 	.unpark			= watchdog_enable,
 };
 
-static int watchdog_enable_all_cpus(void)
+static void restart_watchdog_hrtimer(void *info)
+{
+	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
+	int ret;
+
+	/*
+	 * No need to cancel and restart hrtimer if it is currently executing
+	 * because it will reprogram itself with the new period now.
+	 * We should never see it unqueued here because we are running per-cpu
+	 * with interrupts disabled.
+	 */
+	ret = hrtimer_try_to_cancel(hrtimer);
+	if (ret == 1)
+		hrtimer_start(hrtimer, ns_to_ktime(sample_period),
+				HRTIMER_MODE_REL_PINNED);
+}
+
+static void update_timers(int cpu)
+{
+	struct call_single_data data = {.func = restart_watchdog_hrtimer};
+	/*
+	 * Make sure that perf event counter will adopt to a new
+	 * sampling period. Updating the sampling period directly would
+	 * be much nicer but we do not have an API for that now so
+	 * let's use a big hammer.
+	 * Hrtimer will adopt the new period on the next tick but this
+	 * might be late already so we have to restart the timer as well.
+	 */
+	watchdog_nmi_disable(cpu);
+	__smp_call_function_single(cpu, &data, 1);
+	watchdog_nmi_enable(cpu);
+}
+
+static void update_timers_all_cpus(void)
+{
+	int cpu;
+
+	get_online_cpus();
+	preempt_disable();
+	for_each_online_cpu(cpu)
+		update_timers(cpu);
+	preempt_enable();
+	put_online_cpus();
+}
+
+static int watchdog_enable_all_cpus(bool sample_period_changed)
 {
 	int err = 0;
 
@@ -496,6 +541,8 @@ static int watchdog_enable_all_cpus(void)
 			pr_err("Failed to create watchdog threads, disabled\n");
 		else
 			watchdog_running = 1;
+	} else if (sample_period_changed) {
+		update_timers_all_cpus();
 	}
 
 	return err;
@@ -537,7 +584,7 @@ int proc_dowatchdog(struct ctl_table *table, int write,
 	 * watchdog_*_all_cpus() function takes care of this.
 	 */
 	if (watchdog_user_enabled && watchdog_thresh)
-		err = watchdog_enable_all_cpus();
+		err = watchdog_enable_all_cpus(old_thresh != watchdog_thresh);
 	else
 		watchdog_disable_all_cpus();
 
@@ -557,5 +604,5 @@ void __init lockup_detector_init(void)
 	set_sample_period();
 
 	if (watchdog_user_enabled)
-		watchdog_enable_all_cpus();
+		watchdog_enable_all_cpus(false);
 }