Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie: "Lots of stuff in here, though it hasn't been too insane this merge apart from dealing with the security fun. uapi: - export different colorspace properties on DP vs HDMI - new fourcc for ARM 16x16 block format - syncobj: allow querying last submitted timeline value - DRM_FORMAT_BIG_ENDIAN defined as unsigned core: - allow using gem vma manager in ttm - connector/encoder/bridge doc fixes - allow more than 3 encoders for a connector - displayport mst suspend/resume reprobing support - vram lazy unmapping, uniform vram mm and gem vram - edid cleanups + AVI informframe bar info - displayport helpers - dpcd parser added dp_cec: - Allow a connector to be associated with a cec device ttm: - pipelining with no_gpu_wait fix - always keep BOs on the LRU sched: - allow free_job routine to sleep i915: - Block userptr from mappable GTT - i915 perf uapi versioning - OA stream dynamic reconfiguration - make context persistence optional - introduce DRM_I915_UNSTABLE Kconfig - add fake lmem testing under unstable - BT.2020 support for DP MSA - struct mutex elimination - Tigerlake display/PLL/power management improvements - Jasper Lake PCH support - refactor PMU for multiple GPUs - Icelake firmware update - Split out vga + switcheroo code amdgpu: - implement dma-buf import/export without helpers - vega20 RAS enablement - DC i2c over aux fixes - renoir GPU reset - DC HDCP support - BACO support for CI/VI asics - MSI-X support - Arcturus EEPROM support - Arcturus VCN encode support - VCN dynamic powergating on RV/RV2 amdkfd: - add navi12/14/renoir support to kfd radeon: - SI dpm fix ported from amdgpu - fix bad DMA on ppc platforms gma500: - memory leak fixes qxl: - convert to new gem mmap exynos: - build warning fix komeda: - add aclk sysfs attribute v3d: - userspace cleanup uapi change i810: - fix for underflow in dispatch ioctls ast: - refactor show_cursor mgag200: - refactor show_cursor arcgpu: - encoder finding improvements mediatek: - mipi_tx, dsi and partial crtc support for MT8183 SoC - rotation support meson: - add suspend/resume support omap: - misc refactors tegra: - DisplayPort support for Tegra 210, 186 and 194. - IOMMU-backed DMA API fixes panfrost: - fix lockdep issue - simplify devfreq integration rcar-du: - R8A774B1 SoC support - fixes for H2 ES2.0 sun4i: - vcc-dsi regulator support virtio-gpu: - vmexit vs spinlock fix - move to gem shmem helpers - handle large command buffers with cma" * tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits) drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10 drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF. drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF drm/amdgpu/gfx10: re-init clear state buffer after gpu reset merge fix for "ftrace: Rework event_create_dir()" drm/amdgpu: Update Arcturus golden registers drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: remove experimental flag for Navi14 drm/amdgpu: disable gfxoff when using register read interface drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2) drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 drm/radeon: fix bad DMA from INTERRUPT_CNTL2 drm/amd/display: Fix debugfs on MST connectors drm/amdgpu/nv: add asic func for fetching vbios from rom directly drm/amdgpu: put flush_delayed_work at first drm/amdgpu/vcn2.5: fix the enc loop with hw fini ...
ambv · Nov 28, 2019 · a6ed68d · a6ed68d
2 parents 8c39f71 + acc61b8
commit a6ed68d
Show file tree

Hide file tree

Showing 1,122 changed files with 61,274 additions and 29,902 deletions.
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -36,6 +36,9 @@ properties:
   resets:
     maxItems: 1
 
+  vcc-dsi-supply:
+    description: VCC-DSI power supply of the DSI encoder
+
   phys:
     maxItems: 1
 
@@ -64,6 +67,7 @@ required:
   - phys
   - phy-names
   - resets
+  - vcc-dsi-supply
   - port
 
 additionalProperties: false
@@ -79,6 +83,7 @@ examples:
         resets = <&ccu 4>;
         phys = <&dphy0>;
         phy-names = "dphy";
+        vcc-dsi-supply = <&reg_dcdc1>;
         #address-cells = <1>;
         #size-cells = <0>;
 

diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
@@ -37,6 +37,8 @@ Optional properties:
     Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
     to be used for the framebuffer; if not present, the framebuffer may
     be located anywhere in memory.
+  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
+    levels of DP500's QoS signaling.
 
 
 Example:
@@ -54,6 +56,7 @@ Example:
 		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+		arm,malidp-arqos-high-level = <0xd000d000>;
 		port {
 			dp0_output: endpoint {
 				remote-endpoint = <&tda998x_2_input>;

diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
@@ -6,7 +6,11 @@ designed for portable devices.
 
 Required properties:
 
- - compatible		: "analogix,anx7814"
+ - compatible		: Must be one of:
+			  "analogix,anx7808"
+			  "analogix,anx7812"
+			  "analogix,anx7814"
+			  "analogix,anx7818"
  - reg			: I2C address of the device
  - interrupts		: Should contain the INTP interrupt
  - hpd-gpios		: Which GPIO to use for hpd

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -13,6 +13,7 @@ Required properties:
 
 - compatible : Shall contain one or more of
   - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX
+  - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX
   - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
   - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
   - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -10,6 +10,7 @@ Required properties:
   - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
   - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders
   - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders
+  - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders
   - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders
   - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
   - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -27,19 +27,22 @@ Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt.
 
 Required properties (all function blocks):
 - compatible: "mediatek,<chip>-disp-<function>", one of
-	"mediatek,<chip>-disp-ovl"   - overlay (4 layers, blending, csc)
-	"mediatek,<chip>-disp-rdma"  - read DMA / line buffer
-	"mediatek,<chip>-disp-wdma"  - write DMA
-	"mediatek,<chip>-disp-color" - color processor
-	"mediatek,<chip>-disp-aal"   - adaptive ambient light controller
-	"mediatek,<chip>-disp-gamma" - gamma correction
-	"mediatek,<chip>-disp-merge" - merge streams from two RDMA sources
-	"mediatek,<chip>-disp-split" - split stream to two encoders
-	"mediatek,<chip>-disp-ufoe"  - data compression engine
-	"mediatek,<chip>-dsi"        - DSI controller, see mediatek,dsi.txt
-	"mediatek,<chip>-dpi"        - DPI controller, see mediatek,dpi.txt
-	"mediatek,<chip>-disp-mutex" - display mutex
-	"mediatek,<chip>-disp-od"    - overdrive
+	"mediatek,<chip>-disp-ovl"   		- overlay (4 layers, blending, csc)
+	"mediatek,<chip>-disp-ovl-2l"           - overlay (2 layers, blending, csc)
+	"mediatek,<chip>-disp-rdma"  		- read DMA / line buffer
+	"mediatek,<chip>-disp-wdma"  		- write DMA
+	"mediatek,<chip>-disp-ccorr"            - color correction
+	"mediatek,<chip>-disp-color" 		- color processor
+	"mediatek,<chip>-disp-dither"           - dither
+	"mediatek,<chip>-disp-aal"   		- adaptive ambient light controller
+	"mediatek,<chip>-disp-gamma" 		- gamma correction
+	"mediatek,<chip>-disp-merge" 		- merge streams from two RDMA sources
+	"mediatek,<chip>-disp-split" 		- split stream to two encoders
+	"mediatek,<chip>-disp-ufoe"  		- data compression engine
+	"mediatek,<chip>-dsi"        		- DSI controller, see mediatek,dsi.txt
+	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
+	"mediatek,<chip>-disp-mutex" 		- display mutex
+	"mediatek,<chip>-disp-od"    		- overdrive
   the supported chips are mt2701, mt2712 and mt8173.
 - reg: Physical base address and length of the function block register space
 - interrupts: The interrupt signal from the function block (required, except for
@@ -49,6 +52,7 @@ Required properties (all function blocks):
   For most function blocks this is just a single clock input. Only the DSI and
   DPI controller nodes have multiple clock inputs. These are documented in
   mediatek,dsi.txt and mediatek,dpi.txt, respectively.
+  An exception is that the mt8183 mutex is always free running with no clocks property.
 
 Required properties (DMA function blocks):
 - compatible: Should be one of

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-  the supported chips are mt2701 and mt8173.
+  the supported chips are mt2701, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
 
 Required properties:
 - compatible: "mediatek,<chip>-mipi-tx"
-  the supported chips are mt2701 and mt8173.
+  the supported chips are mt2701, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - clocks: PLL reference clock
 - clock-output-names: name of the output clock line to the DSI encoder

diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -8,6 +8,7 @@ Required Properties:
     - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
     - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
     - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
+    - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
     - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
     - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
@@ -60,6 +61,7 @@ corresponding to each DU output.
  R8A7745 (RZ/G1E)       DPAD 0         DPAD 1         -              -
  R8A77470 (RZ/G1C)      DPAD 0         DPAD 1         LVDS 0         -
  R8A774A1 (RZ/G2M)      DPAD 0         HDMI 0         LVDS 0         -
+ R8A774B1 (RZ/G2N)      DPAD 0         HDMI 0         LVDS 0         -
  R8A774C0 (RZ/G2E)      DPAD 0         LVDS 0         LVDS 1         -
  R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
  R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -20,6 +20,10 @@ Required properties:
 		"rockchip,rk3228-vop";
 		"rockchip,rk3328-vop";
 
+- reg: Must contain one entry corresponding to the base address and length
+	of the register space. Can optionally contain a second entry
+	corresponding to the CRTC gamma LUT address.
+
 - interrupts: should contain a list of all VOP IP block interrupts in the
 		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
 		 format depends on the interrupt controller used.
@@ -48,7 +52,7 @@ Example:
 SoC specific DT entry:
 	vopb: vopb@ff930000 {
 		compatible = "rockchip,rk3288-vop";
-		reg = <0xff930000 0x19c>;
+		reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";

diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
@@ -118,13 +118,13 @@ Kernel Functions and Structures Reference
 Reservation Objects
 -------------------
 
-.. kernel-doc:: drivers/dma-buf/reservation.c
+.. kernel-doc:: drivers/dma-buf/dma-resv.c
    :doc: Reservation Object Overview
 
-.. kernel-doc:: drivers/dma-buf/reservation.c
+.. kernel-doc:: drivers/dma-buf/dma-resv.c
    :export:
 
-.. kernel-doc:: include/linux/reservation.h
+.. kernel-doc:: include/linux/dma-resv.h
    :internal:
 
 DMA Fences

diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst
@@ -79,16 +79,71 @@ AMDGPU XGMI Support
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
    :internal:
 
-AMDGPU RAS debugfs control interface
-====================================
+AMDGPU RAS Support
+==================
+
+The AMDGPU RAS interfaces are exposed via sysfs (for informational queries) and
+debugfs (for error injection).
+
+RAS debugfs/sysfs Control and Error Injection Interfaces
+--------------------------------------------------------
 
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
    :doc: AMDGPU RAS debugfs control interface
 
+RAS Reboot Behavior for Unrecoverable Errors
+--------------------------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS Reboot Behavior for Unrecoverable Errors
+
+RAS Error Count sysfs Interface
+-------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS sysfs Error Count Interface
+
+RAS EEPROM debugfs Interface
+----------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS debugfs EEPROM table reset interface
+
+RAS VRAM Bad Pages sysfs Interface
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS sysfs gpu_vram_bad_pages Interface
 
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
    :internal:
 
+Sample Code
+-----------
+Sample code for testing error injection can be found here:
+https://cgit.freedesktop.org/mesa/drm/tree/tests/amdgpu/ras_tests.c
+
+This is part of the libdrm amdgpu unit tests which cover several areas of the GPU.
+There are four sets of tests:
+
+RAS Basic Test
+
+The test verifies the RAS feature enabled status and makes sure the necessary sysfs and debugfs files
+are present.
+
+RAS Query Test
+
+This test checks the RAS availability and enablement status for each supported IP block as well as
+the error counts.
+
+RAS Inject Test
+
+This test injects errors for each IP.
+
+RAS Disable Test
+
+This test tests disabling of RAS features for each IP block.
+
 
 GPU Power/Thermal Controls and Monitoring
 =========================================
@@ -130,11 +185,11 @@ pp_od_clk_voltage
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
    :doc: pp_od_clk_voltage
 
-pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+pp_dpm_*
+~~~~~~~~
 
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
-   :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
+   :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_socclk pp_dpm_fclk pp_dpm_dcefclk pp_dpm_pcie
 
 pp_power_profile_mode
 ~~~~~~~~~~~~~~~~~~~~~

diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
@@ -77,9 +77,6 @@ Atomic State Reset and Initialization
 Atomic State Helper Reference
 -----------------------------
 
-.. kernel-doc:: include/drm/drm_atomic_state_helper.h
-   :internal:
-
 .. kernel-doc:: drivers/gpu/drm/drm_atomic_state_helper.c
    :export:
 

diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
@@ -400,16 +400,13 @@ GEM VRAM Helper Functions Reference
 .. kernel-doc:: drivers/gpu/drm/drm_gem_vram_helper.c
    :export:
 
-VRAM MM Helper Functions Reference
-----------------------------------
+GEM TTM Helper Functions Reference
+-----------------------------------
 
-.. kernel-doc:: drivers/gpu/drm/drm_vram_mm_helper.c
+.. kernel-doc:: drivers/gpu/drm/drm_gem_ttm_helper.c
    :doc: overview
 
-.. kernel-doc:: include/drm/drm_vram_mm_helper.h
-   :internal:
-
-.. kernel-doc:: drivers/gpu/drm/drm_vram_mm_helper.c
+.. kernel-doc:: drivers/gpu/drm/drm_gem_ttm_helper.c
    :export:
 
 VMA Offset Manager