Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...

Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt

@@ -5,7 +5,7 @@ with HDMI output and the HVS (Hardware Video Scaler) for compositing
 display planes.
 
 Required properties for VC4:
-- compatible:	Should be "brcm,bcm2835-vc4"
+- compatible:	Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4"
 
 Required properties for Pixel Valve:
 - compatible:	Should be one of "brcm,bcm2835-pixelvalve0",
@@ -54,11 +54,14 @@ Required properties for VEC:
 		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
 Required properties for V3D:
-- compatible:	Should be "brcm,bcm2835-v3d"
+- compatible:	Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d"
 - reg:		Physical base address and length of the V3D's registers
 - interrupts:	The interrupt number
 		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
+Optional properties for V3D:
+- clocks:	The clock the unit runs on
+
 Required properties for DSI:
 - compatible:	Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1"
 - reg:		Physical base address and length of the DSI block's registers

Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt

@@ -8,12 +8,13 @@ Required properties:
 - compatible: value should be one of:
 	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
 - reg: physical base address and length of the DECON registers set.
-- interrupts: should contain a list of all DECON IP block interrupts in the
-	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
-	      depends on the interrupt controller used.
-- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
-		   in the same order as they were listed in the interrupts
-		   property.
+- interrupt-names: should contain the interrupt names depending on mode of work:
+		video mode: "vsync",
+		command mode: "lcd_sys",
+		command mode with software trigger: "lcd_sys", "te".
+- interrupts or interrupts-extended: list of interrupt specifiers corresponding
+		to names privided in interrupt-names, as described in
+		interrupt-controller/interrupts.txt
 - clocks: must include clock specifiers corresponding to entries in the
 	  clock-names property.
 - clock-names: list of clock names sorted in the same order as the clocks

Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt

@@ -0,0 +1,8 @@
+AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,p320hvn03"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt

@@ -0,0 +1,23 @@
+Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p079zca"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel {
+			compatible = "innolux,p079zca";
+			reg = <0>;
+			power-supply = <...>;
+			backlight = <&backlight>;
+			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};

Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt

@@ -0,0 +1,8 @@
+NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
+
+Required properties:
+- compatible: should be "nec,nl12880bc20-05"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt

@@ -0,0 +1,8 @@
+NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+
+Required properties:
+- compatible: should be "nlt,nl192108ac18-02d"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt

@@ -1,7 +1,10 @@
 Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
 
 Required properties:
-  - compatible: "samsung,s6e3ha2"
+  - compatible: should be one of:
+    "samsung,s6e3ha2",
+    "samsung,s6e3hf2".
   - reg: the virtual channel number of a DSI peripheral
   - vdd3-supply: I/O voltage supply
   - vci-supply: voltage supply for analog circuits

Documentation/devicetree/bindings/display/st,stm32-ltdc.txt

@@ -0,0 +1,36 @@
+* STMicroelectronics STM32 lcd-tft display controller
+
+- ltdc: lcd-tft display controller host
+  must be a sub-node of st-display-subsystem
+  Required properties:
+  - compatible: "st,stm32-ltdc"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: A list of phandle + clock-specifier pairs, one for each
+    entry in 'clock-names'.
+  - clock-names: A list of clock names. For ltdc it should contain:
+      - "lcd" for the clock feeding the output pixel clock & IP clock.
+  - resets: reset to be used by the device (defined by use of RCC macro).
+  Required nodes:
+    - Video port for RGB output.
+
+Example:
+
+/ {
+	...
+	soc {
+	...
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+
+			port {
+				ltdc_out_rgb: endpoint {
+				};
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt

@@ -4,6 +4,44 @@ Allwinner A10 Display Pipeline
 The Allwinner A10 Display pipeline is composed of several components
 that are going to be documented below:
 
+For the input port of all components up to the TCON in the display
+pipeline, if there are multiple components, the local endpoint IDs
+must correspond to the index of the upstream block. For example, if
+the remote endpoint is Frontend 1, then the local endpoint ID must
+be 1.
+
+Conversely, for the output ports of the same group, the remote endpoint
+ID must be the index of the local hardware block. If the local backend
+is backend 1, then the remote endpoint ID must be 1.
+
+HDMI Encoder
+------------
+
+The HDMI Encoder supports the HDMI video and audio outputs, and does
+CEC. It is one end of the pipeline.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun5i-a10s-hdmi
+  - reg: base address and size of memory-mapped region
+  - interrupts: interrupt associated to this IP
+  - clocks: phandles to the clocks feeding the HDMI encoder
+    * ahb: the HDMI interface clock
+    * mod: the HDMI module clock
+    * pll-0: the first video PLL
+    * pll-1: the second video PLL
+  - clock-names: the clock names mentioned above
+  - dmas: phandles to the DMA channels used by the HDMI encoder
+    * ddc-tx: The channel for DDC transmission
+    * ddc-rx: The channel for DDC reception
+    * audio-tx: The channel used for audio transmission
+  - dma-names: the channel names mentioned above
+
+  - ports: A ports node with endpoint definitions as defined in
+    Documentation/devicetree/bindings/media/video-interfaces.txt. The
+    first port should be the input endpoint. The second should be the
+    output, usually to an HDMI connector.
+
 TV Encoder
 ----------
 
@@ -31,6 +69,7 @@ Required properties:
    * allwinner,sun6i-a31-tcon
    * allwinner,sun6i-a31s-tcon
    * allwinner,sun8i-a33-tcon
+   * allwinner,sun8i-v3s-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
  - clocks: phandles to the clocks feeding the TCON. Three are needed:
@@ -47,12 +86,15 @@ Required properties:
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoint, the second one the output
 
-  The output should have two endpoints. The first is the block
-  connected to the TCON channel 0 (usually a panel or a bridge), the
-  second the block connected to the TCON channel 1 (usually the TV
-  encoder)
+  The output may have multiple endpoints. The TCON has two channels,
+  usually with the first channel being used for the panels interfaces
+  (RGB, LVDS, etc.), and the second being used for the outputs that
+  require another controller (TV Encoder, HDMI, etc.). The endpoints
+  will take an extra property, allwinner,tcon-channel, to specify the
+  channel the endpoint is associated to. If that property is not
+  present, the endpoint number will be used as the channel number.
 
-On SoCs other than the A33, there is one more clock required:
+On SoCs other than the A33 and V3s, there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1
 
 DRC
@@ -138,6 +180,26 @@ Required properties:
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoints, the second one the outputs
 
+Display Engine 2.0 Mixer
+------------------------
+
+The DE2 mixer have many functionalities, currently only layer blending is
+supported.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun8i-v3s-de2-mixer
+  - reg: base address and size of the memory-mapped region.
+  - clocks: phandles to the clocks feeding the mixer
+    * bus: the mixer interface clock
+    * mod: the mixer module clock
+  - clock-names: the clock names mentioned above
+  - resets: phandles to the reset controllers driving the mixer
+
+- ports: A ports node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. The
+  first port should be the input endpoints, the second one the output
+
 
 Display Engine Pipeline
 -----------------------
@@ -148,13 +210,15 @@ extra node.
 
 Required properties:
   - compatible: value must be one of:
+    * allwinner,sun5i-a10s-display-engine
     * allwinner,sun5i-a13-display-engine
     * allwinner,sun6i-a31-display-engine
     * allwinner,sun6i-a31s-display-engine
     * allwinner,sun8i-a33-display-engine
+    * allwinner,sun8i-v3s-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
-    frontends available.
+    frontends (DE 1.0) or mixers (DE 2.0) available.
 
 Example:
 
@@ -173,6 +237,57 @@ panel: panel {
 	};
 };
 
+connector {
+	compatible = "hdmi-connector";
+	type = "a";
+
+	port {
+		hdmi_con_in: endpoint {
+			remote-endpoint = <&hdmi_out_con>;
+		};
+	};
+};
+
+hdmi: hdmi@01c16000 {
+	compatible = "allwinner,sun5i-a10s-hdmi";
+	reg = <0x01c16000 0x1000>;
+	interrupts = <58>;
+	clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
+		 <&ccu CLK_PLL_VIDEO0_2X>,
+		 <&ccu CLK_PLL_VIDEO1_2X>;
+	clock-names = "ahb", "mod", "pll-0", "pll-1";
+	dmas = <&dma SUN4I_DMA_NORMAL 16>,
+	       <&dma SUN4I_DMA_NORMAL 16>,
+	       <&dma SUN4I_DMA_DEDICATED 24>;
+	dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+	status = "disabled";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			hdmi_in_tcon0: endpoint {
+				remote-endpoint = <&tcon0_out_hdmi>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			hdmi_out_con: endpoint {
+				remote-endpoint = <&hdmi_con_in>;
+			};
+		};
+	};
+};
+
 tve0: tv-encoder@01c0a000 {
 	compatible = "allwinner,sun4i-a10-tv-encoder";
 	reg = <0x01c0a000 0x1000>;

Documentation/devicetree/bindings/display/zte,vou.txt

@@ -58,6 +58,18 @@ Required properties:
    integer cells.  The first cell is the offset of SYSCTRL register used
    to control TV Encoder DAC power, and the second cell is the bit mask.
 
+* VGA output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-vga"
+ - reg: Physical base address and length of the VGA device IO region
+ - interrupts : VGA interrupt number to CPU
+ - clocks: Phandle with clock-specifier pointing to VGA I2C clock.
+ - clock-names: Must be "i2c_wclk".
+ - zte,vga-power-control: the phandle to SYSCTRL block followed by two
+   integer cells.  The first cell is the offset of SYSCTRL register used
+   to control VGA DAC power, and the second cell is the bit mask.
+
 Example:
 
 vou: vou@1440000 {
@@ -81,6 +93,15 @@ vou: vou@1440000 {
 			      "main_wclk", "aux_wclk";
 	};
 
+	vga: vga@8000 {
+		compatible = "zte,zx296718-vga";
+		reg = <0x8000 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topcrm VGA_I2C_WCLK>;
+		clock-names = "i2c_wclk";
+		zte,vga-power-control = <&sysctrl 0x170 0xe0>;
+	};
+
 	hdmi: hdmi@c000 {
 		compatible = "zte,zx296718-hdmi";
 		reg = <0xc000 0x4000>;

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -227,6 +227,7 @@ nexbox	Nexbox
 newhaven	Newhaven Display International
 ni	National Instruments
 nintendo	Nintendo
+nlt	NLT Technologies, Ltd.
 nokia	Nokia
 nordic	Nordic Semiconductor
 nuvoton	Nuvoton Technology Corporation