Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "SoC specific code is generally used for older platforms that don't
  (yet) use device tree to do the same things.

   - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
     from NXP. At the moment this is still incomplete as other portions
     are merged through different trees.

   - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
     gets removed, now the Arm NOMMU platforms are limited to the
     Cortex-M family of microcontrollers

   - Two old PXA boards get removed, along with corresponding driver
     bits.

   - Continued cleanup of the Intel IXP4xx platforms, removing some
     remnants of the old board files.

   - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung

   - CPU idle support for AT91

   - A system controller driver for Polarfire"

* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: remove support for NOMMU ARMv4/v5
  ARM: PXA: fix up decompressor code
  soc: microchip: make mpfs_sys_controller_put static
  ARM: pxa: remove Intel Imote2 and Stargate 2 boards
  ARM: mmp: Fix failure to remove sram device
  ARM: mstar: Select ARM_ERRATA_814220
  soc: add microchip polarfire soc system controller
  ARM: at91: Kconfig: select PM_OPP
  ARM: at91: PM: add cpu idle support for sama7g5
  ARM: at91: ddr: fix typo to align with datasheet naming
  ARM: at91: ddr: align macro definitions
  ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
  ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
  ARM: ixp4xx: Drop all common code
  ARM: ixp4xx: Drop custom DMA coherency and bouncing
  ARM: ixp4xx: Remove feature bit accessors
  net: ixp4xx_hss: Check features using syscon
  net: ixp4xx_eth: Drop platform data support
  soc: ixp4xx-npe: Access syscon regs using regmap
  soc: ixp4xx: Add features from regmap helper
  ...

Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml

@@ -17,13 +17,6 @@ description: |
   child nodes, each representing a serial sub-node device. The mode setting
   selects which particular function will be used.
 
-  Refer to next bindings documentation for information on protocol subnodes that
-  can exist under USI node:
-
-  [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
-  [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
-  [3] Documentation/devicetree/bindings/spi/samsung,spi.yaml
-
 properties:
   $nodename:
     pattern: "^usi@[0-9a-f]+$"
@@ -71,10 +64,17 @@ properties:
       This property is optional.
 
 patternProperties:
-  # All other properties should be child nodes
-  "^(serial|spi|i2c)@[0-9a-f]+$":
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/i2c-exynos5.yaml
+    description: Child node describing underlying I2C
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+    description: Child node describing underlying UART/serial
+
+  "^spi@[0-9a-f]+$":
     type: object
-    description: Child node describing underlying USI serial protocol
+    description: Child node describing underlying SPI
 
 required:
   - compatible

MAINTAINERS

@@ -2117,13 +2117,6 @@ F:	Documentation/devicetree/bindings/arm/intel,keembay.yaml
 F:	arch/arm64/boot/dts/intel/keembay-evm.dts
 F:	arch/arm64/boot/dts/intel/keembay-soc.dtsi
 
-ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
-M:	Jonathan Cameron <[email protected]>
-L:	[email protected] (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-pxa/stargate2.c
-F:	drivers/pcmcia/pxa2xx_stargate2.c
-
 ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <[email protected]>
 L:	[email protected] (moderated for non-subscribers)

arch/arm/Kconfig

@@ -233,9 +233,6 @@ config ARCH_MAY_HAVE_PC_FDC
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
@@ -279,7 +276,7 @@ config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_FOOTBRIDGE || ARCH_IXP4XX
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x30000000 if ARCH_S3C24XX
 	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
@@ -307,6 +304,17 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select AUTO_ZRELADDR
+	select TIMER_OF
+	select COMMON_CLK
+	select CPU_V7M
+	select NO_IOPORT_MAP
+	select SPARSE_IRQ
+	select USE_OF
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -321,12 +329,11 @@ config ARCH_MMAP_RND_BITS_MAX
 #
 choice
 	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
+	depends on MMU
+	default ARCH_MULTIPLATFORM
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
-	depends on MMU
 	select ARCH_FLATMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
@@ -340,18 +347,6 @@ config ARCH_MULTIPLATFORM
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_SPARSEMEM_ENABLE
@@ -370,15 +365,13 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
-	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
-	depends on MMU
 	select CPU_XSCALE
 	select GPIO_IOP
 	select GPIOLIB
@@ -390,18 +383,15 @@ config ARCH_IOP32X
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select ARCH_SUPPORTS_BIG_ENDIAN
+	select ARM_PATCH_PHYS_VIRT
 	select CPU_XSCALE
-	select DMABOUNCE if PCI
 	select GPIO_IXP4XX
 	select GPIOLIB
 	select HAVE_PCI
 	select IXP4XX_IRQ
 	select IXP4XX_TIMER
-	# With the new PCI driver this is not needed
-	select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
+	select SPARSE_IRQ
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
@@ -423,7 +413,6 @@ config ARCH_DOVE
 
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
 	select ARCH_MTD_XIP
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
@@ -442,7 +431,6 @@ config ARCH_PXA
 
 config ARCH_RPC
 	bool "RiscPC"
-	depends on MMU
 	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
@@ -497,7 +485,6 @@ config ARCH_S3C24XX
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
-	depends on MMU
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP

arch/arm/configs/pxa_defconfig

@@ -41,8 +41,6 @@ CONFIG_MACH_EXEDA=y
 CONFIG_MACH_CM_X300=y
 CONFIG_MACH_CAPC7117=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_MACH_STARGATE2=y
 CONFIG_MACH_XCEP=y
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4WL=y
@@ -487,7 +485,6 @@ CONFIG_SND_SOC_ZYLONITE=m
 CONFIG_SND_PXA2XX_SOC_HX4700=m
 CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
 CONFIG_SND_PXA2XX_SOC_MIOA701=m
-CONFIG_SND_PXA2XX_SOC_IMOTE2=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SIMPLE_CARD=m

arch/arm/mach-at91/Kconfig

@@ -63,6 +63,7 @@ config SOC_SAMA7G5
 	select HAVE_AT91_GENERATED_CLK
 	select HAVE_AT91_SAM9X60_PLL
 	select HAVE_AT91_UTMI
+	select PM_OPP
 	select SOC_SAMA7
 	help
 	  Select this if you are using one of Microchip's SAMA7G5 family SoC.

arch/arm/mach-at91/pm.c

@@ -605,6 +605,30 @@ static void at91sam9_sdram_standby(void)
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
+static void sama7g5_standby(void)
+{
+	int pwrtmg, ratio;
+
+	pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	/*
+	 * Place RAM into self-refresh after a maximum idle clocks. The maximum
+	 * idle clocks is configured by bootloader in
+	 * UDDRC_PWRMGT.SELFREF_TO_X32.
+	 */
+	writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
+	       soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	/* Divide CPU clock by 16. */
+	writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	cpu_do_idle();
+
+	/* Restore previous configuration. */
+	writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
+	writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+}
+
 struct ramc_info {
 	void (*idle)(void);
 	unsigned int memctrl;
@@ -615,14 +639,15 @@ static const struct ramc_info ramc_infos[] __initconst = {
 	{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
 	{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
 	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+	{ .idle = sama7g5_standby, },
 };
 
 static const struct of_device_id ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
 	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
-	{ .compatible = "microchip,sama7g5-uddrc", },
+	{ .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
 	{ /*sentinel*/ }
 };
 

arch/arm/mach-at91/pm_suspend.S

@@ -159,7 +159,7 @@ sr_ena_1:
 
 	/* Switch to self-refresh. */
 	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-	orr	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	orr	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
 	str	tmp1, [r2, #UDDRC_PWRCTL]
 
 sr_ena_2:
@@ -276,7 +276,7 @@ sr_dis_5:
 
 	/* Trigger self-refresh exit. */
 	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-	bic	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	bic	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
 	str	tmp1, [r2, #UDDRC_PWRCTL]
 
 sr_dis_6:

arch/arm/mach-bcm/Kconfig

@@ -185,7 +185,6 @@ config ARCH_BCM_53573
 config ARCH_BCM_63XX
 	bool "Broadcom BCM63xx DSL SoC"
 	depends on ARCH_MULTI_V7
-	depends on MMU
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP

arch/arm/mach-dove/irq.c

@@ -73,12 +73,12 @@ void __init dove_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 }

arch/arm/mach-exynos/firmware.c

@@ -60,8 +60,10 @@ static int exynos_cpu_boot(int cpu)
 	/*
 	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
 	 * because Exynos3250 removes WFE in secure mode.
+	 *
+	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (soc_is_exynos3250())
+	if (!soc_is_exynos4210() && !soc_is_exynos4412())
 		return 0;
 
 	/*

arch/arm/mach-footbridge/include/mach/hardware.h

@@ -21,32 +21,26 @@
  * 0xf0000000	0x80000000	16MB	ISA memory
  */
 
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
 #define XBUS_SIZE		0x00100000
-#define XBUS_BASE		MMU_IO(0xff800000, 0x40000000)
+#define XBUS_BASE		0xff800000
 
 #define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		MMU_IO(0xfe000000, 0x42000000)
+#define ARMCSR_BASE		0xfe000000
 
 #define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		MMU_IO(0xfd000000, 0x78000000)
+#define WFLUSH_BASE		0xfd000000
 
 #define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		MMU_IO(0xfc000000, 0x79000000)
+#define PCIIACK_BASE		0xfc000000
 
 #define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		MMU_IO(0xfb000000, 0x7a000000)
+#define PCICFG1_BASE		0xfb000000
 
 #define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		MMU_IO(0xfa000000, 0x7b000000)
+#define PCICFG0_BASE		0xfa000000
 
 #define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
+#define PCIMEM_BASE		0xf0000000
 
 #define XBUS_CS2		0x40012000
 

arch/arm/mach-imx/Kconfig

@@ -227,6 +227,13 @@ config SOC_IMX7ULP
 	help
 	  This enables support for Freescale i.MX7 Ultra Low Power processor.
 
+config SOC_IMXRT
+	bool "i.MXRT support"
+	depends on ARM_SINGLE_ARMV7M
+	select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+	help
+	  This enables support for Freescale i.MXRT Crossover processor.
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7

arch/arm/mach-imx/Makefile

@@ -63,6 +63,8 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
+obj-$(CONFIG_SOC_IMXRT) += mach-imxrt.o
+
 obj-$(CONFIG_SOC_VF610) += mach-vf610.o
 
 obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o