Merge 5.4-rc5 into char-misc-next

We want the binder fix in here as well for testing and to work on top
of.

Also handles a merge issue in binder.c to help linux-next out

Signed-off-by: Greg Kroah-Hartman <[email protected]>

.mailmap

@@ -196,7 +196,8 @@ Oleksij Rempel <[email protected]> <[email protected]>
 Oleksij Rempel <[email protected]> <[email protected]>
 Paolo 'Blaisorblade' Giarrusso <[email protected]>
 Patrick Mochel <[email protected]>
-Paul Burton <[email protected]> <[email protected]>
+Paul Burton <[email protected]> <[email protected]>
+Paul Burton <[email protected]> <[email protected]>
 Peter A Jonsson <[email protected]>
 Peter Oruba <[email protected]>
 Peter Oruba <[email protected]>
@@ -229,6 +230,7 @@ Shuah Khan <[email protected]> <[email protected]>
 Shuah Khan <[email protected]> <[email protected]>
 Shuah Khan <[email protected]> <[email protected]>
 Shuah Khan <[email protected]> <[email protected]>
+Simon Arlott <[email protected]> <[email protected]>
 Simon Kelley <[email protected]>
 Stéphane Witzmann <[email protected]>
 Stephen Hemminger <[email protected]>

Documentation/arm64/silicon-errata.rst

@@ -107,6 +107,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/dev-tools/kasan.rst

@@ -41,6 +41,9 @@ smaller binary while the latter is 1.1 - 2 times faster.
 Both KASAN modes work with both SLUB and SLAB memory allocators.
 For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
 
+To augment reports with last allocation and freeing stack of the physical page,
+it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on.
+
 To disable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:
 

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -496,12 +496,12 @@ properties:
 
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
-          - const: tsd,rk3368-uq7-haikou
+          - const: tsd,rk3368-lion-haikou
           - const: rockchip,rk3368
 
       - description: Theobroma Systems RK3399-Q7 with Haikou baseboard
         items:
-          - const: tsd,rk3399-q7-haikou
+          - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
       - description: Tronsmart Orion R68 Meta

Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt

@@ -1,8 +1,11 @@
 * Advanced Interrupt Controller (AIC)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
@@ -27,14 +27,12 @@ properties:
   clocks:
     items:
       - description: The CSI interface clock
-      - description: The CSI module clock
       - description: The CSI ISP clock
       - description: The CSI DRAM clock
 
   clock-names:
     items:
       - const: bus
-      - const: mod
       - const: isp
       - const: ram
 
@@ -89,9 +87,8 @@ examples:
         compatible = "allwinner,sun7i-a20-csi0";
         reg = <0x01c09000 0x1000>;
         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-                 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-        clock-names = "bus", "mod", "isp", "ram";
+        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+        clock-names = "bus", "isp", "ram";
         resets = <&ccu RST_CSI0>;
 
         port {

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -33,13 +33,13 @@ patternProperties:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
             - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1,
-              GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2,
-              GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12,
-              I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7,
-              I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC,
-              LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
+              ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
+              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
+              I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
+              I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
               MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
               NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
               NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
@@ -48,47 +48,45 @@ patternProperties:
               PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
               RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
               SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
-              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5,
-              SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1,
-              SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
-              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5,
-              TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1,
-              TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7,
-              UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
+              UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+              WDTRST3, WDTRST4, ]
         groups:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
             - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0,
-              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1,
-              I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3,
-              I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6,
-              JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
-              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3,
-              MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
-              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1,
-              NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE,
-              PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1,
-              PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3,
-              PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
-              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
-              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1,
-              SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1,
-              SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1,
-              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0,
-              SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7,
-              SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD,
-              SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
-              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13,
-              TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8,
-              TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4,
-              UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
-              UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
+              EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
+              FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
+              GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
+              GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
+              I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
+              I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
+              LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
+              MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
+              NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
+              PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
+              PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
+              PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
+              RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
+              SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
+              SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
+              SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
+              SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
+              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
+              VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
 
 required:
   - compatible

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -30,8 +30,8 @@ if:
 properties:
   compatible:
     enum:
-      - const: regulator-fixed
-      - const: regulator-fixed-clock
+      - regulator-fixed
+      - regulator-fixed-clock
 
   regulator-name: true
 

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -24,15 +24,17 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,rocket0
-          - sifive,e5
-          - sifive,e51
-          - sifive,u54-mc
-          - sifive,u54
-          - sifive,u5
-      - const: riscv
+    oneOf:
+      - items:
+          - enum:
+              - sifive,rocket0
+              - sifive,e5
+              - sifive,e51
+              - sifive,u54-mc
+              - sifive,u54
+              - sifive,u5
+          - const: riscv
+      - const: riscv    # Simulator only
     description:
       Identifies that the hart uses the RISC-V instruction set
       and identifies the type of the hart.
@@ -66,12 +68,8 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
 
-  timebase-frequency:
-    type: integer
-    minimum: 1
-    description:
-      Specifies the clock frequency of the system timer in Hz.
-      This value is common to all harts on a single system image.
+  # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
+  timebase-frequency: false
 
   interrupt-controller:
     type: object
@@ -93,7 +91,6 @@ properties:
 
 required:
   - riscv,isa
-  - timebase-frequency
   - interrupt-controller
 
 examples:

Documentation/networking/device_drivers/pensando/ionic.rst

@@ -36,8 +36,10 @@ Support
 =======
 For general Linux networking support, please use the netdev mailing
 list, which is monitored by Pensando personnel::
+
   [email protected]
 
 For more specific support needs, please use the Pensando driver support
 email::
-	[email protected]
+
+  [email protected]

Documentation/networking/net_dim.txt

@@ -92,16 +92,16 @@ under some conditions.
 Part III: Registering a Network Device to DIM
 ==============================================
 
-Net DIM API exposes the main function net_dim(struct net_dim *dim,
-struct net_dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim(struct dim *dim,
+struct dim_sample end_sample). This function is the entry point to the Net
 DIM algorithm and has to be called every time the driver would like to check if
 it should change interrupt moderation parameters. The driver should provide two
-data structures: struct net_dim and struct net_dim_sample. Struct net_dim
+data structures: struct dim and struct dim_sample. Struct dim
 describes the state of DIM for a specific object (RX queue, TX queue,
 other queues, etc.). This includes the current selected profile, previous data
 samples, the callback function provided by the driver and more.
-Struct net_dim_sample describes a data sample, which will be compared to the
-data sample stored in struct net_dim in order to decide on the algorithm's next
+Struct dim_sample describes a data sample, which will be compared to the
+data sample stored in struct dim in order to decide on the algorithm's next
 step. The sample should include bytes, packets and interrupts, measured by
 the driver.
 
@@ -110,9 +110,9 @@ main net_dim() function. The recommended method is to call net_dim() on each
 interrupt. Since Net DIM has a built-in moderation and it might decide to skip
 iterations under certain conditions, there is no need to moderate the net_dim()
 calls as well. As mentioned above, the driver needs to provide an object of type
-struct net_dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct net_dim as part of its data structure and use it
-as the main Net DIM API object. The struct net_dim_sample should hold the latest
+struct dim to the net_dim() function call. It is advised for each entity
+using Net DIM to hold a struct dim as part of its data structure and use it
+as the main Net DIM API object. The struct dim_sample should hold the latest
 bytes, packets and interrupts count. No need to perform any calculations, just
 include the raw data.
 
@@ -132,33 +132,33 @@ usage is not complete but it should make the outline of the usage clear.
 
 my_driver.c:
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* Callback for net DIM to schedule on a decision to change moderation */
 void my_driver_do_dim_work(struct work_struct *work)
 {
-	/* Get struct net_dim from struct work_struct */
-	struct net_dim *dim = container_of(work, struct net_dim,
-					   work);
+	/* Get struct dim from struct work_struct */
+	struct dim *dim = container_of(work, struct dim,
+				       work);
 	/* Do interrupt moderation related stuff */
 	...
 
 	/* Signal net DIM work is done and it should move to next iteration */
-	dim->state = NET_DIM_START_MEASURE;
+	dim->state = DIM_START_MEASURE;
 }
 
 /* My driver's interrupt handler */
 int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
 {
 	...
 	/* A struct to hold current measured data */
-	struct net_dim_sample dim_sample;
+	struct dim_sample dim_sample;
 	...
 	/* Initiate data sample struct with current data */
-	net_dim_sample(my_entity->events,
-		       my_entity->packets,
-		       my_entity->bytes,
-		       &dim_sample);
+	dim_update_sample(my_entity->events,
+		          my_entity->packets,
+		          my_entity->bytes,
+		          &dim_sample);
 	/* Call net DIM */
 	net_dim(&my_entity->dim, dim_sample);
 	...