Merge tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/…

…linux/kernel/git/groeck/linux-staging

Pull watchdog updates from Guenter Roeck:
 "Wim asked me to handle the watchdog pull request this time around.

  Key changes:

   - New drivers: Cortina Gemini, ZTE's zx2967 family, NIC7018

   - Convert to use device managed functions: ebc-c384_wdt, tegra_wdt,
     da9063_wdt, da9062_wdt, da9055_wdt, da9052_wdt, bcm2835_wdt,
     mena21_wdt, wm831x_wdt, digicolor_wdt, intel-mid_wdt, meson_wdt,
     sunxi_wdt, aspeed_wdt, coh901327_wdt, iTCO_wdt

   - Use watchdog core to install restart handler: tangox, dw_wdt,
     bcm2835_wdt, asm9260_wdt, bcm47xx_wdt

   - Convert ts72xx_wdt driver to watchdog core

   - Let core handle heartbeat in ep93xx_wdt driver

   - Enable COMPILE_TEST where possible

   - Various other improvements"

* tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
  watchdog: s3c2410: Add prefix to local function
  watchdog: s3c2410: Select MFD_SYSCON on all Exynos platforms
  watchdog: s3c2410: Use dev_dbg instead of pr_info
  watchdog: s3c2410: Fix infinite interrupt in soft mode
  watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
  watchdog: softdog: make pretimeout support a compile option
  watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family watchdog controller
  watchdog: sama5d4: Implement resume hook
  watchdog: sama5d4: Cache MR instead of a partial config
  watchdog: ts72xx_wdt: convert driver to watchdog core
  watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat
  watchdog: RDC321X_WDT always depends on PCI
  watchdog: add driver for Cortina Gemini watchdog
  watchdog: add DT bindings for Cortina Gemini
  watchdog: constify watchdog_ops structures
  watchdog: Introduce watchdog_stop_on_unregister helper
  watchdog: ebc-c384_wdt: Utilize devm_ functions in driver probe callback
  watchdog: tegra_wdt: Convert to use device managed functions
  watchdog: da9063_wdt: Convert to use device managed functions
  ...

Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt

@@ -0,0 +1,17 @@
+Cortina Systems Gemini SoC Watchdog
+
+Required properties:
+- compatible : must be "cortina,gemini-watchdog"
+- reg : shall contain base register location and length
+- interrupts : shall contain the interrupt for the watchdog
+
+Optional properties:
+- timeout-sec : the default watchdog timeout in seconds.
+
+Example:
+
+watchdog@41000000 {
+	compatible = "cortina,gemini-watchdog";
+	reg = <0x41000000 0x1000>;
+	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};

Documentation/devicetree/bindings/watchdog/samsung-wdt.txt

@@ -6,10 +6,11 @@ occurred.
 
 Required properties:
 - compatible : should be one among the following
-	(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
-	(b) "samsung,exynos5250-wdt" for Exynos5250
-	(c) "samsung,exynos5420-wdt" for Exynos5420
-	(c) "samsung,exynos7-wdt" for Exynos7
+	- "samsung,s3c2410-wdt" for S3C2410
+	- "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4
+	- "samsung,exynos5250-wdt" for Exynos5250
+	- "samsung,exynos5420-wdt" for Exynos5420
+	- "samsung,exynos7-wdt" for Exynos7
 
 - reg : base physical address of the controller and length of memory mapped
 	region.

Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt

@@ -0,0 +1,32 @@
+ZTE zx2967 Watchdog timer
+
+Required properties:
+
+- compatible : should be one of the following.
+       * zte,zx296718-wdt
+- reg : Specifies base physical address and size of the registers.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- resets : Reference to the reset controller controlling the watchdog
+           controller.
+
+Optional properties:
+
+- timeout-sec : Contains the watchdog timeout in seconds.
+- zte,wdt-reset-sysctrl : Directs how to reset system by the watchdog.
+	if we don't want to restart system when watchdog been triggered,
+	it's not required, vice versa.
+	It should include following fields.
+	  * phandle of aon-sysctrl.
+	  * offset of register that be written, should be 0xb0.
+	  * configure value that be written to aon-sysctrl.
+	  * bit mask, corresponding bits will be affected.
+
+Example:
+
+wdt: watchdog@1465000 {
+	compatible = "zte,zx296718-wdt";
+	reg = <0x1465000 0x1000>;
+	clocks = <&topcrm WDT_WCLK>;
+	resets = <&toprst 35>;
+	zte,wdt-reset-sysctrl = <&aon_sysctrl 0xb0 1 0x115>;
+};

Documentation/watchdog/watchdog-kernel-api.txt

@@ -280,6 +280,12 @@ To disable the watchdog on reboot, the user must call the following helper:
 
 static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd);
 
+To disable the watchdog when unregistering the watchdog, the user must call
+the following helper. Note that this will only stop the watchdog if the
+nowayout flag is not set.
+
+static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd);
+
 To change the priority of the restart handler the following helper should be
 used:
 

Documentation/watchdog/watchdog-parameters.txt

@@ -209,6 +209,11 @@ timeout: Initial watchdog timeout in seconds (0<timeout<516, default=60)
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+nic7018_wdt:
+timeout: Initial watchdog timeout in seconds (0<timeout<464, default=80)
+nowayout: Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+-------------------------------------------------
 nuc900_wdt:
 heartbeat: Watchdog heartbeats in seconds.
 	(default = 15)