Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -1,6 +1,18 @@
 Amlogic MesonX device tree bindings
 -------------------------------------------
 
+Work in progress statement:
+
+Device tree files and bindings applying to Amlogic SoCs and boards are
+considered "unstable". Any Amlogic device tree binding may change at
+any time. Be sure to use a device tree binary and a kernel image
+generated from the same source tree.
+
+Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+stable binding/ABI.
+
+---------------------------------------------------------------
+
 Boards with the Amlogic Meson6 SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,meson6"

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -42,6 +42,10 @@ Raspberry Pi Zero
 Required root node properties:
 compatible = "raspberrypi,model-zero", "brcm,bcm2835";
 
+Raspberry Pi Zero W
+Required root node properties:
+compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+
 Generic BCM2835 board
 Required root node properties:
 compatible = "brcm,bcm2835";

Documentation/devicetree/bindings/arm/bhf.txt

@@ -0,0 +1,6 @@
+Beckhoff Automation Platforms Device Tree Bindings
+--------------------------------------------------
+
+CX9020 Embedded PC
+Required root node properties:
+    - compatible = "bhf,cx9020", "fsl,imx53";

Documentation/devicetree/bindings/arm/cpus.txt

@@ -200,6 +200,7 @@ described below.
 			    "arm,realview-smp"
 			    "brcm,bcm11351-cpu-method"
 			    "brcm,bcm23550"
+			    "brcm,bcm2836-smp"
 			    "brcm,bcm-nsp-smp"
 			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"

Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt

@@ -0,0 +1,15 @@
+Marvell Armada 8KPlus Platforms Device Tree Bindings
+----------------------------------------------------
+
+Boards using a SoC of the Marvell Armada 8KP families must carry
+the following root node property:
+
+ - compatible, with one of the following values:
+
+   - "marvell,armada-8080", "marvell,armada-ap810-octa", "marvell,armada-ap810"
+     when the SoC being used is the Armada 8080
+
+Example:
+
+compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+	     "marvell,armada-ap810-octa", "marvell,armada-ap810"

Documentation/devicetree/bindings/arm/mediatek.txt

@@ -1,20 +1,21 @@
-MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
+MediaTek SoC based Platforms Device Tree Bindings
 
-Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
-following property:
+Boards with a MediaTek SoC shall have the following property:
 
 Required root node property:
 
 compatible: Must contain one of
    "mediatek,mt2701"
+   "mediatek,mt2712"
    "mediatek,mt6580"
    "mediatek,mt6589"
    "mediatek,mt6592"
    "mediatek,mt6755"
    "mediatek,mt6795"
    "mediatek,mt6797"
    "mediatek,mt7622"
-   "mediatek,mt7623"
+   "mediatek,mt7623" which is referred to MT7623N SoC
+   "mediatek,mt7623a"
    "mediatek,mt8127"
    "mediatek,mt8135"
    "mediatek,mt8173"
@@ -25,6 +26,9 @@ Supported boards:
 - Evaluation board for MT2701:
     Required root node properties:
       - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+- Evaluation board for MT2712:
+    Required root node properties:
+      - compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
 - Evaluation board for MT6580:
     Required root node properties:
       - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
@@ -46,9 +50,11 @@ Supported boards:
 - Reference board variant 1 for MT7622:
     Required root node properties:
       - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Evaluation board for MT7623:
+- Reference  board for MT7623n with NAND:
     Required root node properties:
-      - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+- Bananapi BPI-R2 board:
+      - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
 - MTK mt8127 tablet moose EVB:
     Required root node properties:
       - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -157,6 +157,9 @@ Boards:
 - AM335X phyCORE-AM335x: Development kit
   compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"
 
+- AM335X UC-8100-ME-T: Communication-centric industrial computing platform
+  compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
@@ -187,6 +190,9 @@ Boards:
 - AM5718 IDK
   compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"
 
+- DRA762 EVM:  Software Development Board for DRA762
+  compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 

Documentation/devicetree/bindings/arm/qcom.txt

@@ -25,6 +25,7 @@ The 'SoC' element must be one of the following strings:
 	msm8994
 	msm8996
 	mdm9615
+	ipq8074
 
 The 'board' element must be one of the following strings:
 
@@ -33,6 +34,7 @@ The 'board' element must be one of the following strings:
 	dragonboard
 	mtp
 	sbc
+	hk01
 
 The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
 where the minor number may be omitted when it's zero, i.e.  v1.0 is the same

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -134,6 +134,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
      - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
 
+- Pine64 Rock64 board:
+    Required root node properties:
+    - compatible = "pine64,rock64", "rockchip,rk3328";
+
 - Rockchip PX3 Evaluation board:
     Required root node properties:
       - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
@@ -173,6 +177,14 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
+- Rockchip RK3399 Sapphire Excavator board:
+    Required root node properties:
+      - compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
+
+- Theobroma Systems RK3399-Q7 Haikou Baseboard:
+    Required root node properties:
+      - compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399";
+
 - Tronsmart Orion R68 Meta
     Required root node properties:
       - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -39,6 +39,8 @@ SoCs:
     compatible = "renesas,r8a7795"
   - R-Car M3-W (R8A77960)
     compatible = "renesas,r8a7796"
+  - R-Car D3 (R8A77995)
+    compatible = "renesas,r8a77995"
 
 
 Boards:
@@ -53,6 +55,8 @@ Boards:
     compatible = "renesas,blanche", "renesas,r8a7792"
   - BOCK-W
     compatible = "renesas,bockw", "renesas,r8a7778"
+  - Draak (RTP0RC77995SEB0010S)
+    compatible = "renesas,draak", "renesas,r8a77995"
   - Genmai (RTK772100BC00000BR)
     compatible = "renesas,genmai", "renesas,r7s72100"
   - GR-Peach (X28A-M01-E/F)
@@ -64,6 +68,10 @@ Boards:
     compatible = "renesas,h3ulcb", "renesas,r8a7795";
   - Henninger
     compatible = "renesas,henninger", "renesas,r8a7791"
+  - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
+    compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"
+  - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
+    compatible = "iwave,g22m", "renesas,r8a7745"
   - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
     compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
   - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)

Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt

@@ -16,18 +16,25 @@ Required Properties:
 	   mapped region.
 
 - #clock-cells: should be 1.
+- #reset-cells: should be 1.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
 preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
 used in device tree sources.
 
+Similarly a preprocessor macro for each reset line is defined in
+dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
+device tree sources).
+
+
 Example: Clock controller node:
 
 	clkc: clock-controller@c1104000 {
-		#clock-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
 		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 

Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt

@@ -13,6 +13,7 @@ Required properties:
 
 - compatible : Shall contain one or more of
   - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
+  - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
   - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
 
     When compatible with generic versions, nodes must list the SoC-specific

Documentation/devicetree/bindings/display/renesas,du.txt

@@ -36,8 +36,10 @@ Required Properties:
       When supplied they must be named "dclkin.x" with "x" being the input
       clock numerical index.
 
-  - vsps: A list of phandles to the VSP nodes that handle the memory
-    interfaces for the DU channels.
+  - vsps: A list of phandle and channel index tuples to the VSPs that handle
+    the memory interfaces for the DU channels. The phandle identifies the VSP
+    instance that serves the DU channel, and the channel index identifies the
+    LIF instance in that VSP.
 
 Required nodes:
 
@@ -59,24 +61,24 @@ corresponding to each DU output.
  R8A7796 (M3-W)	DPAD		HDMI		LVDS		-
 
 
-Example: R8A7790 (R-Car H2) DU
+Example: R8A7795 (R-Car H3) ES2.0 DU
 
-	du: du@feb00000 {
-		compatible = "renesas,du-r8a7790";
-		reg = <0 0xfeb00000 0 0x70000>,
-		      <0 0xfeb90000 0 0x1c>,
-		      <0 0xfeb94000 0 0x1c>;
-		reg-names = "du", "lvds.0", "lvds.1";
-		interrupt-parent = <&gic>;
-		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
-		         <&mstp7_clks R8A7790_CLK_DU1>,
-		         <&mstp7_clks R8A7790_CLK_DU2>,
-		         <&mstp7_clks R8A7790_CLK_LVDS0>,
-		         <&mstp7_clks R8A7790_CLK_LVDS1>;
-		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7795";
+		reg = <0 0xfeb00000 0 0x80000>,
+		      <0 0xfeb90000 0 0x14>;
+		reg-names = "du", "lvds.0";
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 724>,
+			 <&cpg CPG_MOD 723>,
+			 <&cpg CPG_MOD 722>,
+			 <&cpg CPG_MOD 721>,
+			 <&cpg CPG_MOD 727>;
+		clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+		vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
 
 		ports {
 			#address-cells = <1>;
@@ -89,12 +91,19 @@ Example: R8A7790 (R-Car H2) DU
 			};
 			port@1 {
 				reg = <1>;
-				du_out_lvds0: endpoint {
+				du_out_hdmi0: endpoint {
+					remote-endpoint = <&dw_hdmi0_in>;
 				};
 			};
 			port@2 {
 				reg = <2>;
-				du_out_lvds1: endpoint {
+				du_out_hdmi1: endpoint {
+					remote-endpoint = <&dw_hdmi1_in>;
+				};
+			};
+			port@3 {
+				reg = <3>;
+				du_out_lvds0: endpoint {
 				};
 			};
 		};