Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
    Khee)

  - make host bridge IRQ mapping much more generic (Matthew Minter,
    Lorenzo Pieralisi)

  - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
    Pieralisi)

  - mutex sriov_configure() (Jakub Kicinski)

  - mutex pci_error_handlers callbacks (Christoph Hellwig)

  - split ->reset_notify() into ->reset_prepare()/reset_done()
    (Christoph Hellwig)

  - support multiple PCIe portdrv interrupts for MSI as well as MSI-X
    (Gabriele Paoloni)

  - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
    Paoloni)

  - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)

  - test INTx masking during enumeration, not at run-time (Piotr Gregor)

  - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)

  - restore the status of PCI devices across hibernation (Chen Yu)

  - keep parent resources that start at 0x0 (Ard Biesheuvel)

  - enable ECRC only if device supports it (Bjorn Helgaas)

  - restore PRI and PASID state after Function-Level Reset (CQ Tang)

  - skip DPC event if device is not present (Keith Busch)

  - check domain when matching SMBIOS info (Sujith Pandel)

  - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)

  - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)

  - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)

  - add Switchtec "running" status flag (Logan Gunthorpe)

  - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)

  - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
    Gogada)

  - move VMD SRCU cleanup after bus, child device removal (Jon Derrick)

  - add Faraday clock handling (Linus Walleij)

  - configure Rockchip MPS and reorganize (Shawn Lin)

  - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)

  - support Tegra MSI 64-bit addressing (Thierry Reding)

  - use Rockchip normal (not privileged) register bank (Shawn Lin)

  - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)

  - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
    Gonzalez)

  - add MediaTek PCIe host controller support (Ryder Lee)

  - add Qualcomm IPQ4019 support (John Crispin)

  - add HyperV vPCI protocol v1.2 support (Jork Loeser)

  - add i.MX6 regulator support (Quentin Schulz)

* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller
  PCI: rockchip: Use normal register bank for config accessors
  dt-bindings: PCI: Add documentation for MediaTek PCIe
  PCI: Remove __pci_dev_reset() and pci_dev_reset()
  PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
  PCI: vmd: Move SRCU cleanup after bus, child device removal
  PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
  PCI: versatile: Add local struct device pointers
  PCI: tegra: Do not allocate MSI target memory
  PCI: tegra: Support MSI 64-bit addressing
  PCI: rockchip: Use local struct device pointer consistently
  PCI: rockchip: Check for clk_prepare_enable() errors during resume
  MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
  PCI: rockchip: Configure RC's MPS setting
  PCI: rockchip: Reconfigure configuration space header type
  PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
  PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
  ...

Documentation/devicetree/bindings/pci/faraday,ftpci100.txt

@@ -30,6 +30,13 @@ Mandatory properties:
   128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
   pre-fetchable.
 
+Optional properties:
+- clocks: when present, this should contain the peripheral clock (PCLK) and the
+  PCI clock (PCICLK). If these are not present, they are assumed to be
+  hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+- clock-names: when present, this should contain "PCLK" for the peripheral
+  clock and "PCICLK" for the PCI-side clock.
+
 Mandatory subnodes:
 - For "faraday,ftpci100" a node representing the interrupt-controller inside the
   host bridge is mandatory. It has the following mandatory properties:

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -33,6 +33,10 @@ Optional properties:
 - reset-gpio-active-high: If present then the reset sequence using the GPIO
   specified in the "reset-gpio" property is reversed (H=reset state,
   L=operation state).
+- vpcie-supply: Should specify the regulator in charge of PCIe port power.
+  The regulator will be enabled when initializing the PCIe host and
+  disabled either as part of the init process or when shutting down the
+  host.
 
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:

Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt

@@ -0,0 +1,130 @@
+MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs
+
+PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root
+ports supports a Gen2 1-lane Link and has PIPE interface to PHY.
+
+Required properties:
+- compatible: Should contain "mediatek,mt7623-pcie".
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the PCIe controller.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - free_ck :for reference clock of PCIe subsys
+  - sys_ck0 :for clock of Port0
+  - sys_ck1 :for clock of Port1
+  - sys_ck2 :for clock of Port2
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pcie-rst0 :port0 reset
+  - pcie-rst1 :port1 reset
+  - pcie-rst2 :port2 reset
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+  number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+  which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+  and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+- num-lanes: Number of lanes to use for this port.
+
+Examples:
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie-controller@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+
+		pcie@0,0 {
+			device_type = "pci";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+
+		pcie@1,0 {
+			device_type = "pci";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+
+		pcie@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+	};

Documentation/devicetree/bindings/pci/qcom,pcie.txt

@@ -8,6 +8,7 @@
 			- "qcom,pcie-apq8064" for apq8064
 			- "qcom,pcie-apq8084" for apq8084
 			- "qcom,pcie-msm8996" for msm8996 or apq8096
+			- "qcom,pcie-ipq4019" for ipq4019
 
 - reg:
 	Usage: required
@@ -87,7 +88,7 @@
 			- "core"	Clocks the pcie hw block
 			- "phy"		Clocks the pcie PHY block
 - clock-names:
-	Usage: required for apq8084
+	Usage: required for apq8084/ipq4019
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "aux"		Auxiliary (AUX) clock
@@ -126,6 +127,23 @@
 	Definition: Should contain the following entries
 			- "core" Core reset
 
+- reset-names:
+	Usage: required for ipq/apq8064
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "axi_m"		AXI master reset
+			- "axi_s"		AXI slave reset
+			- "pipe"		PIPE reset
+			- "axi_m_vmid"		VMID reset
+			- "axi_s_xpu"		XPU reset
+			- "parf"		PARF reset
+			- "phy"			PHY reset
+			- "axi_m_sticky"	AXI sticky reset
+			- "pipe_sticky"		PIPE sticky reset
+			- "pwr"			PWR reset
+			- "ahb"			AHB reset
+			- "phy_ahb"		PHY AHB reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>

Documentation/devicetree/bindings/pci/rcar-pci.txt

@@ -1,4 +1,4 @@
-* Renesas RCar PCIe interface
+* Renesas R-Car PCIe interface
 
 Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;

Documentation/devicetree/bindings/pci/tango-pcie.txt

@@ -0,0 +1,29 @@
+Sigma Designs Tango PCIe controller
+
+Required properties:
+
+- compatible: "sigma,smp8759-pcie"
+- reg: address/size of PCI configuration space, address/size of register area
+- bus-range: defined by size of PCI configuration space
+- device_type: "pci"
+- #size-cells: <2>
+- #address-cells: <3>
+- msi-controller
+- ranges: translation from system to bus addresses
+- interrupts: spec for misc interrupts, spec for MSI
+
+Example:
+
+	pcie@2e000 {
+		compatible = "sigma,smp8759-pcie";
+		reg = <0x50000000 0x400000>, <0x2e000 0x100>;
+		bus-range = <0 3>;
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		msi-controller;
+		ranges = <0x02000000 0x0 0x00400000  0x50400000  0x0 0x3c00000>;
+		interrupts =
+			<54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */
+			<55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */
+	};

Documentation/driver-model/devres.txt

@@ -348,6 +348,7 @@ PER-CPU MEM
   devm_free_percpu()
 
 PCI
+  devm_pci_alloc_host_bridge()  : managed PCI host bridge allocation
   devm_pci_remap_cfgspace()	: ioremap PCI configuration space
   devm_pci_remap_cfg_resource()	: ioremap PCI configuration space resource
   pcim_enable_device()		: after success, all PCI ops become managed

MAINTAINERS

@@ -10160,9 +10160,16 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
 F:	drivers/pci/dwc/pcie-hisi.c
 
+PCIE DRIVER FOR HISILICON KIRIN
+M:	Xiaowei Song <[email protected]>
+M:	Binghui Wang <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/pcie-kirin.txt
+F:	drivers/pci/dwc/pcie-kirin.c
+
 PCIE DRIVER FOR ROCKCHIP
 M:	Shawn Lin <[email protected]>
-M:	Wenrui Li <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Maintained
@@ -10184,6 +10191,14 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/pci-thunder-*
 F:	drivers/pci/host/pci-thunder-*
 
+PCIE DRIVER FOR MEDIATEK
+M:      Ryder Lee <[email protected]>
+L:      [email protected]
+L:      [email protected]
+S:      Supported
+F:      Documentation/devicetree/bindings/pci/mediatek*
+F:      drivers/pci/host/*mediatek*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	[email protected]

arch/arm/include/asm/mach/pci.h

@@ -16,6 +16,7 @@
 struct pci_sys_data;
 struct pci_ops;
 struct pci_bus;
+struct pci_host_bridge;
 struct device;
 
 struct hw_pci {
@@ -25,7 +26,7 @@ struct hw_pci {
 	unsigned int	io_optional:1;
 	void		**private_data;
 	int		(*setup)(int nr, struct pci_sys_data *);
-	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+	int		(*scan)(int nr, struct pci_host_bridge *);
 	void		(*preinit)(void);
 	void		(*postinit)(void);
 	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);

arch/arm/kernel/bios32.c

@@ -458,10 +458,14 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 	int nr, busnr;
 
 	for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
-		sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
-		if (WARN(!sys, "PCI: unable to allocate sys data!"))
+		struct pci_host_bridge *bridge;
+
+		bridge = pci_alloc_host_bridge(sizeof(struct pci_sys_data));
+		if (WARN(!bridge, "PCI: unable to allocate bridge!"))
 			break;
 
+		sys = pci_host_bridge_priv(bridge);
+
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
@@ -473,34 +477,44 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		ret = hw->setup(nr, sys);
 
 		if (ret > 0) {
-			struct pci_host_bridge *host_bridge;
 
 			ret = pcibios_init_resource(nr, sys, hw->io_optional);
 			if (ret)  {
 				kfree(sys);
 				break;
 			}
 
+			bridge->map_irq = pcibios_map_irq;
+			bridge->swizzle_irq = pcibios_swizzle;
+
 			if (hw->scan)
-				sys->bus = hw->scan(nr, sys);
-			else
-				sys->bus = pci_scan_root_bus_msi(parent,
-					sys->busnr, hw->ops, sys,
-					&sys->resources, hw->msi_ctrl);
+				ret = hw->scan(nr, bridge);
+			else {
+				list_splice_init(&sys->resources,
+						 &bridge->windows);
+				bridge->dev.parent = parent;
+				bridge->sysdata = sys;
+				bridge->busnr = sys->busnr;
+				bridge->ops = hw->ops;
+				bridge->msi = hw->msi_ctrl;
+				bridge->align_resource =
+						hw->align_resource;
+
+				ret = pci_scan_root_bus_bridge(bridge);
+			}
 
-			if (WARN(!sys->bus, "PCI: unable to scan bus!")) {
-				kfree(sys);
+			if (WARN(ret < 0, "PCI: unable to scan bus!")) {
+				pci_free_host_bridge(bridge);
 				break;
 			}
 
+			sys->bus = bridge->bus;
+
 			busnr = sys->bus->busn_res.end + 1;
 
 			list_add(&sys->node, head);
-
-			host_bridge = pci_find_host_bridge(sys->bus);
-			host_bridge->align_resource = hw->align_resource;
 		} else {
-			kfree(sys);
+			pci_free_host_bridge(bridge);
 			if (ret < 0)
 				break;
 		}
@@ -519,8 +533,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
 	if (hw->postinit)
 		hw->postinit();
 
-	pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
-
 	list_for_each_entry(sys, &head, node) {
 		struct pci_bus *bus = sys->bus;