A Full-Featured Cardano Development Suite

Features
Installation
- Requirements
- Install Nix
- Configure nix.conf
- Create your repository
- Clone repository & test readiness
- Build environment & set up project
- Start coding
Using the jamb CLI
Writing contracts
- Creating a contract
  - Writing emulator tests
  - Using the jamb CLI
- Using GHCi
- Serving plutus-apps docs
Updating Jambhala
Updating Plutus dependencies
Troubleshooting

Features

Jambhala brings Cardano development nirvana by presenting five jewels:

💎 #1: Painless installation of Cardano tooling

Only git, and nix are required to get started.
Jambhala's Readiness Test confirms system readiness before proceeding with installation, preventing wastage of time and resources on failed builds.
Jambhala's setup wizard handles everything else, including easy installation of cardano-node and cardano-cli using Cardano EZ-Installer.
plutus-apps is installed internally to your project, so you don't need to maintain a central clone and use its associated Nix shell as the entry point for your projects (See Jewel #4 below).
A preconfigured VS Codium editor is included, allowing you to start coding immediately (you can still use your editor of choice if preferred).

💎 #2: Minimize contract boilerplate

Jambhala uses a custom Prelude module which includes both the PlutusTx.Prelude and common Haskell items .
- No need to use NoImplicitPrelude pragma, manually import PlutusTx.Prelude and Haskell's prelude
- No need to use hiding clauses or qualified imports to avoid nameclashes: PlutusTx versions of functions that clash with their Haskell counterparts are prefixed with p (for prefix functions) and # (for infix operators)
The amount of required language extensions for Plutus development are significantly reduced, and commonly required extensions are enabled by default.
Common Plutustypes and functions are re-exported from their respective modules by Jambhala.Plutus, so you don't need to keep track of messy import boilerplate. You can always import Plutus modules explicitly if you prefer.
Jambhala.Utils provides common utility functions to avoid contract clutter.

💎 #3: Perform common cardano-cli and Plutus tasks with simple commands

Jambhala includes Cardano CLI Guru, which provides utility scripts for common cardano-cli tasks that can be run as terminal commands.
A Haskell-based executable CLI called jamb lets you easily perform common tasks with your Plutus contracts, including:
- Computing validator hashes and script addresses
- Running emulator tests
- Serializing contracts and their associated input data to JSON files

💎 #4: Keep projects in sync with plutus-apps

Jhambala uses haskell.nix to provide a fully self-reliant Plutus development environment for each of your projects, which can be brought up to date with the current state of plutus-apps using a single command.
No wrangling of dependency boilerplate: just build your project environment and get to work, then bump plutus-apps for a specific project whenever you like.
Serve Haddock documentation for the specific plutus-apps revision your project uses with the serve-docs command.

💎 #5: Learn from a wealth of high-quality tutorials and samples

Cardano CLI Guru provides a series of easy-to-follow cardano-cli tutorials that teach you how to build increasingly complex transactions and native scripts.
Numerous sample contracts are included to help you learn Plutus quickly.
Jambhalucid provides an example frontend user interface for sample contracts built with Next.js, TypeScript and Lucid/use-cardano (UNDER CONSTRUCTION).

Installation

0. Requirements

This project uses the Nix package manager to build a fully-functioning and reproducible Cardano development environment.
Nix is only compatible with Unix-like operating systems, so you must be using a Linux distribution, MacOS, or WSL2 (Windows Subsystem for Linux) to install Jambhala.
Your system must have bash and git installed. Run bash --version and git -v in a terminal window to confirm.
- NOTE for MacOS users: MacOS may ship with versions of bash and grep that are incompatible with this workflow. You should install bash/grep using Homebrew first before proceeding.
This project assumes the use of VS Codium (a preconfigured installation is provided) or VS Code as editor and bash as shell (also provided in the Nix development environment). Other tools will require alternative workflows that are not covered here.
Jambhala and cardano-node are storage-intensive. We suggest you have at least 50GB of free disk space before proceeding further.

1. Install `nix`

If you're setting up Nix on your system for the first time, try Determinate Systems' Zero-to-Nix in lieu of the official installer, as it provides an easier tool for installing and uninstalling Nix.
Alternatively, you may follow the instructions for multi-user installation for your OS at nixos.org. This approach will require some additional configuration and it will be harder to uninstall Nix should you need to. It is only recommended if you've previously installed Nix on your system, as it will detect and repair a previous installation as needed.
When you are finished installing Nix, close the terminal session and open a fresh one.

2. Configure `nix.conf`

Edit /etc/nix/nix.conf: this requires root access to edit. Use a terminal-based editor like nano (i.e.):
```
sudo nano /etc/nix/nix.conf
```

Modify the file following the instructions below:

# Sample /etc/nix/nix.conf

# Step 2a: Add this line to enable Flakes if missing (if you used the Zero-to-Nix installer this should already be added)
experimental-features = nix-command flakes

# Step 2b: Add your username to trusted-users (also include 'root' to prevent overriding default setting)
trusted-users = root your-username

# Step 2c: Avoid unwanted garbage collection with nix-direnv
keep-outputs = true

Mac users with Apple silicon hardware (M1/M2 chip) also need to add the following, as plutus-apps currently doesn't build successfully on aarch64 architecture:
```
# Step 2d: Adjust system and platforms for aarch64 compatibility:
system = x86_64-darwin
extra-platforms = x86_64-darwin aarch64-darwin
```

🚨 IMPORTANT! You must restart the nix-daemon to apply the changes

Linux:

sudo systemctl restart nix-daemon

MacOS:

sudo launchctl stop org.nixos.nix-daemon
sudo launchctl start org.nixos.nix-daemon

3. Create your repository

There are two "modes" you can choose from to use Jambhala, depending on your use case:

Learning Mode

Learning Mode is recommended if you are currently learning Cardano/Plutus or just experimenting with Jambhala, as opposed to developing a full-fledged project.

Jambhala is under active development, with new features and learning materials being added on a continuous basis. To take advantage of the latest additions, it's better to work inside a fork of the repository. Your fork will maintain a historical link with the source repository upstream, which makes it easier to fetch and merge upstream changes into your local Jambhala setup (see Updating Jambhala for instructions).

Cons:

Github only allows one fork of a repository at a time
Contributions to a fork aren't reflected in your activity on Github

For these reasons, Learning Mode isn't well-suited for developing your own projects using Jambhala.

To use Jambhala in Learning Mode, just click the Fork button at the top of this repository's page on Github to create your fork. Then proceed to Step 4.

Development Mode

Development Mode allows you to generate a completely independent repository, which can be personalized for your project. You can generate as many repositories from the template as you like, and your contributions to them will be reflected in your Github activity.

Cons:

Generating from a Github template creates a new repository with no historical link to the upstream template.
This makes it more difficult to incorporate updates to Jambhala released after your repository is generated.

It's still possible to update Jambhala in Development Mode, although it requires more manual labor to resolve merge conflicts (see Updating Jambhala for instructions).

To use Jambhala in Development Mode, select the green Use this template button on this repository's Github page, and select Create a new repository to generate a new repository from the Jambhala template.

4. Clone repository & test readiness

Clone your new repository in a terminal session:

git clone https://github.com/PATH-TO/YOUR-REPO.git --recurse-submodules

Note: Jambhala uses git submodules to incorporate companion projects (like Cardano EZ-Installer, Cardano CLI Guru, and Jambhalucid). These projects are maintained as separate repositories. To include them when you clone your fork, you must use the --recurse-submodules flag.

Before proceeding to Step 5, navigate to your project directory in a terminal window and run the Jambhala Readiness Test to confirm whether your system is ready to install the Jambhala environment:

./ready?

The script will prepare your system to use Jambhala and check for any issues with your Nix configuration.

Installing `direnv`

Jambhala uses the direnv utility to provide seamless loading of the Nix environment whenever you navigate into the project directory tree. The Readiness Test will prompt you to install direnv using Nix and configure it to work with your shell if you don't already have a compatible version installed and configured.

Installing `direnv` manually

Jambhala requires direnv version >= 2.30, which may not be available in the packaging systems for certain older operating systems (for instance, any Ubuntu system below version 22.10). For convenience, the Readiness Test allows you to install a compatible version using Nix.

While not recommended, if you prefer to install direnv through a different method you may do the following:

Visit the direnv installation page and check which version is available for your OS in the Packaging status section. If direnv version 2.30 or higher is available for your machine, follow the instructions to install it. Otherwise use the Readiness Test to install a compatible version using Nix.
The final step is to hook direnv into your shell. Running the Readiness Test (./ready?) will complete this step for you, but if you prefer to do it manually you can follow the instructions for your preferred shell here.

Note: MacOS has two types of shell sessions: login and interactive. If using login sessions, you'll need to add the appropriate hook to your .zprofile or .bash_profile file (depending on which shell you use). .zshrc and .bashrc are used for interactive sessions. For convenience, the Readiness Test adds hooks to all four of these files for Mac users.

After the ./ready? script completes, correct any issues and re-run it until all tests pass.

5. Build environment & set up project

Open a new terminal window and navigate to your project directory:
```
cd path-to-your-project
```
You should now see the following message (if not, return to Step 4 and complete the Readiness Test):
```
direnv: error /home/path-to-your-project/.envrc is blocked. Run `direnv allow` to approve its content
```
This is a security measure, since .envrc files can run arbitrary shell commands. Make sure you always trust the author of a project and inspect the contents of its .envrc file before running direnv allow.

When you're ready, enter direnv allow to approve the content:
```
direnv allow
```
You can ignore the following warning: direnv: ([/nix/store/.../bin/direnv export bash]) is taking a while to execute. Use CTRL-C to give up.

It will take significant time (~2 hours) to set up the environment the first time. You can recite the Yellow Dzambhala Mantra while you wait:

              _=_
            q(-_-)p
            '_) (_`
            /__/  \
          _(<_   / )_
_________(__\_\_|_/__)_________

Om Dzambhala Dzalentraye Svaha!

Some dependencies will need to be built from source, but if you see "building" for certain packages that should be downloadable from a binary cache (particularly GHC) or if you see any warning such as warning: ignoring substitute, this means your system is not configured correctly and Nix is attempting to build packages from source that it should be fetching from a cache. Exit with CTRL + c and repeat Step 4, then try again. Make sure to restart the nix-daemon!
If you see any HTTP-related errors, it means the IOG binary cache is non-responsive. Wait a bit and try again later.
Once the Nix environment build process completes, run jsetup to launch the Jambhala setup wizard:
```
jsetup
```
The setup wizard runs differently depending on whether you're using Jambhala in Learning or Development mode:
- If you created your repository by forking (Learning Mode), the wizard will simply build the project without any personalization.
- If you created your repository by generating from the template (Development Mode), the wizard will provide a series of prompts to personalize your project.
  - Your .cabal and LICENSE files will be customized using your answers to the prompts.
  - The Jambhala README file will be moved to the docs directory, and a new README for your project will be created
The project will then be built using cabal. While seemingly redundant (since the project's dependencies have already been built using Nix), a cabal build is necessary for proper Haskell Language Server support in VS Codium/Code. This step will also take some time to complete:
```
              _=_
            q(-_-)p
            '_) (_`
            /__/  \
          _(<_   / )_
_________(__\_\_|_/__)_________

Om Dzambhala Dzalentraye Svaha!
```
Installing cardano-node & cardano-cli
- Once the project has built, the setup wizard will prompt you to install cardano-node and cardano-cli.
- You'll need a fully-synced cardano-node with cardano-cli to submit example transactions to the blockchain. The setup wizard runs Cardano EZ-Installer to easily install and configure these tools in a single step.
- This installation method also makes it easy to update your node/cli to a new version later.
- If you've already installed cardano-node and cardano-cli through other means, you can also configure your existing installation to work with Jambhala.
- See the Cardano EZ-Installer README for more information.
- A tutorial with guided exercises for learning to use cardano-cli is provided in the cardano-cli-guru/tutorial directory.

6. Start coding

Jambhala's development environment includes a preconfigured instance of VS Codium (a community-driven, freely-licensed distribution of VS Code without Microsoft branding or telemetry). This "Jambhala Editor" comes with all the required extensions for Cardano development already installed via Nix.

Simply use the jcode command from your project's root directory in your terminal to open the Jambhala editor and start coding!

Note: when you open a Haskell (*.hs) file for the first time in your editor, you may see the following popup appear:

  How do you want the extension to manage/discover HLS and the relevant toolchain?

  Manually via PATH   Cancel    Automatically via GHCup

Select Manually via PATH. Our project is using the Haskell tooling installed via Nix in the development environment, not a system-wide installation via GHCup. If you select GHCup the Haskell Language Server (HLS) won't work properly in the editor.

Adding Extensions to Jambhala Editor

Because the Jambhala Editor is installed via Nix, it isn't possible to install additional extensions in the usual manner from within the application. Instead, they can be added to the flake.nix file and installed via Nix when you load the development environment using direnv. To add an extension:

Click the Extensions icon in the left menu panel and look up the extension in the marketplace.
Click on the extension you wish to install and click the gear icon next to the Install button.
Select Copy Extension ID.
Visit https://search.nixos.org/packages?channel=unstable and paste the Extension ID into the search. If a matching result is returned, your extension is available in the nixpkgs repository and can be added to VS Codium.*

Note: in some rare cases, extensions are proprietary and thus aren't compatible with VS Codium (only VS Code).

Open flake.nix and find the following section:

  # flake.nix
    ...
    vscodeExtensions = with pkgs.vscode-extensions; [
      asvetliakov.vscode-neovim
      dracula-theme.theme-dracula
      haskell.haskell
      jnoortheen.nix-ide
      justusadam.language-haskell
      mkhl.direnv
      ms-python.python
      ms-python.vscode-pylance
    ];
    ...

Paste the Extension ID into the list of extensions on a new line and save the changes.
Close VS Codium, and run direnv reload in your terminal (inside your project root directory).
Run the jcode command to relaunch VS Codium. Your extension should now be installed and ready for use.

* If your desired extension isn't available in nixpkgs, it is still possible to add it to flake.nix, but the process is more complex and will not be covered here. You can file an issue to request a particular extension be added if you feel it will be beneficial to Jambhala users, and I will consider adding it to the flake upstream.

Vim Mode

Jambhala's VS Codium editor comes with the neovim extension installed, but it's disabled by default when you load the editor using jcode. If you prefer to use Vim keybindings, you can enable neovim by changing the VIM_MODE environment variable in the .env file:

VIM_MODE=true

Use Jambhala with your own VS Code/VS Codium

While the Jambhala Editor provides the most rapid route to start coding, you can also use Jambhala with your existing VS Code/Codium installation.

Loading the editor from within the Nix environment provides the most reliable experience, as it prevents errors that can be encountered when extensions (particularly the Haskell extension) load before the Nix environment has finished loading via direnv.

Open the project root directory in your terminal and run one of the following, depending on your preferred editor:

code .

or...

codium .

Alternatively, you can simply start VS Code/Codium and use the File > Open Folder... menu option to load your project directory. This method is more convenient, but occasionally results in errors indicating the Haskell extension is unable to determine the project's version of GHC. This is caused by the issue explained above, and may require occasionally reloading the project or require you to Restart Haskell LSP Server from the command palette (CTRL + SHIFT + P). For the best experience, launch your editor from your terminal inside the project directory.

The first time you open the project, you'll be prompted to install some recommended extensions if you don't have them already: haskell, direnv and Nix IDE. Follow the prompt to install these, and close/relaunch your editor before continuing.

Accept any pop-up prompts from the direnv extension when you encounter them.

Using the `jamb` CLI

Jambhala includes a simple command-line utility called jamb, which reduces boilerplate and provides a simple API for the following uses:

Listing Contracts

You can run the following command to view the names of available contracts in your project, for use with other commands:

  jamb -l

Hashing Validators

You can calculate the validator hash for any available contract like this:

jamb -s CONTRACT

where CONTRACT is the name of the contract to hash.

Testing Contracts with Emulator Trace

You can run the emulator test defined for a contract with the following command:

jamb -t CONTRACT

where CONTRACT is the name of the contract to test.

Compiling Contracts to `.plutus` Files

You can run the following command from the workspace terminal to write a contract to a .plutus file:

jamb -w CONTRACT [FILENAME]

where CONTRACT is the name of the contract to compile, and [FILENAME] is an optional file name (the contract name is used as the filename by default if no argument is given). Contracts are saved in the assets directory of the cardano-cli-guru submodule, where they can be used to easily submit transactions via cardano-cli, assisted by the various utility scripts provided by cardano-cli-guru. When the command finishes, you'll get a CONTRACT.plutus file at cardano-cli-guru/assets/scripts/plutus that contains a JSON envelope of the UPLC code:

{
    "type": "PlutusScriptV2",
    "description": "",
    "cborHex": "5907c05907bd0100003232323232323232323..."
}

This file can now be used in on-chain transactions.

Writing Contracts

🚨 Read This First!

Jambhala makes certain opinionated decisions in order to vastly reduce the boilerplate required to write Plutus contracts.

Prelude

Jambhala uses a custom Prelude module which includes both the PlutusTx.Prelude and common Haskell items.
- No need to use NoImplicitPrelude pragma and manually import PlutusTx.Prelude and Haskell's prelude
- No need to use hiding clauses or qualified imports to avoid nameclashes: PlutusTx versions of functions that clash with their Haskell counterparts are prefixed with p (for prefix functions) and # (for infix operators)

Plutus imports

Many common Plutus types and functions are available via a single import from Jambhala.Plutus, which aggregates and re-exports items from the various Plutus modules.
See the sample contracts in src/Contracts/Samples for more examples of handling imports with Jambhala.
You can still import Plutus modules directly if you prefer, or if you need something from a Plutus module that isn't included in Jambhala.Plutus. Qualified or restricted imports may be required if you want to combine both approaches, due to overlapping exports.

Language extensions

The following language extensions are enabled project-wide by Jambhala using the default-extensions setting in the library stanza of the .cabal file:

  default-extensions:
    -- Allows promotion of types to "kinds", enabling more expressive type-level programming (required for all Plutus contracts):
      DataKinds

    -- Allows automatic derivation of certain typeclasses (like FromJSON/ToJSON):
    , DeriveAnyClass
    , DeriveGeneric

    -- Allows defining typeclass instances for type synonyms:
    , FlexibleInstances

    -- Allows post-fix style qualified import declarations
    , ImportQualifiedPost

    -- Allows writing type signatures for methods in typeclass instances:
    , InstanceSigs
    
    -- A syntactic convenience for writing single-argument lambdas containing case expressions (used by Jambhala's utilities):
    , LambdaCase

    -- Allows more than one type parameter in class and instance declarations (required to lift parameters in parameterized validators):
    , MultiParamTypeClasses

    -- Allows more readable representations of large integers (i.e. 1_000_000), useful for lovelace quantities
    , NumericUnderscores

    -- Allows construction of Text and other string-like values as string literals:
    , OverloadedStrings

    -- A syntactic convenience for working with record values (used by Jambhala's utilities):
    , RecordWildCards

    -- Allows referencing type variables in multiple scopes (required to lift parameters in parameterized validators):
    , ScopedTypeVariables

    -- Required for all Plutus contracts to translate between Plutus and Haskell:
    , TemplateHaskell

    -- Provides a convenient way to disambiguate type variables inline
    , TypeApplications

    -- Allows type-level functions (used in Jambhala's ValidatorEndpoints & MintingEndpoint classes):
    , TypeFamilies

Beyond these, the sample contracts include only the specific language extensions needed to compile their code. Extensions enabled by default are still declared explicitly in the sample contracts when they are introduced for the first time, in order to explain their use.

Keep in mind that Haskell language extensions are experimental modifications to compiler behavior: they should be used only when they provide a concrete benefit and with clear understanding of their purpose. It is better to add extensions incrementally as they become needed than to add a multitude of modifications to the compiler as boilerplate in every file.

Sample contracts

The source code for the sample Plutus contracts live in the src/Contracts/Samples folder.

If you want to hide the sample contracts from the jamb utility and only serve your own contracts, you can modify the main action in app/Main.hs accordingly:

main :: IO ()
main = runJamb contracts -- << replace `allContracts` with `contracts` to hide sample contracts
  where allContracts = contracts <> samples

Creating a Contract

To create a new contract, create a new .hs file in the src/Contracts directory, and write a module declaration, i.e.:

module Contracts.MyContract where

In the jambhala.cabal file, add your module name (i.e. Contracts.MyContract) to the exposed-modules section of the library stanza:

library
  import: common
  exposed-modules:
    Contracts
    Jambhala.CLI
    Jambhala.Plutus
    Jambhala.Utils
    Prelude

-- Add new contracts here, i.e.:
    Contracts.MyContract
    Contracts.MyOtherContract

...

🚨 IMPORTANT: you must stage any new contract files you create to git before they are visible to Nix for compilation. Use the Source Control option in the left sidebar of VS Codium/Code or stage changes from the command line with git add.

We're now ready to write our contract. We begin by defining a predicate function to express the validator or minting policy logic.

We then define a custom type synonym for our contract, using either ValidatorContract or MintingContract with a type-level string as an identifier:

type MyValidator = ValidatorContract "my-validator"

or...

type MyMintingPolicy = MintingContract "my-minting-policy"

The string identifier will be used to reference the contract in jamb CLI commands.

Then we compile the predicate code into Plutus (using Template Haskell) and apply the appropriate Jambhala constructor function based on the type of our contract. We must provide a type signature for this value with the type synonym chosen above:

contract :: MyValidator
contract = mkValidatorContract $$(compile [||validator||])

or...

contract :: MyMintingPolicy
contract = mkMintingContract $$(compile [||policy||])

See the contracts in src/Contracts/Samples for examples of predicate definition and compilation.

Writing Emulator Tests

Jambhala provides an enhanced variant of the plutus-apps blockchain emulator with a simpler and more intuitive API. This tool (and the associated utilities imported from Jambhala.Utils) allows us to write simple and readable off-chain code in Haskell and conduct simple tests of our contracts.

The emulator environment's behavior doesn't always perfectly match the way contracts behave on-chain (for instance, fee amounts may vary and should not be used for predictive purposes). For rigorous testing of contracts intended for production, more robust tools like plutus-simple-model should be used. However, the emulator provides a way to confirm the expected behavior of on-chain scripts, as well as a good way to practice Haskell fundamentals.

`ValidatorEndpoints` & `MintingEndpoint` Classes

After defining a custom type synonym for our contract using either ValidatorContract or MintingContract and a type-level string identifier, we must instantiate one of two corresponding typeclasses to implement emulation endpoints.

`ValidatorEndpoints`

The ValidatorEndpoints class consists of the following:

Two associated data types: GiveParam and GrabParam. These represent the types of the inputs our off-chain endpoint actions will accept.
Two methods, give and grab, which define the off-chain endpoint actions through which we can lock and unlock UTxOs at our contract's script address in an emulated blockchain environment.

GiveParam and GrabParam are associated data types, which are used to declare custom data types associated with an instance of a particular typeclass:

instance ValidatorEndpoints MyContract where
  newtype GiveParam MyContract = Give {lovelace :: Integer}
  data GrabParam MyContract = Grab

Here we've declared two new data types associated with MyContract: GiveParam MyContract and GrabParam MyContract. We've used the more efficient newtype keyword to declare our GiveParam type, since it has a single constructor and a single field. Our GrabParam type contains no fields (in this simple hypothetical example, we don't need to provide any information to unlock UTxOs from the contract address). We can think of this type as equivalent to the Unit type (()), but we'll use the value Grab to construct it, rather than ().

Note: We can call the constructors whatever we like, but the sample contracts use Give and Grab, which provide semantic clarity in the context of our emulator tests.

In order for the emulator to work properly, we also need to be able to encode and decode parameter values to/from JSON format. This necessitates a bit of boilerplate deriving code for each of our parameter types:

instance ValidatorEndpoints MyContract where
  newtype GiveParam MyContract = Give {lovelace :: Integer}
    deriving (Generic, FromJSON, ToJSON)
  data GrabParam MyContract = Grab
    deriving (Generic, FromJSON, ToJSON)

We're now ready to implement the give and grab endpoint methods, which have the following signatures:

give :: GiveParam MyContract -> ContractM MyContract ()
grab :: GrabParam MyContract -> ContractM MyContract ()

They accept values of our newly-created GiveParam and GrabParam types, and return a unit value inside a monadic context called ContractM, which is parameterized by our MyContract type.

Note: ContractM is a type synonym for a more polymorphic Contract monad defined in the plutus-apps libraries.

The give and grab endpoint actions can contain arbitrary Haskell code depending on the nature of the contract. Their role is to construct and submit transactions, ideally conducting some preliminary validation mirroring the logic of the contract's on-chain script. The purpose of this preliminary off-chain validation is to prevent unnecessary submission of invalid transactions.

Ultimately, give and grab need to submit a transaction to the script address and await confirmation, using the submitAndConfirm function. This function takes a Transaction value constructed via the Tx constructor and two fields: lookups (which define which information is visible to the transaction) and constraints (which define the conditions under which the transaction succeeds or fails):

submitAndConfirm
      Tx
        { lookups = scriptLookupsFor contract,
          constraints = mustPayToScriptWithDatum contract () lovelace
        }

`MintingEndpoint`

The MintingEndpoint class is similar to ValidatorEndpoints, but is simpler due to the comparative simplicity of minting policies vs. validators. It consists of the following:

One associated data type: MintParam
One method, mint, which defines the off-chain endpoint action through which we can mint assets with the policy.

instance MintingEndpoint MyMinting where
  data MintParam MyMinting = Mint
    { tokenName :: !TokenName,
      tokenQuantity :: !Integer
    }
    deriving (Generic, FromJSON, ToJSON)
  mint :: MintParam MyMinting -> ContractM MyMinting ()
  mint (Mint tokenName tokenQuantity)  = do
    submitAndConfirm
      Tx
        { lookups = scriptLookupsFor contract,
          constraints = mustMint contract tokenName tokenQuantity
        }

Note: Off-chain endpoint code is more complex than on-chain predicate functions and is beyond the scope of our tutorial at this time: refer to the sample contracts containing off-chain emulation for more examples.

Define the test

Now that we've implemented our endpoint actions, we're ready to define our emulator test. We begin by declaring a variable for our test (i.e. test :: EmulatorTest).

The test is constructed by calling the initEmulator function (imported from Jambhala.Utils). This function requires a type application (i.e. @MyContract) to disambiguate the type of the contract being emulated. It then receives two arguments:

The number of mock wallets the test requires (expressed as an integer literal)
A comma-separated list of EmulatorAction values.

EmulatorAction values primarily consist of (indirect) calls to the endpoints we defined in the ValidatorEndpoints or MintingEndpoint instance for our contract. These can be conveniently expressed using fromWallet and toWallet (for validator contracts) or forWallet (for minting contracts), which provide a pseudo-code like semantics when used with infix notation:

test :: EmulatorTest
test =
  initEmulator @MyContract
    2
    [ Give {lovelace = 3_000_000} `fromWallet` 1,
      Grab `toWallet` 2
    ]

This test is initialized with 2 mock wallets. Wallet 1 gives 3 ADA to the script address, then Wallet 2 claims the gift.

EmulatorAction values can also be included in the list to simulate the passage of time. The waitUntil action takes a slot number and advances the emulated blockchain to that slot, which is useful for testing contracts involving deadlines (see Vesting.hs and ParamVesting.hs)

Using the `jamb` CLI

The jamb CLI can perform various operations on your contracts, including calculating its script hash, testing it using a blockchain emulator, and compiling it into a .plutus file. To do this we need to prepare a JambExports value in each of our contracts. Start by declaring a value of this type (i.e. exports :: JambExports).

Construct the exported contract using the defExports and export utility functions (imported from Jambhala.Utils):

exports :: JambExports
exports = export (defExports contract)

The defExports (default exports) function takes a contract value and produces an ExportTemplate value containing the contract's name and its script. The result of this function is then passed to export, which constructs an export package compatible with the CLI.

Adding data exports

The JambExports can optionally include a list of DataExport values. These are sample values to supply as inputs during transaction construction with cardano-cli. Any value of a type with a ToData instance can be exported.

If data exports are included, the jamb CLI will produce serialised JSON versions of them along with your contract script when you use the jamb -w command. These optional exports are included as additional input to defExports using record update syntax and the dataExports attribute:

exports :: JambExports
exports = 
  export 
    (defExports contract) -- Parentheses are required when using record update syntax
      { dataExports = 
        [
          () `toJSONfile` "unit",
          42 `toJSONfile` "forty-two"
        ]
      }

Note: the value provided for dataExports must be a list, even if you are only exporting a single value.

In this example, running jamb -w my-contract will serialise contract into a .plutus file and save it to cardano-cli-guru/assets/scripts/plutus/my-contract.plutus. It will also produce a serialised JSON representation of a unit value (saved to cardano-cli-guru/assets/data/unit.json) and the integer 42 (saved to cardano-cli-guru/assets/data/forty-two.json).

Adding emulator test

An emulator test value (:: EmulatorTest) can also be optionally included in the record input, using the emulatorTest attribute:

exports :: JambExports
exports = 
  export 
    (defExports contract) 
      { dataExports = 
        [
          () `toJSONfile` "unit",
          42 `toJSONfile` "forty-two"
        ],
        emulatorTest = test
      }

Adding to the Contract Map
Once we've completed our exports value, the final step is to make our contract visible to the CLI. We go to src/Contracts/Contracts.hs and import our contract's module as a qualified import, i.e.:

import Contracts.MyContract qualified as MyContract

Then we add a new entry to the contracts list containing the exports value:

contracts :: Contracts
contracts = [
    MyContract.exports
  ]

Once our contract has been added to the list, it can now be operated on by the jamb CLI.

Compute the hash of the script:
```
jamb -s my-contract
```
Run the provided emulator test:
```
jamb -t my-contract
```
Write the contract and associated data exports to files:
```
jamb -w my-contract
```

Using GHCi

To start a GHCi REPL session, run jrepl and then load your contract:

jrepl

Prelude Contracts λ > :m Contracts.MyContract
Prelude Contracts.MyContract λ >

Serving `plutus-apps` docs

To serve docs for the specific revision of plutus-apps this project is using, open a new bash terminal from the project root directory and run the following command:

serve-docs

The script will look up the specific plutus-apps revision hash from the cabal.project file, clone the plutus-apps repository (if it doesn't already exist) and checkout this revision, then launch a new nix develop shell and serve the docs at http://0.0.0.0:8002/.

To view the correct Haddock documentation for the revision you are using, open http://0.0.0.0:8002/haddock in your browser.

Note: This will require significant additional build time and storage space the first time the docs are served. Alternatively you can view Haddock docs for the most recent version of plutus-apps at https://input-output-hk.github.io/plutus-apps/main/.

Updating Jambhala

🛠️ This section is under construction...

Since Jambhala is under active development and is closely tracking the progress of plutus-apps, its codebase changes frequently.

Learning Mode

If you created your repository by forking Jambhala (Learning Mode), you can update Jambhala using the jupdate command:

jupdate

This will fetch and merge changes from the upstream Jambhala repository, bringing your fork in sync while preserving any local changes you've made.

If you've made changes to any core Jambhala files, you may encounter a merge conflict that you'll need to resolve. You may find a VS Code extension like Git Merger to be helpful with this.

Development Mode

Unlike forks, Github repositories generated from templates have unique histories, so they aren't able to fetch and merge upstream changes as smoothly. However it's still possible to merge updates from an upstream template into your project with a little manual effort.

The jsetup wizard added the upstream template as a remote source. You can now run the jupdate command to fetch any changes to the template and attempt to merge them:

jupdate

Note that this command is distinct from the jamb -u command discussed below, which updates only the plutus-apps dependency in cabal.project, not Jambhala itself.

You will need to manually resolve the resulting merge conflicts. You may find a VS Code extension like Git Merger to be helpful with this.

Updating Plutus Dependencies

The non-Hackage dependencies in the cabal.project file are following the plutus-apps library, with sha256 hashes calculated for each source-repository-package entry.

jamb provides a utility to easily update plutus-apps to the most recent revision and adjust all related dependencies. Run the jamb -u command to pull the latest revision and generate a new cabal.project file.

jamb -u

🚨 WARNING! This operation rewrites your cabal.project file according to the most recent plutus-apps commit, and may cause your environment and/or contracts to break. You should use at your own risk, but you can also easily restore a previous cabal.project file by following the instructions for Restoring a previous version below.

Set `plutus-apps` to a specific commit/tag

You can also use the jamb -u command with an additional argument to set plutus-apps to a specific commit hash or tag:

jamb -u 38979da68816ab84faf6bfec6d0e7b6d47af651a

You can run the pa-history command to view the full commit history for plutus-apps:

pa-history

Use the up/down keys to navigate or type q to quit.

🚨 WARNING! The code in the sample contracts and Jambhala.Plutus module have been designed for compatibility with very recent commits of plutus-apps - this means pointing plutus-apps to older tags/commits is much more likely to result in breakage. Use this feature at your own risk!

Restoring a previous version

Before the jamb -u command rewrites your cabal.project file, a backup of your existing cabal.project will be created in the backups/ directory in case you need to roll back the update. Just delete the current cabal.project file, copy the backup file and rename it to cabal.project. Then run direnv allow or reload the project in VS Code and your previous project state will be restored.

Manually updating dependencies

Since Nix flakes require pure inputs to guarantee reproducibility, and the content associated with a particular Git repository/tag can change, we need to hash any repositories we include in cabal.project. This means if we need to manually change any dependencies or add additional ones, we'll need to calculate new hashes and replace the existing ones.

While not recommended, if you need to change the revision of Plutus dependencies manually, you can calculate sha256 hashes for them using the nix-prefetch-git utility, which has been provided with this project's Nix development environment.

Use the following command to calculate a hash:

nix-prefetch-git LOCATION TAG

Here is an example of how we'd calculate a hash for the plutus-apps dependency with tag 5dda0323ef30c92bfebd520ac8d4bc5a46580c5c:

nix-prefetch-git https://github.com/input-output-hk/plutus-apps.git 5dda0323ef30c92bfebd520ac8d4bc5a46580c5c

...

git revision is 5dda0323ef30c92bfebd520ac8d4bc5a46580c5c
path is /nix/store/mzjqwvfc2qmmvg9llskjyvkdph8hv4i4-plutus-apps-5dda032
git human-readable version is -- none --
Commit date is 2023-01-19 17:41:18 +0000
hash is 05ggi69w2n0cnhfyifpa83aphq6avk0fd9zvxywn1scwxza85r1a
{
  "url": "https://github.com/input-output-hk/plutus-apps.git",
  "rev": "5dda0323ef30c92bfebd520ac8d4bc5a46580c5c",
  "date": "2023-01-19T17:41:18+00:00",
  "path": "/nix/store/mzjqwvfc2qmmvg9llskjyvkdph8hv4i4-plutus-apps-5dda032",
  "sha256": "05ggi69w2n0cnhfyifpa83aphq6avk0fd9zvxywn1scwxza85r1a",
  "fetchLFS": false,
  "fetchSubmodules": false,
  "deepClone": false,
  "leaveDotGit": false
}

The hash string must now be added as a comment prexied with --sha256: anywhere inside the source-repository-package stanza like so:

source-repository-package
  type: git
  location: https://github.com/input-output-hk/plutus-apps.git
  tag: 5dda0323ef30c92bfebd520ac8d4bc5a46580c5c
  --sha256: 05ggi69w2n0cnhfyifpa83aphq6avk0fd9zvxywn1scwxza85r1a

Troubleshooting

This section is under construction...

Additional issues and solutions will be documented here as they're encountered during public testing.

Nix stops working after updating Mac OS
Nix installation on Macs appends a code snippet to /etc/zshrc and /etc/bashrc, which is required for Nix to work properly with zsh and bash shells. Unfortunately one or both of these additions may be erased after updating your Mac.

This will break:

all Nix commands
any Jambhala commands that use Nix under the hood
if you installed cardano-node/cardano-cli using Nix (i.e. via Cardano EZ-Installer), the cardano-node/cardano-cli commands and associated aliases to start the node

To resolve the issue, edit ~/.zprofile, ~/.zshrc, ~/.bash_profile, and ~/.bashrc, adding the following snippet to the top of each file:

# Nix
if [ -e '/nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh' ]; then
  . '/nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh'
fi
# End Nix

NOTE: make sure this snippet is above the direnv hook in these files. You must then restart the shell for the changes to take effect.

'hs-source-dirs: app' specifies a directory which does not exist.

  > Warning: 'hs-source-dirs: app' specifies a directory which does not exist.
  > building
  > Preprocessing library for jambhala-0.1.0.0..
  > Error: Setup: can't find source for Contracts/... in src,

You need to stage your new module file in git so it becomes visible to the Nix environment. Use the Source Control option in the left sidebar of VS Code or stage changes from the command line with git add. Then try the operation that caused the error again.

VS Codium/Code doesn't provide Haskell IDE support: hangs with Processing: 1/x:

It's possible the project dependencies haven't been properly built via cabal, which is a requirement for Haskell Language Server support in VS Codium/Code. Run cabal build to build the dependencies.

General Troubleshooting Techniques

Restart Haskell LSP Server: restarting haskell-language-server often fixes common issues with Haskell in VS Code. Open the command palette (Ctrl + Shift + p) and begin typing Restart Haskell LSP Server until you see this option, and select it. In the future it will be pinned to the top of the command palette options and easier to find.
jrebuild: cleaning the dist-newstyle directory of all build artifacts and rebuilding the project may resolve certain issues
```
jrebuild
```
Note that it will be time-consuming to cabal build the project from scratch, so be sure to exhaust all other troubleshooting options before attempting.
Delete ~/.local/state/cabal/store: if you have pre-existing Haskell tooling installed system-wide (i.e. via GHCup, or the Haskell extension in VS Codium/Code), it's possible that build artifacts from Cabal can conflict with the Jambhala environment, resulting in Cabal errors or preventing IDE features from Haskell Language Server to work correctly in the editor. Removing ~/.local/state/cabal/store can resolve such errors (the contents of this directory are always safe to remove and will not break any functionality). After removing the directory, run the jrebuild command to rebuild the project with Cabal before trying again.

For assistance or bug reporting, file an issue or email [email protected].

Name		Name	Last commit message	Last commit date
Latest commit History 210 Commits
.vscode		.vscode
app		app
backups		backups
cardano-cli-guru @ 5fe4200		cardano-cli-guru @ 5fe4200
cardano-devnet @ 6686e43		cardano-devnet @ 6686e43
cardano-ez-installer @ 36bfbf5		cardano-ez-installer @ 36bfbf5
docs		docs
jambhalucid @ 99f30f7		jambhalucid @ 99f30f7
scripts		scripts
setup		setup
src		src
.envrc		.envrc
.ghci		.ghci
.gitignore		.gitignore
.gitmodules		.gitmodules
LICENSE		LICENSE
README.md		README.md
README_TEMPLATE.md		README_TEMPLATE.md
cabal.project		cabal.project
cabal.project.local		cabal.project.local
flake.lock		flake.lock
flake.nix		flake.nix
hie.yaml		hie.yaml
jamb_logo.png		jamb_logo.png
jambhala.cabal		jambhala.cabal
ready?		ready?

License

amibening/jambhala

Folders and files

Latest commit

History

Repository files navigation

A Full-Featured Cardano Development Suite

Features

Installation

0. Requirements

1. Install nix

2. Configure nix.conf

3. Create your repository

Learning Mode

Development Mode

4. Clone repository & test readiness

Installing direnv

Installing direnv manually

5. Build environment & set up project

6. Start coding

Adding Extensions to Jambhala Editor

Vim Mode

Use Jambhala with your own VS Code/VS Codium

Using the jamb CLI

Listing Contracts

Hashing Validators

Testing Contracts with Emulator Trace

Compiling Contracts to .plutus Files

Writing Contracts

🚨 Read This First!

Prelude

Plutus imports

Language extensions

Sample contracts

Creating a Contract

Writing Emulator Tests

ValidatorEndpoints & MintingEndpoint Classes

ValidatorEndpoints

MintingEndpoint

Define the test

Using the jamb CLI

Adding data exports

Adding emulator test

Using GHCi

Serving plutus-apps docs

Updating Jambhala

🛠️ This section is under construction...

Learning Mode

Development Mode

Updating Plutus Dependencies

Set plutus-apps to a specific commit/tag

Restoring a previous version

Manually updating dependencies

Troubleshooting

This section is under construction...

General Troubleshooting Techniques

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

1. Install `nix`

2. Configure `nix.conf`

Installing `direnv`

Installing `direnv` manually

Using the `jamb` CLI

Compiling Contracts to `.plutus` Files

`ValidatorEndpoints` & `MintingEndpoint` Classes

`ValidatorEndpoints`

`MintingEndpoint`

Using the `jamb` CLI

Serving `plutus-apps` docs

Set `plutus-apps` to a specific commit/tag

Packages