Merge tag 'usb-for-v3.11' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.11 merge window All function drivers are now converted to our new configfs-based binding. Eventually this will help us getting rid of in-kernel gadget drivers and only keep function drivers in the kernel. MUSB was taught that it needs to be built for host-only and device-only modes too. We had this support long ago but it involved a ridiculous amount of ifdefs. Now we have a much cleaner approach. Samsung Exynos4 platform now implements HSIC support. We're introducing support for AB8540 and AB9540 PHYs. MUSB module reinsertion now works as expected, before we were getting -EBUSY being returned by the resource checks done on driver core. DWC3 now has minimum support for TI's AM437x series of SoCs. OMAP5 USB3 PHY learned one extra DPLL configuration values because that PHY is reused in TI's DRA7xx devices. We're introducing support for Faraday fotg210 UDCs. Last, but not least, the usual set of non-critical fixes and cleanups ranging from usage of platform_{get,set}_drvdata to lock improvements. Signed-of-by: Felipe Balbi <[email protected]>
aosmith · Jun 12, 2013 · 976f8be · 976f8be
2 parents 1143832 + b1fd6cb
commit 976f8be
Show file tree

Hide file tree

Showing 81 changed files with 5,802 additions and 1,228 deletions.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-eem b/Documentation/ABI/testing/configfs-usb-gadget-eem
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/eem.name
+Date:		May 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-phonet b/Documentation/ABI/testing/configfs-usb-gadget-phonet
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/phonet.name
+Date:		May 2013
+KenelVersion:	3.11
+Description:
+
+		This item contains just one readonly attribute: ifname.
+		It contains the network interface name assigned during
+		network device registration.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-rndis b/Documentation/ABI/testing/configfs-usb-gadget-rndis
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/rndis.name
+Date:		May 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-subset b/Documentation/ABI/testing/configfs-usb-gadget-subset
@@ -0,0 +1,14 @@
+What:		/config/usb-gadget/gadget/functions/geth.name
+Date:		May 2013
+KenelVersion:	3.11
+Description:
+		The attributes:
+
+		ifname		- network device interface name associated with
+				this function instance
+		qmult		- queue length multiplier for high and
+				super speed
+		host_addr	- MAC address of host's end of this
+				Ethernet over USB link
+		dev_addr	- MAC address of device's end of this
+				Ethernet over USB link
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -6,27 +6,10 @@ Practice : Universal Serial Bus" with the following modifications
 and additions :
 
 Required properties :
- - compatible : Should be "nvidia,tegra20-ehci" for USB controllers
-   used in host mode.
- - phy_type : Should be one of "ulpi" or "utmi".
- - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
-   activated for the bus to be powered.
- - nvidia,phy : phandle of the PHY instance, the controller is connected to.
-
-Required properties for phy_type == ulpi:
-  - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+ - compatible : Should be "nvidia,tegra20-ehci".
+ - nvidia,phy : phandle of the PHY that the controller is connected to.
+ - clocks : Contains a single entry which defines the USB controller's clock.
 
 Optional properties:
-  - dr_mode : dual role mode. Indicates the working mode for
-   nvidia,tegra20-ehci compatible controllers.  Can be "host", "peripheral",
-   or "otg".  Default to "host" if not defined for backward compatibility.
-      host means this is a host controller
-      peripheral means it is device controller
-      otg means it can operate as either ("on the go")
-  - nvidia,has-legacy-mode : boolean indicates whether this controller can
-    operate in legacy mode (as APX 2500 / 2600). In legacy mode some
-    registers are accessed through the APB_MISC base address instead of
-    the USB controller. Since this is a legacy issue it probably does not
-    warrant a compatible string of its own.
-  - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
-    USB ports, which need reset twice due to hardware issues.
+ - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
+   USB ports, which need reset twice due to hardware issues.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -4,14 +4,49 @@ The device node for Tegra SOC USB PHY:
 
 Required properties :
  - compatible : Should be "nvidia,tegra20-usb-phy".
- - reg : Address and length of the register set for the USB PHY interface.
- - phy_type : Should be one of "ulpi" or "utmi".
+ - reg : Defines the following set of registers, in the order listed:
+   - The PHY's own register set.
+     Always present.
+   - The register set of the PHY containing the UTMI pad control registers.
+     Present if-and-only-if phy_type == utmi.
+ - phy_type : Should be one of "utmi", "ulpi" or "hsic".
+ - clocks : Defines the clocks listed in the clock-names property.
+ - clock-names : The following clock names must be present:
+   - reg: The clock needed to access the PHY's own registers. This is the
+     associated EHCI controller's clock. Always present.
+   - pll_u: PLL_U. Always present.
+   - timer: The timeout clock (clk_m). Present if phy_type == utmi.
+   - utmi-pads: The clock needed to access the UTMI pad control registers.
+     Present if phy_type == utmi.
+   - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2).
+     Present if phy_type == ulpi, and ULPI link mode is in use.
 
 Required properties for phy_type == ulpi:
   - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
 
+Required PHY timing params for utmi phy:
+  - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before
+    start of sync launches RxActive
+  - nvidia,elastic-limit : Variable FIFO Depth of elastic input store
+  - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait
+    before declare IDLE.
+  - nvidia,term-range-adj : Range adjusment on terminations
+  - nvidia,xcvr-setup : HS driver output control
+  - nvidia,xcvr-lsfslew : LS falling slew rate control.
+  - nvidia,xcvr-lsrslew :  LS rising slew rate control.
+
 Optional properties:
   - nvidia,has-legacy-mode : boolean indicates whether this controller can
     operate in legacy mode (as APX 2500 / 2600). In legacy mode some
     registers are accessed through the APB_MISC base address instead of
-    the USB controller.
+    the USB controller.
+  - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
+    optimizations for the devices that are always connected. e.g. modem.
+  - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
+    "host", "peripheral", or "otg". Defaults to "host" if not defined.
+      host means this is a host controller
+      peripheral means it is device controller
+      otg means it can operate as either ("on the go")
+
+Required properties for dr_mode == otg:
+  - vbus-supply: regulator for VBUS
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -449,7 +449,11 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+	};
+
+	usb-phy@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
 	};
 
 	sdhci@c8000600 {

diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -428,17 +428,26 @@
 		status = "okay";
 	};
 
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
-	usb-phy@c5004400 {
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	usb-phy@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000200 {

diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
@@ -38,13 +38,20 @@
 
 	usb@c5000000 {
 		status = "okay";
-		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
 	serial@70006000 {
 		status = "okay";
 	};

diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -427,17 +427,26 @@
 		status = "okay";
 	};
 
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+		nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
-	usb-phy@c5004400 {
-		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+	usb-phy@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000000 {

diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -569,17 +569,28 @@
 		dr_mode = "otg";
 	};
 
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+		dr_mode = "otg";
+	};
+
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
-	usb-phy@c5004400 {
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	usb-phy@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000000 {
@@ -807,6 +818,15 @@
 			gpio = <&pmic 1 0>;
 			enable-active-high;
 		};
+
+		vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_vbus_wup1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio 24 0>; /* PD0 */
+		};
 	};
 
 	sound {

diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -470,6 +470,10 @@
 		status = "okay";
 	};
 
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
 	sdhci@c8000600 {
 		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */

diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -314,17 +314,27 @@
 		nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
 	};
 
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+	};
+
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+		nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
-	usb-phy@c5004400 {
-		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
+	usb-phy@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000000 {
@@ -390,6 +400,15 @@
 			regulator-max-microvolt = <1800000>;
 			regulator-always-on;
 		};
+
+		vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio 170 0>; /* PV2 */
+		};
 	};
 
 	sound {

diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -505,17 +505,26 @@
 		status = "okay";
 	};
 
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
-	usb-phy@c5004400 {
-		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	usb-phy@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000000 {