Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has appeared in -next and independently received a
  build success notification from the kbuild robot.  The 'for-4.5/block-
  dax' topic branch was rebased over the weekend to drop the "block
  device end-of-life" rework that Al would like to see re-implemented
  with a notifier, and to address bug reports against the badblocks
  integration.

  There is pending feedback against "libnvdimm: Add a poison list and
  export badblocks" received last week.  Linda identified some localized
  fixups that we will handle incrementally.

  Summary:

   - Media error handling: The 'badblocks' implementation that
     originated in md-raid is up-levelled to a generic capability of a
     block device.  This initial implementation is limited to being
     consulted in the pmem block-i/o path.  Later, 'badblocks' will be
     consulted when creating dax mappings.

   - Raw block device dax: For virtualization and other cases that want
     large contiguous mappings of persistent memory, add the capability
     to dax-mmap a block device directly.

   - Increased /dev/mem restrictions: Add an option to treat all
     io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
     while a driver is actively using an address range.  This behavior
     is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
     overridden by the existing "iomem=relaxed" kernel command line
     option.

   - Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
     block device shutdown crash fix, and other small libnvdimm fixes"

* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
  block: kill disk_{check|set|clear|alloc}_badblocks
  libnvdimm, pmem: nvdimm_read_bytes() badblocks support
  pmem, dax: disable dax in the presence of bad blocks
  pmem: fail io-requests to known bad blocks
  libnvdimm: convert to statically allocated badblocks
  libnvdimm: don't fail init for full badblocks list
  block, badblocks: introduce devm_init_badblocks
  block: clarify badblocks lifetime
  badblocks: rename badblocks_free to badblocks_exit
  libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
  libnvdimm: Add a poison list and export badblocks
  nfit_test: Enable DSMs for all test NFITs
  md: convert to use the generic badblocks code
  block: Add badblock management for gendisks
  badblocks: Add core badblock management code
  block: fix del_gendisk() vs blkdev_ioctl crash
  block: enable dax for raw block devices
  block: introduce bdev_file_inode()
  restrict /dev/mem to idle io memory ranges
  arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
  ...

arch/arm/Kconfig

@@ -2,6 +2,7 @@ config ARM
 	bool
 	default y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H

arch/arm/Kconfig.debug

@@ -15,20 +15,6 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to

arch/arm64/Kconfig

@@ -3,6 +3,7 @@ config ARM64
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL

arch/arm64/Kconfig.debug

@@ -14,20 +14,6 @@ config ARM64_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	help
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-	  If in doubt, say Y.
-
 config PID_IN_CONTEXTIDR
 	bool "Write the current PID to the CONTEXTIDR register"
 	help

arch/frv/Kconfig

@@ -10,6 +10,7 @@ config FRV
 	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CPU_DEVICES
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select OLD_SIGSUSPEND3
 	select OLD_SIGACTION

arch/m32r/Kconfig

@@ -13,6 +13,7 @@ config M32R
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_USES_GETTIMEOFFSET
 	select MODULES_USE_ELF_RELA
 	select HAVE_DEBUG_STACKOVERFLOW

arch/powerpc/Kconfig

@@ -159,6 +159,7 @@ config PPC
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select HAVE_ARCH_SECCOMP_FILTER
 
 config GENERIC_CSUM

arch/powerpc/Kconfig.debug

@@ -335,18 +335,6 @@ config PPC_EARLY_DEBUG_CPM_ADDR
 	  platform probing is done, all platforms selected must
 	  share the same address.
 
-config STRICT_DEVMEM
-	def_bool y
-	prompt "Filter access to /dev/mem"
-	help
-	  This option restricts access to /dev/mem.  If this option is
-	  disabled, you allow userspace access to all memory, including
-	  kernel and userspace memory. Accidental memory access is likely
-	  to be disastrous.
-	  Memory access is required for experts who want to debug the kernel.
-
-	  If you are unsure, say Y.
-
 config FAIL_IOMMU
 	bool "Fault-injection capability for IOMMU"
 	depends on FAULT_INJECTION

arch/s390/Kconfig

@@ -66,6 +66,7 @@ config S390
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_SG_CHAIN

arch/s390/Kconfig.debug

@@ -5,18 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config STRICT_DEVMEM
-	def_bool y
-	prompt "Filter access to /dev/mem"
-	---help---
-	  This option restricts access to /dev/mem.  If this option is
-	  disabled, you allow userspace access to all memory, including
-	  kernel and userspace memory. Accidental memory access is likely
-	  to be disastrous.
-	  Memory access is required for experts who want to debug the kernel.
-
-	  If you are unsure, say Y.
-
 config S390_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL

arch/tile/Kconfig

@@ -19,6 +19,7 @@ config TILE
 	select VIRT_TO_BUS
 	select SYS_HYPERVISOR
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CLOCKEVENTS
 	select MODULES_USE_ELF_RELA
@@ -116,9 +117,6 @@ config ARCH_DISCONTIGMEM_DEFAULT
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-config STRICT_DEVMEM
-	def_bool y
-
 # SMP is required for Tilera Linux.
 config SMP
 	def_bool y

arch/unicore32/Kconfig

@@ -1,5 +1,6 @@
 config UNICORE32
 	def_bool y
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_MEMBLOCK

arch/unicore32/Kconfig.debug

@@ -2,20 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
 config EARLY_PRINTK
 	def_bool DEBUG_OCD
 	help

arch/x86/Kconfig

@@ -24,6 +24,7 @@ config X86
 	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FAST_MULTIPLIER
 	select ARCH_HAS_GCOV_PROFILE_ALL

arch/x86/Kconfig.debug

@@ -5,23 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel. Note that with PAT support
-	  enabled, even in this case there are restrictions on /dev/mem
-	  use due to the cache aliasing requirements.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to PCI space and the BIOS code and data regions.
-	  This is sufficient for dosemu and X and all common users of
-	  /dev/mem.
-
-	  If in doubt, say Y.
-
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y

block/Makefile

@@ -8,7 +8,7 @@ obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-tag.o blk-sysfs.o \
 			blk-iopoll.o blk-lib.o blk-mq.o blk-mq-tag.o \
 			blk-mq-sysfs.o blk-mq-cpu.o blk-mq-cpumap.o ioctl.o \
 			genhd.o scsi_ioctl.o partition-generic.o ioprio.o \
-			partitions/
+			badblocks.o partitions/
 
 obj-$(CONFIG_BOUNCE)	+= bounce.o
 obj-$(CONFIG_BLK_DEV_BSG)	+= bsg.o