watchdog: Kconfig: fix help text indentation

Some entries indent their help text with 1 tab + 1 space or 1 tab only
instead of 1 tab + 2 spaces. Add the missing spaces.

Signed-off-by: Luca Ceresoli <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>

drivers/watchdog/Kconfig

@@ -680,10 +680,10 @@ config MAX77620_WATCHDOG
 	depends on MFD_MAX77620 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
-	 This is the driver for the Max77620 watchdog timer.
-	 Say 'Y' here to enable the watchdog timer support for
-	 MAX77620 chips. To compile this driver as a module,
-	 choose M here: the module will be called max77620_wdt.
+	  This is the driver for the Max77620 watchdog timer.
+	  Say 'Y' here to enable the watchdog timer support for
+	  MAX77620 chips. To compile this driver as a module,
+	  choose M here: the module will be called max77620_wdt.
 
 config IMX2_WDT
 	tristate "IMX2+ Watchdog"
@@ -1441,26 +1441,26 @@ config TQMX86_WDT
 	depends on X86
 	select WATCHDOG_CORE
 	help
-	This is the driver for the hardware watchdog timer in the TQMX86 IO
-	controller found on some of their ComExpress Modules.
+	  This is the driver for the hardware watchdog timer in the TQMX86 IO
+	  controller found on some of their ComExpress Modules.
 
-	To compile this driver as a module, choose M here; the module
-	will be called tqmx86_wdt.
+	  To compile this driver as a module, choose M here; the module
+	  will be called tqmx86_wdt.
 
-	Most people will say N.
+	  Most people will say N.
 
 config VIA_WDT
 	tristate "VIA Watchdog Timer"
 	depends on X86 && PCI
 	select WATCHDOG_CORE
 	help
-	This is the driver for the hardware watchdog timer on VIA
-	southbridge chipset CX700, VX800/VX820 or VX855/VX875.
+	  This is the driver for the hardware watchdog timer on VIA
+	  southbridge chipset CX700, VX800/VX820 or VX855/VX875.
 
-	To compile this driver as a module, choose M here; the module
-	will be called via_wdt.
+	  To compile this driver as a module, choose M here; the module
+	  will be called via_wdt.
 
-	Most people will say N.
+	  Most people will say N.
 
 config W83627HF_WDT
 	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
@@ -1746,10 +1746,10 @@ config BCM7038_WDT
 	depends on HAS_IOMEM
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 	help
-	 Watchdog driver for the built-in hardware in Broadcom 7038 and
-	 later SoCs used in set-top boxes.  BCM7038 was made public
-	 during the 2004 CES, and since then, many Broadcom chips use this
-	 watchdog block, including some cable modem chips.
+	  Watchdog driver for the built-in hardware in Broadcom 7038 and
+	  later SoCs used in set-top boxes.  BCM7038 was made public
+	  during the 2004 CES, and since then, many Broadcom chips use this
+	  watchdog block, including some cable modem chips.
 
 config IMGPDC_WDT
 	tristate "Imagination Technologies PDC Watchdog Timer"
@@ -2110,12 +2110,12 @@ config KEEMBAY_WATCHDOG
 	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
 	select WATCHDOG_CORE
 	help
-	 This option enable support for an In-secure watchdog timer driver for
-	 Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
-	 count unit. An interrupt will be triggered, when the count crosses
-	 the threshold configured in the register.
+	  This option enable support for an In-secure watchdog timer driver for
+	  Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
+	  count unit. An interrupt will be triggered, when the count crosses
+	  the threshold configured in the register.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called keembay_wdt.
+	  To compile this driver as a module, choose M here: the
+	  module will be called keembay_wdt.
 
 endif # WATCHDOG