Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...

Documentation/ABI/stable/sysfs-driver-firmware-zynqmp

@@ -0,0 +1,103 @@
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/ggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <[email protected]>
+Description:
+		Read/Write PMU global general storage register value,
+		GLOBAL_GEN_STORAGE{0:3}.
+		Global general storage register that can be used
+		by system to pass information between masters.
+
+		The register is reset during system or power-on
+		resets. Three registers are used by the FSBL and
+		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
+
+		Usage:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/pggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <[email protected]>
+Description:
+		Read/Write PMU persistent global general storage register
+		value, PERS_GLOB_GEN_STORAGE{0:3}.
+		Persistent global general storage register that
+		can be used by system to pass information between
+		masters.
+
+		This register is only reset by the power-on reset
+		and maintains its value through a system reset.
+		Four registers are used by the FSBL and other Xilinx
+		software products: PERS_GLOB_GEN_STORAGE{4:7}.
+		Register is reset only by a POR reset.
+
+		Usage:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <[email protected]>
+Description:
+		This sysfs interface allows to set the shutdown scope for the
+		next shutdown request. When the next shutdown is performed, the
+		platform specific portion of PSCI-system_off can use the chosen
+		shutdown scope.
+
+		Following are available shutdown scopes(subtypes):
+
+		subsystem:	Only the APU along with all of its peripherals
+				not used by other processing units will be
+				shut down. This may result in the FPD power
+				domain being shut down provided that no other
+				processing unit uses FPD peripherals or DRAM.
+		ps_only:	The complete PS will be shut down, including the
+				RPU, PMU, etc.  Only the PL domain (FPGA)
+				remains untouched.
+		system:		The complete system/device is shut down.
+
+		Usage:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		# echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		# echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/health_status
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <[email protected]>
+Description:
+		This sysfs interface allows to set the health status. If PMUFW
+		is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
+		bit on FPD WDT expiration. If healthy bit is set by a user
+		application running in Linux, PMUFW will do APU only restart. If
+		healthy bit is not set during FPD WDT expiration, PMUFW will do
+		system restart.
+
+		Usage:
+		Set healthy bit
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+Users:		Xilinx

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -8,6 +8,16 @@ Description:    Sets the device address to be used for read or write through
                 only when the IOMMU is disabled.
                 The acceptable value is a string that starts with "0x"
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/clk_gate
+Date:           May 2020
+KernelVersion:  5.8
+Contact:        [email protected]
+Description:    Allow the root user to disable/enable in runtime the clock
+                gating mechanism in Gaudi. Due to how Gaudi is built, the
+                clock gating needs to be disabled in order to access the
+                registers of the TPC and MME engines. This is sometimes needed
+                during debug by the user and hence the user needs this option
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -150,3 +160,10 @@ KernelVersion:  5.1
 Contact:        [email protected]
 Description:    Displays a list with information about all the active virtual
                 address mappings per ASID
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
+Date:           Mar 2020
+KernelVersion:  5.6
+Contact:        [email protected]
+Description:    Sets the stop-on_error option for the device engines. Value of
+                "0" is for disable, otherwise enable.

Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme

@@ -0,0 +1,104 @@
+What:		/sys/bus/event_source/devices/dfl_fmeX/format
+Date:		April 2020
+KernelVersion:  5.8
+Contact:	Wu Hao <[email protected]>
+Description:	Read-only. Attribute group to describe the magic bits
+		that go into perf_event_attr.config for a particular pmu.
+		(See ABI/testing/sysfs-bus-event_source-devices-format).
+
+		Each attribute under this group defines a bit range of the
+		perf_event_attr.config. All supported attributes are listed
+		below.
+
+		    event  = "config:0-11"  - event ID
+		    evtype = "config:12-15" - event type
+		    portid = "config:16-23" - event source
+
+		For example,
+
+		    fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
+
+		It shows this fab_mmio_read is a fabric type (0x02) event with
+		0x06 local event id for overall monitoring (portid=0xff).
+
+What:		/sys/bus/event_source/devices/dfl_fmeX/cpumask
+Date:		April 2020
+KernelVersion:  5.8
+Contact:	Wu Hao <[email protected]>
+Description:	Read-only. This file always returns cpu which the PMU is bound
+		for access to all fme pmu performance monitoring events.
+
+What:		/sys/bus/event_source/devices/dfl_fmeX/events
+Date:		April 2020
+KernelVersion:  5.8
+Contact:	Wu Hao <[email protected]>
+Description:	Read-only. Attribute group to describe performance monitoring
+		events specific to fme. Each attribute in this group describes
+		a single performance monitoring event supported by this fme pmu.
+		The name of the file is the name of the event.
+		(See ABI/testing/sysfs-bus-event_source-devices-events).
+
+		All supported performance monitoring events are listed below.
+
+		Basic events (evtype=0x00)
+
+		    clock = "event=0x00,evtype=0x00,portid=0xff"
+
+		Cache events (evtype=0x01)
+
+		    cache_read_hit      = "event=0x00,evtype=0x01,portid=0xff"
+		    cache_read_miss     = "event=0x01,evtype=0x01,portid=0xff"
+		    cache_write_hit     = "event=0x02,evtype=0x01,portid=0xff"
+		    cache_write_miss    = "event=0x03,evtype=0x01,portid=0xff"
+		    cache_hold_request  = "event=0x05,evtype=0x01,portid=0xff"
+		    cache_data_write_port_contention =
+		                          "event=0x06,evtype=0x01,portid=0xff"
+		    cache_tag_write_port_contention =
+		                          "event=0x07,evtype=0x01,portid=0xff"
+		    cache_tx_req_stall  = "event=0x08,evtype=0x01,portid=0xff"
+		    cache_rx_req_stall  = "event=0x09,evtype=0x01,portid=0xff"
+		    cache_eviction      = "event=0x0a,evtype=0x01,portid=0xff"
+
+		Fabric events (evtype=0x02)
+
+		    fab_pcie0_read       = "event=0x00,evtype=0x02,portid=0xff"
+		    fab_pcie0_write      = "event=0x01,evtype=0x02,portid=0xff"
+		    fab_pcie1_read       = "event=0x02,evtype=0x02,portid=0xff"
+		    fab_pcie1_write      = "event=0x03,evtype=0x02,portid=0xff"
+		    fab_upi_read         = "event=0x04,evtype=0x02,portid=0xff"
+		    fab_upi_write        = "event=0x05,evtype=0x02,portid=0xff"
+		    fab_mmio_read        = "event=0x06,evtype=0x02,portid=0xff"
+		    fab_mmio_write       = "event=0x07,evtype=0x02,portid=0xff"
+		    fab_port_pcie0_read  = "event=0x00,evtype=0x02,portid=?"
+		    fab_port_pcie0_write = "event=0x01,evtype=0x02,portid=?"
+		    fab_port_pcie1_read  = "event=0x02,evtype=0x02,portid=?"
+		    fab_port_pcie1_write = "event=0x03,evtype=0x02,portid=?"
+		    fab_port_upi_read    = "event=0x04,evtype=0x02,portid=?"
+		    fab_port_upi_write   = "event=0x05,evtype=0x02,portid=?"
+		    fab_port_mmio_read   = "event=0x06,evtype=0x02,portid=?"
+		    fab_port_mmio_write  = "event=0x07,evtype=0x02,portid=?"
+
+		VTD events (evtype=0x03)
+
+		    vtd_port_read_transaction  = "event=0x00,evtype=0x03,portid=?"
+		    vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
+		    vtd_port_devtlb_read_hit   = "event=0x02,evtype=0x03,portid=?"
+		    vtd_port_devtlb_write_hit  = "event=0x03,evtype=0x03,portid=?"
+		    vtd_port_devtlb_4k_fill    = "event=0x04,evtype=0x03,portid=?"
+		    vtd_port_devtlb_2m_fill    = "event=0x05,evtype=0x03,portid=?"
+		    vtd_port_devtlb_1g_fill    = "event=0x06,evtype=0x03,portid=?"
+
+		VTD SIP events (evtype=0x04)
+
+		    vtd_sip_iotlb_4k_hit  = "event=0x00,evtype=0x04,portid=0xff"
+		    vtd_sip_iotlb_2m_hit  = "event=0x01,evtype=0x04,portid=0xff"
+		    vtd_sip_iotlb_1g_hit  = "event=0x02,evtype=0x04,portid=0xff"
+		    vtd_sip_slpwc_l3_hit  = "event=0x03,evtype=0x04,portid=0xff"
+		    vtd_sip_slpwc_l4_hit  = "event=0x04,evtype=0x04,portid=0xff"
+		    vtd_sip_rcc_hit       = "event=0x05,evtype=0x04,portid=0xff"
+		    vtd_sip_iotlb_4k_miss = "event=0x06,evtype=0x04,portid=0xff"
+		    vtd_sip_iotlb_2m_miss = "event=0x07,evtype=0x04,portid=0xff"
+		    vtd_sip_iotlb_1g_miss = "event=0x08,evtype=0x04,portid=0xff"
+		    vtd_sip_slpwc_l3_miss = "event=0x09,evtype=0x04,portid=0xff"
+		    vtd_sip_slpwc_l4_miss = "event=0x0a,evtype=0x04,portid=0xff"
+		    vtd_sip_rcc_miss      = "event=0x0b,evtype=0x04,portid=0xff"

Documentation/ABI/testing/sysfs-bus-soundwire-master

@@ -0,0 +1,23 @@
+What:		/sys/bus/soundwire/devices/sdw-master-N/revision
+		/sys/bus/soundwire/devices/sdw-master-N/clk_stop_modes
+		/sys/bus/soundwire/devices/sdw-master-N/clk_freq
+		/sys/bus/soundwire/devices/sdw-master-N/clk_gears
+		/sys/bus/soundwire/devices/sdw-master-N/default_col
+		/sys/bus/soundwire/devices/sdw-master-N/default_frame_rate
+		/sys/bus/soundwire/devices/sdw-master-N/default_row
+		/sys/bus/soundwire/devices/sdw-master-N/dynamic_shape
+		/sys/bus/soundwire/devices/sdw-master-N/err_threshold
+		/sys/bus/soundwire/devices/sdw-master-N/max_clk_freq
+
+Date:		April 2020
+
+Contact:	Pierre-Louis Bossart <[email protected]>
+		Bard Liao <[email protected]>
+		Vinod Koul <[email protected]>
+
+Description:	SoundWire Master-N DisCo properties.
+		These properties are defined by MIPI DisCo Specification
+		for SoundWire. They define various properties of the Master
+		and are used by the bus to configure the Master. clk_stop_modes
+		is a bitmask for simplifications and combines the
+		clock-stop-mode0 and clock-stop-mode1 properties.

Documentation/ABI/testing/sysfs-bus-soundwire-slave

@@ -0,0 +1,91 @@
+What:		/sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/clk_stop_mode1
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/simple_clk_stop_capable
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/clk_stop_timeout
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/reset_behave
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/high_PHY_capable
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/paging_support
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/bank_delay_support
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/p15_behave
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/master_count
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/source_ports
+		/sys/bus/soundwire/devices/sdw:.../dev-properties/sink_ports
+
+Date:		May 2020
+
+Contact:	Pierre-Louis Bossart <[email protected]>
+		Bard Liao <[email protected]>
+		Vinod Koul <[email protected]>
+
+Description:	SoundWire Slave DisCo properties.
+		These properties are defined by MIPI DisCo Specification
+		for SoundWire. They define various properties of the
+		SoundWire Slave and are used by the bus to configure
+		the Slave
+
+
+What:		/sys/bus/soundwire/devices/sdw:.../dp0/max_word
+		/sys/bus/soundwire/devices/sdw:.../dp0/min_word
+		/sys/bus/soundwire/devices/sdw:.../dp0/words
+		/sys/bus/soundwire/devices/sdw:.../dp0/BRA_flow_controlled
+		/sys/bus/soundwire/devices/sdw:.../dp0/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dp0/imp_def_interrupts
+
+Date:		May 2020
+
+Contact:	Pierre-Louis Bossart <[email protected]>
+		Bard Liao <[email protected]>
+		Vinod Koul <[email protected]>
+
+Description:	SoundWire Slave Data Port-0 DisCo properties.
+		These properties are defined by MIPI DisCo Specification
+		for the SoundWire. They define various properties of the
+		Data port 0 are used by the bus to configure the Data Port 0.
+
+
+What:		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_word
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/min_word
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/words
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/type
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_grouping
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/imp_def_interrupts
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/min_ch
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_ch
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/channels
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/ch_combinations
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_async_buffer
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/block_pack_mode
+		/sys/bus/soundwire/devices/sdw:.../dpN_src/port_encoding
+
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_word
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/min_word
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/words
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/type
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_grouping
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/imp_def_interrupts
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/min_ch
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_ch
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/channels
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_combinations
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_async_buffer
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/block_pack_mode
+		/sys/bus/soundwire/devices/sdw:.../dpN_sink/port_encoding
+
+Date:		May 2020
+
+Contact:	Pierre-Louis Bossart <[email protected]>
+		Bard Liao <[email protected]>
+		Vinod Koul <[email protected]>
+
+Description:	SoundWire Slave Data Source/Sink Port-N DisCo properties.
+		These properties are defined by MIPI DisCo Specification
+		for SoundWire. They define various properties of the
+		Source/Sink Data port N and are used by the bus to configure
+		the Data Port N.

Documentation/ABI/testing/sysfs-driver-habanalabs

@@ -10,6 +10,23 @@ KernelVersion:  5.1
 Contact:        [email protected]
 Description:    Version of the application running on the device's CPU
 
+What:           /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
+Date:           Jun 2019
+KernelVersion:  not yet upstreamed
+Contact:        [email protected]
+Description:    Allows the user to set the maximum clock frequency, in MHz.
+                The device clock might be set to lower value than the maximum.
+                The user should read the clk_cur_freq_mhz to see the actual
+                frequency value of the device clock. This property is valid
+                only for the Gaudi ASIC family
+
+What:           /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
+Date:           Jun 2019
+KernelVersion:  not yet upstreamed
+Contact:        [email protected]
+Description:    Displays the current frequency, in MHz, of the device clock.
+                This property is valid only for the Gaudi ASIC family
+
 What:           /sys/class/habanalabs/hl<n>/cpld_ver
 Date:           Jan 2019
 KernelVersion:  5.1