Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - some rework at the uAPI pixel format docs

 - the smiapp driver has started to gain support for MIPI CSS camera
   sensors and was renamed

 - two new sensor drivers: ov02a10 and ov9734

 - Meson gained a driver for the 2D acceleration unit

 - Rockchip rkisp1 driver was promoted from staging

 - Cedrus driver gained support for VP8

 - two new remote controller keymaps were added

 - the usual set of fixes cleanups and driver improvements

* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
  media: ccs: Add support for obtaining C-PHY configuration from firmware
  media: ccs-pll: Print pixel rates
  media: ccs: Print written register values
  media: ccs: Add support for DDR OP SYS and OP PIX clocks
  media: ccs-pll: Add support for DDR OP system and pixel clocks
  media: ccs: Dual PLL support
  media: ccs-pll: Add trivial dual PLL support
  media: ccs-pll: Separate VT divisor limit calculation from the rest
  media: ccs-pll: Fix VT post-PLL divisor calculation
  media: ccs-pll: Make VT divisors 16-bit
  media: ccs-pll: Rework bounds checks
  media: ccs-pll: Print relevant information on PLL tree
  media: ccs-pll: Better separate OP and VT sub-tree calculation
  media: ccs-pll: Check for derating and overrating, support non-derating sensors
  media: ccs-pll: Split off VT subtree calculation
  media: ccs-pll: Add C-PHY support
  media: ccs-pll: Add sanity checks
  media: ccs-pll: Add support flexible OP PLL pixel clock divider
  media: ccs-pll: Support two cycles per pixel on OP domain
  media: ccs-pll: Add support for extended input PLL clock divider
  ...

Documentation/admin-guide/media/rkisp1.rst

@@ -86,7 +86,7 @@ the driver through the rkisp_params node to improve image quality during a
 video stream.
 The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`, and
 userspace should set
-:ref:`V4L2_META_FMT_RK_ISP1_STAT_3A <v4l2-meta-fmt-stat-rkisp1>` as the
+:ref:`V4L2_META_FMT_RK_ISP1_STAT_3A <v4l2-meta-fmt-rk-isp1-stat-3a>` as the
 dataformat.
 
 .. _rkisp1_params:
@@ -100,7 +100,7 @@ and others.
 
 The buffer format is defined by struct :c:type:`rkisp1_params_cfg`, and
 userspace should set
-:ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-params-rkisp1>` as the
+:ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-rk-isp1-params>` as the
 dataformat.
 
 

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml

@@ -18,6 +18,8 @@ properties:
       - allwinner,sun7i-a20-video-engine
       - allwinner,sun8i-a33-video-engine
       - allwinner,sun8i-h3-video-engine
+      - allwinner,sun8i-v3s-video-engine
+      - allwinner,sun8i-r40-video-engine
       - allwinner,sun50i-a64-video-engine
       - allwinner,sun50i-h5-video-engine
       - allwinner,sun50i-h6-video-engine

Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic GE2D Acceleration Unit
+
+maintainers:
+  - Neil Armstrong <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-ge2d
+
+  interrupts:
+    minItems: 1
+
+  reg:
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    ge2d: ge2d@ff940000 {
+          compatible = "amlogic,axg-ge2d";
+          reg = <0xff940000 0x10000>;
+          interrupts = <150>;
+          clocks = <&clk_ge2d>;
+          resets = <&reset_ge2d>;
+    };

Documentation/devicetree/bindings/media/coda.yaml

@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/coda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Coda multi-standard codec IP
+
+maintainers:
+  - Philipp Zabel <[email protected]>
+
+description: |-
+  Coda codec IPs are present in i.MX SoCs in various versions,
+  called VPU (Video Processing Unit).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,imx27-vpu
+          - const: cnm,codadx6
+      - items:
+          - const: fsl,imx51-vpu
+          - const: cnm,codahx4
+      - items:
+          - const: fsl,imx53-vpu
+          - const: cnm,coda7541
+      - items:
+          - enum:
+              - fsl,imx6dl-vpu
+              - fsl,imx6q-vpu
+          - const: cnm,coda960
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PER clock
+      - description: AHB interface clock
+
+  clock-names:
+    items:
+      - const: per
+      - const: ahb
+
+  resets:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle pointing to the SRAM device node
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cnm,coda960
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: BIT processor interrupt
+            - description: JPEG unit interrupt
+
+        interrupt-names:
+          items:
+            - const: bit
+            - const: jpeg
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: BIT processor interrupt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6dl-vpu
+              - fsl,imx6q-vpu
+    then:
+      properties:
+        power-domains:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description: phandle pointing to the PU power domain
+          maxItems: 1
+
+examples:
+  - |
+    vpu: video-codec@63ff4000 {
+        compatible = "fsl,imx53-vpu", "cnm,coda7541";
+        reg = <0x63ff4000 0x1000>;
+        interrupts = <9>;
+        clocks = <&clks 63>, <&clks 63>;
+        clock-names = "per", "ahb";
+        iram = <&ocram>;
+    };