Adds AT90USB162 support (qmk#11570)

* at90usb162 support * fix missing bracket * Apply suggestions from code review Co-authored-by: Ryan <[email protected]> Co-authored-by: Ryan <[email protected]>
atamis · Jan 30, 2021 · d92ffd1 · d92ffd1
1 parent 3780ab3
commit d92ffd1
Show file tree

Hide file tree

Showing 19 changed files with 42 additions and 34 deletions.
diff --git a/bootloader.mk b/bootloader.mk
@@ -40,7 +40,7 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
     OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
+    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
     ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
@@ -50,7 +50,7 @@ endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
+    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
     ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
@@ -60,7 +60,7 @@ endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
+    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
     ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))

diff --git a/common_features.mk b/common_features.mk
@@ -222,7 +222,7 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
         $(error "$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
     endif
     OPT_DEFS += -DRGB_MATRIX_ENABLE
-ifneq (,$(filter $(MCU), atmega16u2 atmega32u2))
+ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 at90usb162))
     # ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines
     OPT_DEFS += -DLIB8_ATTINY
 endif

diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema
@@ -25,7 +25,7 @@
         },
         "processor": {
             "type": "string",
-            "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
+            "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
         },
         "board": {
             "type": "string",

diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md
@@ -9,6 +9,7 @@ The following use [LUFA](https://www.fourwalledcubicle.com/LUFA.php) as the USB
 * [ATmega16U2](https://www.microchip.com/wwwproducts/en/ATmega16U2) / [ATmega32U2](https://www.microchip.com/wwwproducts/en/ATmega32U2)
 * [ATmega16U4](https://www.microchip.com/wwwproducts/en/ATmega16U4) / [ATmega32U4](https://www.microchip.com/wwwproducts/en/ATmega32U4)
 * [AT90USB64](https://www.microchip.com/wwwproducts/en/AT90USB646) / [AT90USB128](https://www.microchip.com/wwwproducts/en/AT90USB1286)
+* [AT90USB162](https://www.microchip.com/wwwproducts/en/AT90USB162)
 
 Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/products/vusb/index.html) instead:
 

diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md
@@ -93,18 +93,18 @@ BACKLIGHT_DRIVER = pwm
 
 On AVR boards, QMK automatically decides which driver to use according to the following table:
 
-|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P|
-|-------------|-------------|-------------|-------------|---------|-----------|
-|`B1`         |             |             |             |         |Timer 1    |
-|`B2`         |             |             |             |         |Timer 1    |
-|`B5`         |Timer 1      |Timer 1      |             |         |           |
-|`B6`         |Timer 1      |Timer 1      |             |         |           |
-|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |           |
-|`C4`         |Timer 3      |             |             |         |           |
-|`C5`         |Timer 3      |             |Timer 1      |         |           |
-|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |           |
-|`D4`         |             |             |             |Timer 1  |           |
-|`D5`         |             |             |             |Timer 1  |           |
+|Backlight Pin|AT90USB64/128|AT90USB162|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P|
+|-------------|-------------|----------|-------------|-------------|---------|-----------|
+|`B1`         |             |          |             |             |         |Timer 1    |
+|`B2`         |             |          |             |             |         |Timer 1    |
+|`B5`         |Timer 1      |          |Timer 1      |             |         |           |
+|`B6`         |Timer 1      |          |Timer 1      |             |         |           |
+|`B7`         |Timer 1      |Timer 1   |Timer 1      |Timer 1      |         |           |
+|`C4`         |Timer 3      |          |             |             |         |           |
+|`C5`         |Timer 3      |Timer 1   |             |Timer 1      |         |           |
+|`C6`         |Timer 3      |Timer 1   |Timer 3      |Timer 1      |         |           |
+|`D4`         |             |          |             |             |Timer 1  |           |
+|`D5`         |             |          |             |             |Timer 1  |           |
 
 All other pins will use timer-assisted software PWM:
 

diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md
@@ -14,6 +14,7 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま
 * [ATmega16U2](https://www.microchip.com/wwwproducts/en/ATmega16U2) / [ATmega32U2](https://www.microchip.com/wwwproducts/en/ATmega32U2)
 * [ATmega16U4](https://www.microchip.com/wwwproducts/en/ATmega16U4) / [ATmega32U4](https://www.microchip.com/wwwproducts/en/ATmega32U4)
 * [AT90USB64](https://www.microchip.com/wwwproducts/en/AT90USB646) / [AT90USB128](https://www.microchip.com/wwwproducts/en/AT90USB1286)
+* [AT90USB162](https://www.microchip.com/wwwproducts/en/AT90USB162)
 
 組み込みの USB インターフェースを持たない、いくつかの MCU は代わりに [V-USB](https://www.obdev.at/products/vusb/index.html) を使います:
 

diff --git a/docs/spi_driver.md b/docs/spi_driver.md
@@ -6,12 +6,12 @@ The SPI Master drivers used in QMK have a set of common functions to allow porta
 
 No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` pins of your SPI devices to the matching pins on the MCU:
 
-|MCU            |`SS`|`SCK`|`MOSI`|`MISO`|
-|---------------|----|-----|------|------|
-|ATMega16/32U2/4|`B0`|`B1` |`B2`  |`B3`  |
-|AT90USB64/128  |`B0`|`B1` |`B2`  |`B3`  |
-|ATmega32A      |`B4`|`B7` |`B5`  |`B6`  |
-|ATmega328/P    |`B2`|`B5` |`B3`  |`B4`  |
+|MCU              |`SS`|`SCK`|`MOSI`|`MISO`|
+|-----------------|----|-----|------|------|
+|ATMega16/32U2/4  |`B0`|`B1` |`B2`  |`B3`  |
+|AT90USB64/128/162|`B0`|`B1` |`B2`  |`B3`  |
+|ATmega32A        |`B4`|`B7` |`B5`  |`B6`  |
+|ATmega328/P      |`B2`|`B5` |`B3`  |`B4`  |
 
 You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually.
 `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`.

diff --git a/drivers/avr/serial.c b/drivers/avr/serial.c
@@ -20,7 +20,7 @@
 
 #ifdef SOFT_SERIAL_PIN
 
-#    if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
+#    if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
 #        error serial.c is not supported for the currently selected MCU
 #    endif
 // if using ATmega32U4/2, AT90USBxxx I2C, can not use PD0 and PD1 in soft serial.
@@ -52,8 +52,8 @@
 #        define EICRx EICRA
 #    endif
 
-// ATmegaxxU2 specific config
-#    if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)
+// ATmegaxxU2/AT90USB162 specific config
+#    if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB162__)
 // PD4(INT5), PD6(INT6), PD7(INT7), PC7(INT4)
 #        if SOFT_SERIAL_PIN == D4
 #            define EIMSK_BIT _BV(INT5)

diff --git a/drivers/avr/spi_master.c b/drivers/avr/spi_master.c
@@ -20,7 +20,7 @@
 #include "quantum.h"
 #include "timer.h"
 
-#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #    define SPI_SCK_PIN B1
 #    define SPI_MOSI_PIN B2
 #    define SPI_MISO_PIN B3

diff --git a/drivers/avr/spi_master.h b/drivers/avr/spi_master.h
@@ -21,7 +21,7 @@
 typedef int16_t spi_status_t;
 
 // Hardware SS pin is defined in the header so that user code can refer to it
-#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #    define SPI_SS_PIN B0
 #elif defined(__AVR_ATmega32A__)
 #    define SPI_SS_PIN B4

diff --git a/drivers/avr/uart.c b/drivers/avr/uart.c
@@ -29,7 +29,7 @@
 
 #include "uart.h"
 
-#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #    define UDRn UDR1
 #    define UBRRnL UBRR1L
 #    define UCSRnA UCSR1A

diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py
@@ -11,7 +11,7 @@
 
 # Supported processor types
 CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
-LUFA_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None
+LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None
 VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85'
 
 # Common format strings

diff --git a/lib/python/qmk/os_helpers/linux/__init__.py b/lib/python/qmk/os_helpers/linux/__init__.py
@@ -48,6 +48,7 @@ def check_udev_rules():
             _udev_rule("03eb", "2ff3"),  # ATmega16U4
             _udev_rule("03eb", "2ff4"),  # ATmega32U4
             _udev_rule("03eb", "2ff9"),  # AT90USB64
+            _udev_rule("03eb", "2ffa"),  # AT90USB162
             _udev_rule("03eb", "2ffb")  # AT90USB128
         },
         'kiibohd': {_udev_rule("1c11", "b007")},

diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c
@@ -68,7 +68,7 @@
 #        define COMxx1 COM3A1
 #        define OCRxx OCR3A
 #    endif
-#elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
+#elif (defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
 #    define HARDWARE_PWM
 #    define ICRx ICR1
 #    define TCCRxA TCCR1A

diff --git a/quantum/config_common.h b/quantum/config_common.h
@@ -39,7 +39,7 @@
 #        define PIND_ADDRESS 0x9
 #        define PINE_ADDRESS 0xC
 #        define PINF_ADDRESS 0xF
-#    elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
+#    elif defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 #        define ADDRESS_BASE 0x00
 #        define PINB_ADDRESS 0x3
 #        define PINC_ADDRESS 0x6

diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c
@@ -37,6 +37,8 @@
 #ifndef DYNAMIC_KEYMAP_EEPROM_MAX_ADDR
 #    if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #        define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
+#    elif defined(__AVR_AT90USB162__)
+#        define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 511
 #    else
 #        define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 1023
 #    endif

diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk
@@ -279,7 +279,7 @@ ifneq ($(findstring STM32F411, $(MCU)),)
   DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
 endif
 
-ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
+ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
   PROTOCOL = LUFA
 
   # Processor frequency.
@@ -317,7 +317,7 @@ ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 a
   ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes))
     OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
   endif
-  ifneq (,$(filter $(MCU),atmega16u2 atmega32u2))
+  ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2))
     NO_I2C = yes
   endif
 endif

diff --git a/util/drivers.txt b/util/drivers.txt
@@ -11,4 +11,5 @@ libusb,ATmega32U2,03EB,2FF0,ddc2c572-cb6e-4f61-a6cc-1a5de941f063
 libusb,ATmega16U4,03EB,2FF3,3180d426-bf93-4578-a693-2efbc337da8e
 libusb,ATmega32U4,03EB,2FF4,5f9726fd-f9de-487a-9fbd-8b3524a7a56a
 libusb,AT90USB64,03EB,2FF9,c6a708ad-e97d-43cd-b04a-3180d737a71b
+libusb,AT90USB162,03EB,2FFA,ef8546f0-ef09-4e7c-8fc2-ffbae1dcd84a
 libusb,AT90USB128,03EB,2FFB,fd217df3-59d0-440a-a8f3-4c0c8c84daa3
diff --git a/util/udev/50-qmk.rules b/util/udev/50-qmk.rules
@@ -9,6 +9,8 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff3", TAG+="uacc
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess"
 ### AT90USB64
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff9", TAG+="uaccess"
+### AT90USB162
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffa", TAG+="uaccess"
 ### AT90USB128
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess"