Skip to content

Commit

Permalink
ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry
Browse files Browse the repository at this point in the history
This patch fixes the suspend & resume procedure to allow entry into the
low power states with some streams being active as a wake source - wake on
voice is a perfect example. The current implementation does not stop
the CORB/RIRB DMA and does not power down the HDA links. With firmware's
help, the platform has been able to still enter s0ix state on older
platforms, but the sequence is still incorrect, and the additional
driver actions are needed to ensure correct s0ix behaviour.

Signed-off-by: Marcin Rajwa <[email protected]>
Signed-off-by: Keyon Jie <[email protected]>
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
  • Loading branch information
mrajwa authored and broonie committed Jul 28, 2020
1 parent 950039f commit 195f101
Showing 1 changed file with 38 additions and 0 deletions.
38 changes: 38 additions & 0 deletions sound/soc/sof/intel/hda-dsp.c
Original file line number Diff line number Diff line change
Expand Up @@ -696,12 +696,35 @@ int hda_dsp_resume(struct snd_sof_dev *sdev)
.state = SOF_DSP_PM_D0,
.substate = SOF_HDA_DSP_PM_D0I0,
};
#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
struct hdac_bus *bus = sof_to_bus(sdev);
struct hdac_ext_link *hlink = NULL;
#endif
int ret;

/* resume from D0I3 */
if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) {
hda_codec_i915_display_power(sdev, true);

#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
/* power up links that were active before suspend */
list_for_each_entry(hlink, &bus->hlink_list, list) {
if (hlink->ref_count) {
ret = snd_hdac_ext_bus_link_power_up(hlink);
if (ret < 0) {
dev_dbg(sdev->dev,
"error %x in %s: failed to power up links",
ret, __func__);
return ret;
}
}
}

/* set up CORB/RIRB buffers if was on before suspend */
if (bus->cmd_dma_state)
snd_hdac_bus_init_cmd_io(bus);
#endif

/* Set DSP power state */
ret = snd_sof_dsp_set_power_state(sdev, &target_state);
if (ret < 0) {
Expand Down Expand Up @@ -808,6 +831,21 @@ int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state)
HDA_VS_INTEL_EM2_L1SEN,
HDA_VS_INTEL_EM2_L1SEN);

#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
/* stop the CORB/RIRB DMA if it is On */
if (bus->cmd_dma_state)
snd_hdac_bus_stop_cmd_io(bus);

/* no link can be powered in s0ix state */
ret = snd_hdac_ext_bus_link_power_down_all(bus);
if (ret < 0) {
dev_dbg(sdev->dev,
"error %d in %s: failed to power down links",
ret, __func__);
return ret;
}
#endif

/* enable the system waking up via IPC IRQ */
enable_irq_wake(pci->irq);
pci_save_state(pci);
Expand Down

0 comments on commit 195f101

Please sign in to comment.