Merge branch 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
 "A change to increase the default maximum stack size on parisc to 100MB
  and the ability to further increase the stack hard limit size at
  runtime with ulimit for newly started processes.

  The other patches fix compile warnings, utilize the Kbuild logic and
  cleanups the parisc arch code"

* 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: pci-dma: fix warning unused-function
  parisc/uapi: Use Kbuild logic to provide <asm/types.h>
  parisc: Make user stack size configurable
  parisc: Use _TIF_USER_WORK_MASK in entry.S
  parisc: Drop loops_per_jiffy from per_cpu struct

arch/parisc/include/asm/processor.h

@@ -45,15 +45,12 @@
 #define STACK_TOP	TASK_SIZE
 #define STACK_TOP_MAX	DEFAULT_TASK_SIZE
 
-/* Allow bigger stacks for 64-bit processes */
-#define STACK_SIZE_MAX	(USER_WIDE_MODE					\
-			 ? (1 << 30)	/* 1 GB */			\
-			 : (CONFIG_MAX_STACK_SIZE_MB*1024*1024))
-
 #endif
 
 #ifndef __ASSEMBLY__
 
+unsigned long calc_max_stack_size(unsigned long stack_max);
+
 /*
  * Data detected about CPUs at boot time which is the same for all CPU's.
  * HP boxes are SMP - ie identical processors.
@@ -97,7 +94,6 @@ struct cpuinfo_parisc {
 	unsigned long cpu_loc;      /* CPU location from PAT firmware */
 	unsigned int state;
 	struct parisc_device *dev;
-	unsigned long loops_per_jiffy;
 };
 
 extern struct system_cpuinfo_parisc boot_cpu_data;

arch/parisc/kernel/entry.S

@@ -887,7 +887,7 @@ intr_check_sig:
 	/* As above */
 	mfctl   %cr30,%r1
 	LDREG	TI_FLAGS(%r1),%r19
-	ldi	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), %r20
+	ldi	(_TIF_USER_WORK_MASK & ~_TIF_NEED_RESCHED), %r20
 	and,COND(<>)	%r19, %r20, %r0
 	b,n	intr_restore	/* skip past if we've nothing to do */
 
@@ -1810,7 +1810,7 @@ syscall_check_resched:
 	.import do_signal,code
 syscall_check_sig:
 	LDREG	TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
-	ldi	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), %r26
+	ldi	(_TIF_USER_WORK_MASK & ~_TIF_NEED_RESCHED), %r26
 	and,COND(<>)	%r19, %r26, %r0
 	b,n	syscall_restore	/* skip past if we've nothing to do */
 

arch/parisc/kernel/pci-dma.c

@@ -335,7 +335,7 @@ pcxl_free_range(unsigned long vaddr, size_t size)
 	dump_resmap();
 }
 
-static int proc_pcxl_dma_show(struct seq_file *m, void *v)
+static int __maybe_unused proc_pcxl_dma_show(struct seq_file *m, void *v)
 {
 #if 0
 	u_long i = 0;

arch/parisc/kernel/processor.c

@@ -163,7 +163,6 @@ static int __init processor_probe(struct parisc_device *dev)
 	if (cpuid)
 		memset(p, 0, sizeof(struct cpuinfo_parisc));
 
-	p->loops_per_jiffy = loops_per_jiffy;
 	p->dev = dev;		/* Save IODC data in case we need it */
 	p->hpa = dev->hpa.start;	/* save CPU hpa */
 	p->cpuid = cpuid;	/* save CPU id */
@@ -434,8 +433,8 @@ show_cpuinfo (struct seq_file *m, void *v)
 		show_cache_info(m);
 
 		seq_printf(m, "bogomips\t: %lu.%02lu\n",
-			     cpuinfo->loops_per_jiffy / (500000 / HZ),
-			     (cpuinfo->loops_per_jiffy / (5000 / HZ)) % 100);
+			     loops_per_jiffy / (500000 / HZ),
+			     loops_per_jiffy / (5000 / HZ) % 100);
 
 		seq_printf(m, "software id\t: %ld\n\n",
 				boot_cpu_data.pdc.model.sw_id);

arch/parisc/kernel/sys_parisc.c

@@ -53,6 +53,25 @@ static inline unsigned long COLOR_ALIGN(unsigned long addr,
 	return base + off;
 }
 
+
+#define STACK_SIZE_DEFAULT (USER_WIDE_MODE			\
+			? (1 << 30)	/* 1 GB */		\
+			: (CONFIG_STACK_MAX_DEFAULT_SIZE_MB*1024*1024))
+
+unsigned long calc_max_stack_size(unsigned long stack_max)
+{
+#ifdef CONFIG_COMPAT
+	if (!USER_WIDE_MODE && (stack_max == COMPAT_RLIM_INFINITY))
+		stack_max = STACK_SIZE_DEFAULT;
+	else
+#endif
+	if (stack_max == RLIM_INFINITY)
+		stack_max = STACK_SIZE_DEFAULT;
+
+	return stack_max;
+}
+
+
 /*
  * Top of mmap area (just below the process stack).
  */
@@ -69,8 +88,8 @@ static unsigned long mmap_upper_limit(struct rlimit *rlim_stack)
 	/* Limit stack size - see setup_arg_pages() in fs/exec.c */
 	stack_base = rlim_stack ? rlim_stack->rlim_max
 				: rlimit_max(RLIMIT_STACK);
-	if (stack_base > STACK_SIZE_MAX)
-		stack_base = STACK_SIZE_MAX;
+
+	stack_base = calc_max_stack_size(stack_base);
 
 	/* Add space for stack randomization. */
 	if (current->flags & PF_RANDOMIZE)

fs/exec.c

@@ -757,8 +757,8 @@ int setup_arg_pages(struct linux_binprm *bprm,
 #ifdef CONFIG_STACK_GROWSUP
 	/* Limit stack size */
 	stack_base = bprm->rlim_stack.rlim_max;
-	if (stack_base > STACK_SIZE_MAX)
-		stack_base = STACK_SIZE_MAX;
+
+	stack_base = calc_max_stack_size(stack_base);
 
 	/* Add space for stack randomization. */
 	stack_base += (STACK_RND_MASK << PAGE_SHIFT);

mm/Kconfig

@@ -720,19 +720,17 @@ config ZSMALLOC_STAT
 config GENERIC_EARLY_IOREMAP
 	bool
 
-config MAX_STACK_SIZE_MB
-	int "Maximum user stack size for 32-bit processes (MB)"
-	default 80
+config STACK_MAX_DEFAULT_SIZE_MB
+	int "Default maximum user stack size for 32-bit processes (MB)"
+	default 100
 	range 8 2048
 	depends on STACK_GROWSUP && (!64BIT || COMPAT)
 	help
 	  This is the maximum stack size in Megabytes in the VM layout of 32-bit
 	  user processes when the stack grows upwards (currently only on parisc
-	  arch). The stack will be located at the highest memory address minus
-	  the given value, unless the RLIMIT_STACK hard limit is changed to a
-	  smaller value in which case that is used.
+	  arch) when the RLIMIT_STACK hard limit is unlimited.
 
-	  A sane initial value is 80 MB.
+	  A sane initial value is 100 MB.
 
 config DEFERRED_STRUCT_PAGE_INIT
 	bool "Defer initialisation of struct pages to kthreads"