Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

A function in kernel/bpf/syscall.c which got a bug fix in 'net'
was moved to kernel/bpf/verifier.c in 'net-next'.

Signed-off-by: David S. Miller <[email protected]>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am335x-baltos.dtsi

@@ -371,6 +371,8 @@
 
 	phy1: ethernet-phy@1 {
 		reg = <7>;
+		eee-broken-100tx;
+		eee-broken-1000t;
 	};
 };
 

arch/arm/boot/dts/am335x-evmsk.dts

@@ -672,6 +672,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 

arch/arm/boot/dts/dra7.dtsi

@@ -283,6 +283,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <0>;
@@ -319,6 +320,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <1>;

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -121,7 +121,7 @@
 &i2c3 {
 	clock-frequency = <400000>;
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "atmel,24c64";
 		readonly;
 		reg = <0x50>;
 	};

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -66,12 +66,6 @@
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
-
-		opp@1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1320000>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
-		};
 	};
 
 	cpus {
@@ -81,16 +75,22 @@
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 

arch/arm/mach-omap2/common.h

@@ -270,6 +270,7 @@ extern const struct smp_operations omap4_smp_ops;
 extern int omap4_mpuss_init(void);
 extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
+extern u32 omap4_get_cpu1_ns_pa_addr(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)

arch/arm/mach-omap2/omap-hotplug.c

@@ -50,7 +50,7 @@ void omap4_cpu_die(unsigned int cpu)
 		omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
 
 		if (omap_secure_apis_support())
-			boot_cpu = omap_read_auxcoreboot0();
+			boot_cpu = omap_read_auxcoreboot0() >> 9;
 		else
 			boot_cpu =
 				readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5;

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -64,6 +64,7 @@
 #include "prm-regbits-44xx.h"
 
 static void __iomem *sar_base;
+static u32 old_cpu1_ns_pa_addr;
 
 #if defined(CONFIG_PM) && defined(CONFIG_SMP)
 
@@ -212,6 +213,11 @@ static void __init save_l2x0_context(void)
 {}
 #endif
 
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+	return old_cpu1_ns_pa_addr;
+}
+
 /**
  * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
  * The purpose of this function is to manage low power programming
@@ -460,22 +466,30 @@ int __init omap4_mpuss_init(void)
 void __init omap4_mpuss_early_init(void)
 {
 	unsigned long startup_pa;
+	void __iomem *ns_pa_addr;
 
-	if (!(cpu_is_omap44xx() || soc_is_omap54xx()))
+	if (!(soc_is_omap44xx() || soc_is_omap54xx()))
 		return;
 
 	sar_base = omap4_get_sar_ram_base();
 
-	if (cpu_is_omap443x())
+	/* Save old NS_PA_ADDR for validity checks later on */
+	if (soc_is_omap44xx())
+		ns_pa_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+	else
+		ns_pa_addr = sar_base + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+	old_cpu1_ns_pa_addr = readl_relaxed(ns_pa_addr);
+
+	if (soc_is_omap443x())
 		startup_pa = __pa_symbol(omap4_secondary_startup);
-	else if (cpu_is_omap446x())
+	else if (soc_is_omap446x())
 		startup_pa = __pa_symbol(omap4460_secondary_startup);
 	else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
 		startup_pa = __pa_symbol(omap5_secondary_hyp_startup);
 	else
 		startup_pa = __pa_symbol(omap5_secondary_startup);
 
-	if (cpu_is_omap44xx())
+	if (soc_is_omap44xx())
 		writel_relaxed(startup_pa, sar_base +
 			       CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
 	else

arch/arm/mach-omap2/omap-smc.S

@@ -94,6 +94,5 @@ ENTRY(omap_read_auxcoreboot0)
 	ldr	r12, =0x103
 	dsb
 	smc	#0
-	mov	r0, r0, lsr #9
 	ldmfd   sp!, {r2-r12, pc}
 ENDPROC(omap_read_auxcoreboot0)

arch/arm/mach-omap2/omap-smp.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
 
+#include <asm/sections.h>
 #include <asm/smp_scu.h>
 #include <asm/virt.h>
 
@@ -40,10 +41,14 @@
 
 #define OMAP5_CORE_COUNT	0x2
 
+#define AUX_CORE_BOOT0_GP_RELEASE	0x020
+#define AUX_CORE_BOOT0_HS_RELEASE	0x200
+
 struct omap_smp_config {
 	unsigned long cpu1_rstctrl_pa;
 	void __iomem *cpu1_rstctrl_va;
 	void __iomem *scu_base;
+	void __iomem *wakeupgen_base;
 	void *startup_addr;
 };
 
@@ -140,7 +145,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;
 	static struct powerdomain *cpu1_pwrdm;
-	void __iomem *base = omap_get_wakeupgen_base();
 
 	/*
 	 * Set synchronisation state between this boot processor
@@ -155,9 +159,11 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	if (omap_secure_apis_support())
-		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+		omap_modify_auxcoreboot0(AUX_CORE_BOOT0_HS_RELEASE,
+					 0xfffffdff);
 	else
-		writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(AUX_CORE_BOOT0_GP_RELEASE,
+			       cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
 
 	if (!cpu1_clkdm && !cpu1_pwrdm) {
 		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
@@ -261,9 +267,72 @@ static void __init omap4_smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
+/*
+ * For now, just make sure the start-up address is not within the booting
+ * kernel space as that means we just overwrote whatever secondary_startup()
+ * code there was.
+ */
+static bool __init omap4_smp_cpu1_startup_valid(unsigned long addr)
+{
+	if ((addr >= __pa(PAGE_OFFSET)) && (addr <= __pa(__bss_start)))
+		return false;
+
+	return true;
+}
+
+/*
+ * We may need to reset CPU1 before configuring, otherwise kexec boot can end
+ * up trying to use old kernel startup address or suspend-resume will
+ * occasionally fail to bring up CPU1 on 4430 if CPU1 fails to enter deeper
+ * idle states.
+ */
+static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c)
+{
+	unsigned long cpu1_startup_pa, cpu1_ns_pa_addr;
+	bool needs_reset = false;
+	u32 released;
+
+	if (omap_secure_apis_support())
+		released = omap_read_auxcoreboot0() & AUX_CORE_BOOT0_HS_RELEASE;
+	else
+		released = readl_relaxed(cfg.wakeupgen_base +
+					 OMAP_AUX_CORE_BOOT_0) &
+						AUX_CORE_BOOT0_GP_RELEASE;
+	if (released) {
+		pr_warn("smp: CPU1 not parked?\n");
+
+		return;
+	}
+
+	cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
+					OMAP_AUX_CORE_BOOT_1);
+	cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
+
+	/* Did the configured secondary_startup() get overwritten? */
+	if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
+		needs_reset = true;
+
+	/*
+	 * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
+	 * deeper idle state in WFI and will wake to an invalid address.
+	 */
+	if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
+	    !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
+		needs_reset = true;
+
+	if (!needs_reset || !c->cpu1_rstctrl_va)
+		return;
+
+	pr_info("smp: CPU1 parked within kernel, needs reset (0x%lx 0x%lx)\n",
+		cpu1_startup_pa, cpu1_ns_pa_addr);
+
+	writel_relaxed(1, c->cpu1_rstctrl_va);
+	readl_relaxed(c->cpu1_rstctrl_va);
+	writel_relaxed(0, c->cpu1_rstctrl_va);
+}
+
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void __iomem *base = omap_get_wakeupgen_base();
 	const struct omap_smp_config *c = NULL;
 
 	if (soc_is_omap443x())
@@ -281,6 +350,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	/* Must preserve cfg.scu_base set earlier */
 	cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa;
 	cfg.startup_addr = c->startup_addr;
+	cfg.wakeupgen_base = omap_get_wakeupgen_base();
 
 	if (soc_is_dra74x() || soc_is_omap54xx()) {
 		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
@@ -299,15 +369,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	if (cfg.scu_base)
 		scu_enable(cfg.scu_base);
 
-	/*
-	 * Reset CPU1 before configuring, otherwise kexec will
-	 * end up trying to use old kernel startup address.
-	 */
-	if (cfg.cpu1_rstctrl_va) {
-		writel_relaxed(1, cfg.cpu1_rstctrl_va);
-		readl_relaxed(cfg.cpu1_rstctrl_va);
-		writel_relaxed(0, cfg.cpu1_rstctrl_va);
-	}
+	omap4_smp_maybe_reset_cpu1(&cfg);
 
 	/*
 	 * Write the address of secondary startup routine into the
@@ -319,7 +381,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 		omap_auxcoreboot_addr(__pa_symbol(cfg.startup_addr));
 	else
 		writel_relaxed(__pa_symbol(cfg.startup_addr),
-			       base + OMAP_AUX_CORE_BOOT_1);
+			       cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
 }
 
 const struct smp_operations omap4_smp_ops __initconst = {

arch/arm/mach-omap2/omap_device.c

@@ -222,6 +222,14 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 				dev_err(dev, "failed to idle\n");
 		}
 		break;
+	case BUS_NOTIFY_BIND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
+		    pm_runtime_status_suspended(dev)) {
+			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
+			pm_runtime_set_active(dev);
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);

arch/arm/mach-orion5x/Kconfig

@@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X
 	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
+	select PHYLIB if NETDEVICES
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:

arch/arm/plat-orion/common.c

@@ -468,6 +468,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 		    eth_data, &orion_ge11);
 }
 
+#ifdef CONFIG_ARCH_ORION5X
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
@@ -480,6 +481,9 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 	struct mdio_board_info *bd;
 	unsigned int i;
 
+	if (!IS_BUILTIN(CONFIG_PHYLIB))
+		return;
+
 	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
 		if (!strcmp(d->port_names[i], "cpu"))
 			break;
@@ -493,6 +497,7 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 
 	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }
+#endif
 
 /*****************************************************************************
  * I2C

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -179,8 +179,10 @@
 		usbphy: phy@01c19400 {
 			compatible = "allwinner,sun50i-a64-usb-phy";
 			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
 			      <0x01c1b800 0x4>;
 			reg-names = "phy_ctrl",
+				    "pmu0",
 				    "pmu1";
 			clocks = <&ccu CLK_USB_PHY0>,
 				 <&ccu CLK_USB_PHY1>;