Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery'…

…, 'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2' into release

.mailmap

@@ -111,6 +111,7 @@ Uwe Kleine-König <[email protected]>
 Uwe Kleine-König <[email protected]>
 Uwe Kleine-König <[email protected]>
 Valdis Kletnieks <[email protected]>
+Viresh Kumar <[email protected]> <[email protected]>
 Takashi YOSHII <[email protected]>
 Yusuke Goda <[email protected]>
 Gustavo Padovan <[email protected]>

Documentation/ABI/testing/sysfs-block-rssd

@@ -1,26 +1,5 @@
-What:           /sys/block/rssd*/registers
-Date:           March 2012
-KernelVersion:  3.3
-Contact:        Asai Thambi S P <[email protected]>
-Description:    This is a read-only file. Dumps below driver information and
-                hardware registers.
-                    - S ACTive
-                    - Command Issue
-                    - Completed
-                    - PORT IRQ STAT
-                    - HOST IRQ STAT
-                    - Allocated
-                    - Commands in Q
-
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <[email protected]>
 Description:    This is a read-only file. Indicates the status of the device.
-
-What:           /sys/block/rssd*/flags
-Date:           May 2012
-KernelVersion:  3.5
-Contact:        Asai Thambi S P <[email protected]>
-Description:    This is a read-only file. Dumps the flags in port and driver
-                data structure

Documentation/ABI/testing/sysfs-bus-iio

@@ -219,6 +219,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -273,6 +274,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
 KernelVersion:	2.635
 Contact:	[email protected]
@@ -298,14 +300,19 @@ Description:
 		gives the 3dB frequency of the filter in Hz.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:	2.6.37
 Contact:	[email protected]
 Description:
 		Raw (unscaled, no bias etc.) output voltage for
 		channel Y.  The number must always be specified and
 		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:	2.6.37
 Contact:	[email protected]
 Description:
@@ -316,6 +323,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:	2.6.38
 Contact:	[email protected]
 Description:
@@ -330,6 +339,8 @@ Description:
 
 What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	[email protected]
 Description:
@@ -338,6 +349,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:	2.6.38
 Contact:	[email protected]
 Description:
@@ -346,6 +359,24 @@ Description:
 		normal operation. Y may be suppressed if all outputs are
 		controlled together.
 
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	[email protected]
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	[email protected]
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	[email protected]

Documentation/ABI/testing/sysfs-class-mtd

@@ -142,13 +142,14 @@ KernelVersion:	3.4
 Contact:	[email protected]
 Description:
 		This allows the user to examine and adjust the criteria by which
-		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
-		bit errors that were corrected on any single region comprising
-		an ecc step (as reported by the driver) equals or exceeds this
-		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
-		returned.  Higher layers (e.g., UBI) use this return code as an
-		indication that an erase block may be degrading and should be
-		scrutinized as a candidate for being marked as bad.
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
 
 		The initial value may be specified by the flash device driver.
 		If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@ Description:
 		block degradation, but high enough to avoid the consequences of
 		a persistent return value of -EUCLEAN on devices where sticky
 		bitflips occur.  Note that if bitflip_threshold exceeds
-		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		ecc_strength, -EUCLEAN is never returned by the read operations.
 		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
 		returned, absent a hard error.
 

Documentation/DocBook/media/v4l/controls.xml

@@ -3988,7 +3988,7 @@ interface and may change in the future.</para>
 	    from RGB to Y'CbCr color space.
 	    </entry>
 	  </row>
-	  <row id = "v4l2-jpeg-chroma-subsampling">
+	  <row>
 	    <entrytbl spanname="descr" cols="2">
 	      <tbody valign="top">
 		<row>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -986,13 +986,13 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
 	  <row id="V4L2-PIX-FMT-Y4">
 	    <entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
 	    <entry>'Y04 '</entry>
-	    <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+	    <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
 the other bits are set to 0.</entry>
 	  </row>
 	  <row id="V4L2-PIX-FMT-Y6">
 	    <entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
 	    <entry>'Y06 '</entry>
-	    <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+	    <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
 the other bits are set to 0.</entry>
 	  </row>
 	</tbody>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -560,14 +560,14 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-tuner;
     &sub-log-status;
     &sub-overlay;
+    &sub-prepare-buf;
     &sub-qbuf;
     &sub-querybuf;
     &sub-querycap;
     &sub-queryctrl;
     &sub-query-dv-preset;
     &sub-query-dv-timings;
     &sub-querystd;
-    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;

Documentation/DocBook/media/v4l/vidioc-create-bufs.xml

@@ -108,10 +108,9 @@ information.</para>
 /></entry>
 	  </row>
 	  <row>
-	    <entry>__u32</entry>
+	    <entry>struct&nbsp;v4l2_format</entry>
 	    <entry><structfield>format</structfield></entry>
-	    <entry>Filled in by the application, preserved by the driver.
-	    See <xref linkend="v4l2-format" />.</entry>
+	    <entry>Filled in by the application, preserved by the driver.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>

Documentation/DocBook/media/v4l/vidioc-dqevent.xml

@@ -89,7 +89,7 @@
 	  <row>
 	    <entry></entry>
 	    <entry>&v4l2-event-frame-sync;</entry>
-            <entry><structfield>frame</structfield></entry>
+            <entry><structfield>frame_sync</structfield></entry>
 	    <entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
 	  </row>
 	  <row>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -284,13 +284,6 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
-	    <entry>0x9d0000</entry>
-	    <entry>The class containing JPEG compression controls.
-These controls are described in <xref
-		linkend="jpeg-controls" />.</entry>
-	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/arm/SPEAr/overview.txt

@@ -60,4 +60,4 @@ Introduction
   Document Author
   ---------------
 
-  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+  Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics