Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Lots of overlapping changes.  Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.

Include a necessary change by Jakub Kicinski, with log message:

====================
cls_bpf no longer takes care of offload tracking.  Make sure
netdevsim performs necessary checks.  This fixes a warning
caused by TC trying to remove a filter it has not added.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
====================

Signed-off-by: David S. Miller <[email protected]>

Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

@@ -13,7 +13,6 @@ Required properties:
                  at25df321a
                  at25df641
                  at26df081a
-                 en25s64
                  mr25h128
                  mr25h256
                  mr25h10
@@ -33,7 +32,6 @@ Required properties:
                  s25fl008k
                  s25fl064k
                  sst25vf040b
-                 sst25wf040b
                  m25p40
                  m25p80
                  m25p16

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

@@ -12,24 +12,30 @@ Required properties:
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- cs-gpios : Specifies the gpio pins to be used for chipselects.
 - clocks : Clock specifiers for both ipg and per clocks.
 - clock-names : Clock names should include both "ipg" and "per"
 See the clock consumer binding,
 	Documentation/devicetree/bindings/clock/clock-bindings.txt
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-		Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
 
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
+Recommended properties:
+- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt.  While the native chip
+select lines can be used, they appear to always generate a pulse between each
+word of a transfer.  Most use cases will require GPIO based chip selects to
+generate a valid transaction.
 
 Optional properties:
+- num-cs :  Number of total chip selects, see spi-bus.txt.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: DMA request names, if present, should include "tx" and "rx".
 - fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
 controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
 the SPI_READY mode-flag needs to be set too.
 Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
 
+Obsolete properties:
+- fsl,spi-num-chipselects : Contains the number of the chipselect
+
 Example:
 
 ecspi@70010000 {

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arm/lib/csumpartialcopyuser.S

@@ -85,7 +85,11 @@
 		.pushsection .text.fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+		ldr	r5, [sp, #9*4]		@ *err_ptr
+#else
 		ldr	r5, [sp, #8*4]		@ *err_ptr
+#endif
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1

arch/arm64/kvm/hyp/debug-sr.c

@@ -74,6 +74,9 @@ static void __hyp_text __debug_save_spe_nvhe(u64 *pmscr_el1)
 {
 	u64 reg;
 
+	/* Clear pmscr in case of early return */
+	*pmscr_el1 = 0;
+
 	/* SPE present on this CPU? */
 	if (!cpuid_feature_extract_unsigned_field(read_sysreg(id_aa64dfr0_el1),
 						  ID_AA64DFR0_PMSVER_SHIFT))

arch/parisc/boot/compressed/misc.c

@@ -123,8 +123,8 @@ int puts(const char *s)
 	while ((nuline = strchr(s, '\n')) != NULL) {
 		if (nuline != s)
 			pdc_iodc_print(s, nuline - s);
-			pdc_iodc_print("\r\n", 2);
-			s = nuline + 1;
+		pdc_iodc_print("\r\n", 2);
+		s = nuline + 1;
 	}
 	if (*s != '\0')
 		pdc_iodc_print(s, strlen(s));

arch/parisc/include/asm/thread_info.h

@@ -35,7 +35,12 @@ struct thread_info {
 
 /* thread information allocation */
 
+#ifdef CONFIG_IRQSTACKS
+#define THREAD_SIZE_ORDER	2 /* PA-RISC requires at least 16k stack */
+#else
 #define THREAD_SIZE_ORDER	3 /* PA-RISC requires at least 32k stack */
+#endif
+
 /* Be sure to hunt all references to this down when you change the size of
  * the kernel stack */
 #define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)

arch/parisc/kernel/entry.S

@@ -878,9 +878,6 @@ ENTRY_CFI(syscall_exit_rfi)
 	STREG   %r19,PT_SR7(%r16)
 
 intr_return:
-	/* NOTE: Need to enable interrupts incase we schedule. */
-	ssm     PSW_SM_I, %r0
-
 	/* check for reschedule */
 	mfctl   %cr30,%r1
 	LDREG   TI_FLAGS(%r1),%r19	/* sched.h: TIF_NEED_RESCHED */
@@ -907,6 +904,11 @@ intr_check_sig:
 	LDREG	PT_IASQ1(%r16), %r20
 	cmpib,COND(=),n 0,%r20,intr_restore /* backward */
 
+	/* NOTE: We need to enable interrupts if we have to deliver
+	 * signals. We used to do this earlier but it caused kernel
+	 * stack overflows. */
+	ssm     PSW_SM_I, %r0
+
 	copy	%r0, %r25			/* long in_syscall = 0 */
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
@@ -958,6 +960,10 @@ intr_do_resched:
 	cmpib,COND(=)	0, %r20, intr_do_preempt
 	nop
 
+	/* NOTE: We need to enable interrupts if we schedule.  We used
+	 * to do this earlier but it caused kernel stack overflows. */
+	ssm     PSW_SM_I, %r0
+
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif

arch/parisc/kernel/hpmc.S

@@ -305,6 +305,7 @@ ENDPROC_CFI(os_hpmc)
 
 
 	__INITRODATA
+	.align 4
 	.export os_hpmc_size
 os_hpmc_size:
 	.word .os_hpmc_end-.os_hpmc

arch/parisc/kernel/unwind.c

@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/kallsyms.h>
 #include <linux/sort.h>
-#include <linux/sched.h>
 
 #include <linux/uaccess.h>
 #include <asm/assembly.h>

arch/parisc/lib/delay.c

@@ -16,9 +16,7 @@
 #include <linux/preempt.h>
 #include <linux/init.h>
 
-#include <asm/processor.h>
 #include <asm/delay.h>
-
 #include <asm/special_insns.h>    /* for mfctl() */
 #include <asm/processor.h> /* for boot_cpu_data */
 

arch/powerpc/net/bpf_jit_comp64.c

@@ -763,7 +763,8 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			func = (u8 *) __bpf_call_base + imm;
 
 			/* Save skb pointer if we need to re-cache skb data */
-			if (bpf_helper_changes_pkt_data(func))
+			if ((ctx->seen & SEEN_SKB) &&
+			    bpf_helper_changes_pkt_data(func))
 				PPC_BPF_STL(3, 1, bpf_jit_stack_local(ctx));
 
 			bpf_jit_emit_func_call(image, ctx, (u64)func);
@@ -772,7 +773,8 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			PPC_MR(b2p[BPF_REG_0], 3);
 
 			/* refresh skb cache */
-			if (bpf_helper_changes_pkt_data(func)) {
+			if ((ctx->seen & SEEN_SKB) &&
+			    bpf_helper_changes_pkt_data(func)) {
 				/* reload skb pointer to r3 */
 				PPC_BPF_LL(3, 1, bpf_jit_stack_local(ctx));
 				bpf_jit_emit_skb_loads(image, ctx);

arch/s390/net/bpf_jit_comp.c

@@ -55,8 +55,7 @@ struct bpf_jit {
 #define SEEN_LITERAL	8	/* code uses literals */
 #define SEEN_FUNC	16	/* calls C functions */
 #define SEEN_TAIL_CALL	32	/* code uses tail calls */
-#define SEEN_SKB_CHANGE	64	/* code changes skb data */
-#define SEEN_REG_AX	128	/* code uses constant blinding */
+#define SEEN_REG_AX	64	/* code uses constant blinding */
 #define SEEN_STACK	(SEEN_FUNC | SEEN_MEM | SEEN_SKB)
 
 /*
@@ -448,12 +447,12 @@ static void bpf_jit_prologue(struct bpf_jit *jit, u32 stack_depth)
 			EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0,
 				      REG_15, 152);
 	}
-	if (jit->seen & SEEN_SKB)
+	if (jit->seen & SEEN_SKB) {
 		emit_load_skb_data_hlen(jit);
-	if (jit->seen & SEEN_SKB_CHANGE)
 		/* stg %b1,ST_OFF_SKBP(%r0,%r15) */
 		EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15,
 			      STK_OFF_SKBP);
+	}
 }
 
 /*
@@ -983,8 +982,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		EMIT2(0x0d00, REG_14, REG_W1);
 		/* lgr %b0,%r2: load return value into %b0 */
 		EMIT4(0xb9040000, BPF_REG_0, REG_2);
-		if (bpf_helper_changes_pkt_data((void *)func)) {
-			jit->seen |= SEEN_SKB_CHANGE;
+		if ((jit->seen & SEEN_SKB) &&
+		    bpf_helper_changes_pkt_data((void *)func)) {
 			/* lg %b1,ST_OFF_SKBP(%r15) */
 			EMIT6_DISP_LH(0xe3000000, 0x0004, BPF_REG_1, REG_0,
 				      REG_15, STK_OFF_SKBP);

arch/sparc/mm/fault_32.c

@@ -113,7 +113,7 @@ show_signal_msg(struct pt_regs *regs, int sig, int code,
 	if (!printk_ratelimit())
 		return;
 
-	printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
+	printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x",
 	       task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 	       tsk->comm, task_pid_nr(tsk), address,
 	       (void *)regs->pc, (void *)regs->u_regs[UREG_I7],

arch/sparc/mm/fault_64.c

@@ -154,7 +154,7 @@ show_signal_msg(struct pt_regs *regs, int sig, int code,
 	if (!printk_ratelimit())
 		return;
 
-	printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
+	printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x",
 	       task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 	       tsk->comm, task_pid_nr(tsk), address,
 	       (void *)regs->tpc, (void *)regs->u_regs[UREG_I7],

arch/sparc/net/bpf_jit_comp_64.c

@@ -1245,14 +1245,16 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		u8 *func = ((u8 *)__bpf_call_base) + imm;
 
 		ctx->saw_call = true;
+		if (ctx->saw_ld_abs_ind && bpf_helper_changes_pkt_data(func))
+			emit_reg_move(bpf2sparc[BPF_REG_1], L7, ctx);
 
 		emit_call((u32 *)func, ctx);
 		emit_nop(ctx);
 
 		emit_reg_move(O0, bpf2sparc[BPF_REG_0], ctx);
 
-		if (bpf_helper_changes_pkt_data(func) && ctx->saw_ld_abs_ind)
-			load_skb_regs(ctx, bpf2sparc[BPF_REG_6]);
+		if (ctx->saw_ld_abs_ind && bpf_helper_changes_pkt_data(func))
+			load_skb_regs(ctx, L7);
 		break;
 	}
 

arch/um/kernel/trap.c

@@ -150,7 +150,7 @@ static void show_segv_info(struct uml_pt_regs *regs)
 	if (!printk_ratelimit())
 		return;
 
-	printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x",
+	printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 		tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
 		(void *)UPT_IP(regs), (void *)UPT_SP(regs),

arch/x86/entry/entry_32.S

@@ -941,7 +941,8 @@ ENTRY(debug)
 	movl	%esp, %eax			# pt_regs pointer
 
 	/* Are we currently on the SYSENTER stack? */
-	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+	movl	PER_CPU_VAR(cpu_entry_area), %ecx
+	addl	$CPU_ENTRY_AREA_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
 	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */
 	cmpl	$SIZEOF_SYSENTER_stack, %ecx
 	jb	.Ldebug_from_sysenter_stack
@@ -984,7 +985,8 @@ ENTRY(nmi)
 	movl	%esp, %eax			# pt_regs pointer
 
 	/* Are we currently on the SYSENTER stack? */
-	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+	movl	PER_CPU_VAR(cpu_entry_area), %ecx
+	addl	$CPU_ENTRY_AREA_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx
 	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */
 	cmpl	$SIZEOF_SYSENTER_stack, %ecx
 	jb	.Lnmi_from_sysenter_stack