The Wireless Microphone Analyzer shows the frequency spectrum captured with the "RF Explorer" or "tinySA" hardware. Wireless microphone vendors (e.g. Sennheiser, Shure etc.) have defined specific frequency ranges for their equipment which they gave proprietary names. This tool allows you to preselect these bands. E.g. if you bought a "Sennheiser EW 100 G3" in Sennheiser's E-Band, you can select this range in the app, to check whether and were there are any interferences. You can also also overlay the vendor recommended channel frequency presets, which are optimized by vendors and guarantee a intermodulation free operation of multiple microphones in parallel. The app also shows forbidden frequency ranges in red. E.g. LTE up-/downstream ranges which meanwhile overlap with old microphone frequency bands.
When starting the app, it automatically tries to detect the serial port to which the scanner hardware is attached to. Nevertheless you have to make sure that the correct hardware type is selected! If this doesn't work, you can open the "Port" menu and select the corresponding port manually. In case there is still no display, please restart the app or press <CTRL><R>. It looks like sometimes the serial ports are not detected properly by the underying Electron framework.
It is possible to show/hide each of the displayed graphs:
- Recommended manufacturer channels
- Forbidden ranges
- Congested / forbidden channels
- TV channels
by clicking the corresponding entry in the legend on top.
The following mouse/keyboard commands zoom/move the frequency range:
-
Mouse wheel scroll OR Arrow up/down zooms in/out of the waveform. Which means decreasing/increasing the span width of the spectrum analyzer
-
Mouse wheel tilt OR Arrow left/right moves the frequency range down-/upwards (when holding down freqency range shifts by 50%)
-
<CTRL> Arrow left/right toggles between vendor channel presets within the selected vendor specific frequency band.
Download and install the .exe installer. The required drivers for Windows can be found here: https://j3.rf-explorer.com/43-rfe/how-to
Download and install the .dmg package. Also make sure to download and install the necessary USB-Serial driver according to this guide: https://j3.rf-explorer.com/43-rfe/how-to/205-h2-macosx-drivers
IMPORTANT: For Catalina (MacOS 10.15) and later, make sure to download the latest USB-Serial driver! Older versions cannot be installed anymore due to Apple's security restrictions!
For all common Linux distribuitions the .AppImage can be used without any installation (like a portable applications on Windows).
For Linux distributions using Debian packages, a Debian package is available as well. Just download the .deb package and install it as follows:
sudo dpkg -i <package_name>.deb
If the command above fails, you might need to update the dependencies with:
sudo apt install -f
In order to run the tool as non-root, you have to add your username to the "dialout" group:
sudo gpasswd --add <your_username> dialout
IMPORTANT: After adding your username to the group you should reboot your system.
For Linux normally no special driver is required, as the corresponding driver is already included in most Linux distribuitions. In case you are on a different OS and the driver is missing in your installation, you can download it from here.