Merge tag 'mtd/fixes-for-5.16-rc5' of git://git.kernel.org/pub/scm/li…

…nux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
 "MTD fixes:

   - dataflash: Add device-tree SPI IDs to avoid new warnings

  Raw NAND fixes:

   - Fix nand_choose_best_timings() on unsupported interface

   - Fix nand_erase_op delay (wrong unit)

   - fsmc:
      - Fix timing computation
      - Take instruction delay into account

   - denali:
      - Add the dependency on HAS_IOMEM to silence robots"

* tag 'mtd/fixes-for-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: dataflash: Add device-tree SPI IDs
  mtd: rawnand: fsmc: Fix timing computation
  mtd: rawnand: fsmc: Take instruction delay into account
  mtd: rawnand: Fix nand_choose_best_timings() on unsupported interface
  mtd: rawnand: Fix nand_erase_op delay
  mtd: rawnand: denali: Add the dependency on HAS_IOMEM

drivers/mtd/devices/mtd_dataflash.c

@@ -96,6 +96,13 @@ struct dataflash {
 	struct mtd_info		mtd;
 };
 
+static const struct spi_device_id dataflash_dev_ids[] = {
+	{ "at45" },
+	{ "dataflash" },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, dataflash_dev_ids);
+
 #ifdef CONFIG_OF
 static const struct of_device_id dataflash_dt_ids[] = {
 	{ .compatible = "atmel,at45", },
@@ -927,6 +934,7 @@ static struct spi_driver dataflash_driver = {
 		.name		= "mtd_dataflash",
 		.of_match_table = of_match_ptr(dataflash_dt_ids),
 	},
+	.id_table = dataflash_dev_ids,
 
 	.probe		= dataflash_probe,
 	.remove		= dataflash_remove,

drivers/mtd/nand/raw/Kconfig

@@ -26,7 +26,7 @@ config MTD_NAND_DENALI_PCI
 config MTD_NAND_DENALI_DT
 	tristate "Denali NAND controller as a DT device"
 	select MTD_NAND_DENALI
-	depends on HAS_DMA && HAVE_CLK && OF
+	depends on HAS_DMA && HAVE_CLK && OF && HAS_IOMEM
 	help
 	  Enable the driver for NAND flash on platforms using a Denali NAND
 	  controller as a DT device.

drivers/mtd/nand/raw/fsmc_nand.c

@@ -15,6 +15,7 @@
 
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-direction.h>
 #include <linux/dma-mapping.h>
@@ -93,6 +94,14 @@
 
 #define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
 
+/*
+ * According to SPEAr300 Reference Manual (RM0082)
+ *  TOUDEL = 7ns (Output delay from the flip-flops to the board)
+ *  TINDEL = 5ns (Input delay from the board to the flipflop)
+ */
+#define TOUTDEL	7000
+#define TINDEL	5000
+
 struct fsmc_nand_timings {
 	u8 tclr;
 	u8 tar;
@@ -277,7 +286,7 @@ static int fsmc_calc_timings(struct fsmc_nand_data *host,
 {
 	unsigned long hclk = clk_get_rate(host->clk);
 	unsigned long hclkn = NSEC_PER_SEC / hclk;
-	u32 thiz, thold, twait, tset;
+	u32 thiz, thold, twait, tset, twait_min;
 
 	if (sdrt->tRC_min < 30000)
 		return -EOPNOTSUPP;
@@ -309,13 +318,6 @@ static int fsmc_calc_timings(struct fsmc_nand_data *host,
 	else if (tims->thold > FSMC_THOLD_MASK)
 		tims->thold = FSMC_THOLD_MASK;
 
-	twait = max(sdrt->tRP_min, sdrt->tWP_min);
-	tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1;
-	if (tims->twait == 0)
-		tims->twait = 1;
-	else if (tims->twait > FSMC_TWAIT_MASK)
-		tims->twait = FSMC_TWAIT_MASK;
-
 	tset = max(sdrt->tCS_min - sdrt->tWP_min,
 		   sdrt->tCEA_max - sdrt->tREA_max);
 	tims->tset = DIV_ROUND_UP(tset / 1000, hclkn) - 1;
@@ -324,6 +326,21 @@ static int fsmc_calc_timings(struct fsmc_nand_data *host,
 	else if (tims->tset > FSMC_TSET_MASK)
 		tims->tset = FSMC_TSET_MASK;
 
+	/*
+	 * According to SPEAr300 Reference Manual (RM0082) which gives more
+	 * information related to FSMSC timings than the SPEAr600 one (RM0305),
+	 *   twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL
+	 */
+	twait_min = sdrt->tCEA_max - ((tims->tset + 1) * hclkn * 1000)
+		    + TOUTDEL + TINDEL;
+	twait = max3(sdrt->tRP_min, sdrt->tWP_min, twait_min);
+
+	tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1;
+	if (tims->twait == 0)
+		tims->twait = 1;
+	else if (tims->twait > FSMC_TWAIT_MASK)
+		tims->twait = FSMC_TWAIT_MASK;
+
 	return 0;
 }
 
@@ -664,6 +681,9 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op,
 						instr->ctx.waitrdy.timeout_ms);
 			break;
 		}
+
+		if (instr->delay_ns)
+			ndelay(instr->delay_ns);
 	}
 
 	return ret;

drivers/mtd/nand/raw/nand_base.c

@@ -926,7 +926,7 @@ int nand_choose_best_sdr_timings(struct nand_chip *chip,
 				 struct nand_sdr_timings *spec_timings)
 {
 	const struct nand_controller_ops *ops = chip->controller->ops;
-	int best_mode = 0, mode, ret;
+	int best_mode = 0, mode, ret = -EOPNOTSUPP;
 
 	iface->type = NAND_SDR_IFACE;
 
@@ -977,7 +977,7 @@ int nand_choose_best_nvddr_timings(struct nand_chip *chip,
 				   struct nand_nvddr_timings *spec_timings)
 {
 	const struct nand_controller_ops *ops = chip->controller->ops;
-	int best_mode = 0, mode, ret;
+	int best_mode = 0, mode, ret = -EOPNOTSUPP;
 
 	iface->type = NAND_NVDDR_IFACE;
 
@@ -1837,7 +1837,7 @@ int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock)
 			NAND_OP_CMD(NAND_CMD_ERASE1, 0),
 			NAND_OP_ADDR(2, addrs, 0),
 			NAND_OP_CMD(NAND_CMD_ERASE2,
-				    NAND_COMMON_TIMING_MS(conf, tWB_max)),
+				    NAND_COMMON_TIMING_NS(conf, tWB_max)),
 			NAND_OP_WAIT_RDY(NAND_COMMON_TIMING_MS(conf, tBERS_max),
 					 0),
 		};