Merge tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc3, including fixes from wireless, can, and
  netfilter subtrees.

  Current merge window - bugs in new features:

   - can: isotp: isotp_rcv_cf(): enable RX timeout handling in
     listen-only mode

  Previous releases - regressions:

   - mac80211:
      - don't require VHT elements for HE on 2.4 GHz
      - fix regression where EAPOL frames were sent in plaintext

   - netfilter:
      - ipset: Update byte and packet counters regardless of whether
        they match

   - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
     inner packet has IP_DF (don't fragment) set in its header (when
     TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)

   - net: fec: fix MDIO probing for some FEC hardware blocks

   - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
     support

   - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
     platforms, sparse-related fix used the wrong integer size

  Previous releases - always broken:

   - netfilter: use actual socket sk rather than skb sk when routing
     harder

   - r8169: work around short packet hw bug on RTL8125 by padding frames

   - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
     advertisement, the hardware does not support it

   - chelsio/chtls: fix always leaking ctrl_skb and another leak caused
     by a race condition

   - fix drivers incorrectly writing into skbs on TX:
      - cadence: force nonlinear buffers to be cloned
      - gianfar: Account for Tx PTP timestamp in the skb headroom
      - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP

   - can: flexcan:
      - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
      - add ECC initialization for VF610 and LX2160A
      - flexcan_remove(): disable wakeup completely

   - can: fix packet echo functionality:
      - peak_canfd: fix echo management when loopback is on
      - make sure skbs are not freed in IRQ context in case they need to
        be dropped
      - always clone the skbs to make sure they have a reference on the
        socket, and prevent it from disappearing
      - fix real payload length return value for RTR frames

   - can: j1939: return failure on bind if netdev is down, rather than
     waiting indefinitely

  Misc:

   - IPv6: reply ICMP error if the first fragment don't include all
     headers to improve compliance with RFC 8200"

* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  ionic: check port ptr before use
  r8169: work around short packet hw bug on RTL8125
  net: openvswitch: silence suspicious RCU usage warning
  chelsio/chtls: fix always leaking ctrl_skb
  chelsio/chtls: fix memory leaks caused by a race
  can: flexcan: flexcan_remove(): disable wakeup completely
  can: flexcan: add ECC initialization for VF610
  can: flexcan: add ECC initialization for LX2160A
  can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
  can: mcp251xfd: remove unneeded break
  can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
  can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
  can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
  can: peak_usb: add range checking in decode operations
  can: xilinx_can: handle failure cases of pm_runtime_get_sync
  can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
  can: isotp: padlen(): make const array static, makes object smaller
  can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
  can: isotp: Explain PDU in CAN_ISOTP help text
  ...

Documentation/devicetree/bindings/net/can/can-controller.yaml

@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+  - Marc Kleine-Budde <[email protected]>
+
+properties:
+  $nodename:
+    pattern: "^can(@.*)?$"
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+  - Marc Kleine-Budde <[email protected]>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8qm-flexcan
+          - fsl,imx8mp-flexcan
+          - fsl,imx6q-flexcan
+          - fsl,imx53-flexcan
+          - fsl,imx35-flexcan
+          - fsl,imx28-flexcan
+          - fsl,imx25-flexcan
+          - fsl,p1010-flexcan
+          - fsl,vf610-flexcan
+          - fsl,ls1021ar2-flexcan
+          - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx7d-flexcan
+              - fsl,imx6ul-flexcan
+              - fsl,imx6sx-flexcan
+          - const: fsl,imx6q-flexcan
+      - items:
+          - enum:
+              - fsl,ls1028ar1-flexcan
+          - const: fsl,lx2160ar1-flexcan
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  clock-frequency:
+    description: |
+      The oscillator frequency driving the flexcan device, filled in by the
+      boot loader. This property should only be used the used operating system
+      doesn't support the clocks and clock-names property.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This means the registers of FlexCAN controller are big endian. This is
+      optional property.i.e. if this property is not present in device tree
+      node then controller is assumed to be little endian. If this property is
+      present then controller is assumed to be big endian.
+
+  fsl,stop-mode:
+    description: |
+      Register bits of stop mode control.
+
+      The format should be as follows:
+      <gpr req_gpr req_bit>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of CAN stop request.
+      req_bit is the bit offset of CAN stop request.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: The 'gpr' is the phandle to general purpose register node.
+      - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+        maximum: 0xff
+      - description: The 'req_bit' is the bit offset of CAN stop request.
+        maximum: 0x1f
+
+  fsl,clk-source:
+    description: |
+      Select the clock source to the CAN Protocol Engine (PE). It's SoC
+      implementation dependent. Refer to RM for detailed definition. If this
+      property is not set in device tree node then driver selects clock source 1
+      by default.
+      0: clock source 0 (oscillator clock)
+      1: clock source 1 (peripheral clock)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    minimum: 0
+    maximum: 1
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable CAN remote wakeup.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    can@1c000 {
+        compatible = "fsl,p1010-flexcan";
+        reg = <0x1c000 0x1000>;
+        interrupts = <48 0x2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <200000000>;
+        fsl,clk-source = <0>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+    };