Merge tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:

 - don't clear FLAG_IS_OUT when emulating open drain/source in gpiolib

 - fix up the usage of nonexclusive GPIO descriptors from device trees

 - fix the incorrect IEC offset when toggling trigger edge in the
   Spreadtrum driver

 - use the correct unit for debounce settings in the MAX77620 driver

* tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: max77620: Use correct unit for debounce times
  gpio: eic: sprd: Fix the incorrect EIC offset when toggling
  gpio: fix getting nonexclusive gpiods from DT
  gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source

drivers/gpio/gpio-eic-sprd.c

@@ -530,11 +530,12 @@ static void sprd_eic_handle_one_type(struct gpio_chip *chip)
 		}
 
 		for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
-			girq = irq_find_mapping(chip->irq.domain,
-					bank * SPRD_EIC_PER_BANK_NR + n);
+			u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
+
+			girq = irq_find_mapping(chip->irq.domain, offset);
 
 			generic_handle_irq(girq);
-			sprd_eic_toggle_trigger(chip, girq, n);
+			sprd_eic_toggle_trigger(chip, girq, offset);
 		}
 	}
 }

drivers/gpio/gpio-max77620.c

@@ -192,13 +192,13 @@ static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio,
 	case 0:
 		val = MAX77620_CNFG_GPIO_DBNC_None;
 		break;
-	case 1 ... 8:
+	case 1000 ... 8000:
 		val = MAX77620_CNFG_GPIO_DBNC_8ms;
 		break;
-	case 9 ... 16:
+	case 9000 ... 16000:
 		val = MAX77620_CNFG_GPIO_DBNC_16ms;
 		break;
-	case 17 ... 32:
+	case 17000 ... 32000:
 		val = MAX77620_CNFG_GPIO_DBNC_32ms;
 		break;
 	default:

drivers/gpio/gpiolib-of.c

@@ -317,7 +317,7 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
 	transitory = flags & OF_GPIO_TRANSITORY;
 
 	ret = gpiod_request(desc, label);
-	if (ret == -EBUSY && (flags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
+	if (ret == -EBUSY && (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
 		return desc;
 	if (ret)
 		return ERR_PTR(ret);

drivers/gpio/gpiolib.c

@@ -3070,24 +3070,39 @@ int gpiod_direction_output(struct gpio_desc *desc, int value)
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open drain by not actively driving the line high */
-		if (value)
-			return gpiod_direction_input(desc);
+		if (value) {
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
 		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
 				      PIN_CONFIG_DRIVE_OPEN_SOURCE);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open source by not actively driving the line low */
-		if (!value)
-			return gpiod_direction_input(desc);
+		if (!value) {
+			ret = gpiod_direction_input(desc);
+			goto set_output_flag;
+		}
 	} else {
 		gpio_set_config(gc, gpio_chip_hwgpio(desc),
 				PIN_CONFIG_DRIVE_PUSH_PULL);
 	}
 
 set_output_value:
 	return gpiod_direction_output_raw_commit(desc, value);
+
+set_output_flag:
+	/*
+	 * When emulating open-source or open-drain functionalities by not
+	 * actively driving the line (setting mode to input) we still need to
+	 * set the IS_OUT flag or otherwise we won't be able to set the line
+	 * value anymore.
+	 */
+	if (ret == 0)
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_output);
 
@@ -3448,8 +3463,6 @@ static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
 
 	if (value) {
 		ret = chip->direction_input(chip, offset);
-		if (!ret)
-			clear_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
 		ret = chip->direction_output(chip, offset, 0);
 		if (!ret)
@@ -3479,8 +3492,6 @@ static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value
 			set_bit(FLAG_IS_OUT, &desc->flags);
 	} else {
 		ret = chip->direction_input(chip, offset);
-		if (!ret)
-			clear_bit(FLAG_IS_OUT, &desc->flags);
 	}
 	trace_gpio_direction(desc_to_gpio(desc), !value, ret);
 	if (ret < 0)