NAME
    pgBadger - a fast PostgreSQL log analysis report

SYNOPSIS
    Usage: pgbadger [options] logfile [...]

            PostgreSQL log analyzer with fully detailed reports and graphs.

    Arguments:

        logfile can be a single log file, a list of files, or a shell command
        returning a list of files. If you want to pass log content from stdin
        use - as filename. Note that input from stdin will not work with csvlog.

    Options:

        -a | --average N       : number of minutes to build the average graphs
                                 of queries and connections. Default 5 minutes.
        -A | --histo-average N : number of minutes to build the histogram graphs
                                 of queries. Default 60 minutes.
        -b | --begin datetime  : start date/time for the data to be parsed in log.
        -B | --bar-graph       : use bar graph instead of line by default.
        -c | --dbclient host   : only report on entries for the given client host.
        -C | --nocomment       : remove comments like /* ... */ from queries.
        -d | --dbname database : only report on entries for the given database.
        -D | --dns-resolv      : client ip adresses are replaced by their DNS name.
                                 Be warned that this can really slow down pgBadger.
        -e | --end datetime    : end date/time for the data to be parsed in log.
        -f | --format logtype  : possible values: syslog, syslog2, stderr and csv.
                                 Default: stderr.
        -G | --nograph         : disable graphs on HTML output. Enabled by default.
        -h | --help            : show this message and exit.
        -i | --ident name      : programname used as syslog ident. Default: postgres
        -I | --incremental     : use incremental mode, reports will be generated by
                                 days in a separate directory, --outdir must be set.
        -j | --jobs number     : number of jobs to run at same time. Default is 1,
                                 run as single process.
        -J | --Jobs number     : number of log file to parse in parallel. Default
                                 is 1, run as single process.
        -l | --last-parsed file: allow incremental log parsing by registering the
                                 last datetime and line parsed. Useful if you want
                                 to watch errors since last run or if you want one
                                 report per day with a log rotated each week.
        -L | logfile-list file : file containing a list of log file to parse.
        -m | --maxlength size  : maximum length of a query, it will be restricted to
                                 the given size. Default: no truncate
        -M | --no-multiline    : do not collect multiline statement to avoid garbage
                                 especially on errors that generate a huge report.
        -n | --nohighlight     : disable SQL code highlighting.
        -N | --appname name    : only report on entries for given application name
        -o | --outfile filename: define the filename for the output. Default depends
                                 on the output format: out.html, out.txt, out.bin,
                                 out.json or out.tsung.
                                 With module JSON::XS installed, you can output file
                                 in JSON format either.
                                 To dump output to stdout use - as filename.
        -O | --outdir path     : directory where out file must be saved.
        -p | --prefix string   : the value of your custom log_line_prefix as
                                 defined in your postgresql.conf. Only use it if you
                                 aren't using one of the standard prefixes specified
                                 in the pgBadger documentation, such as if your
                                 prefix includes additional variables like client ip
                                 or application name. See examples below.
        -P | --no-prettify     : disable SQL queries prettify formatter.
        -q | --quiet           : don't print anything to stdout, not even a progress
                                 bar.
        -r | --remote-host ip  : set the host where to execute the cat command on
                                 remote logfile to parse localy the file.
        -R | --retention N     : number of week to keep in incremental mode. Default
                                 to 0, disabled. Used to set the number of weel to
                                 keep in output directory. Older weeks and days
                                 directory are automatically removed.
        -s | --sample number   : number of query samples to store. Default: 3.
        -S | --select-only     : only report SELECT queries.
        -t | --top number      : number of queries to store/display. Default: 20.
        -T | --title string    : change title of the HTML page report.
        -u | --dbuser username : only report on entries for the given user.
        -U | --exclude-user username : exclude entries for the specified user from
                                 report.
        -v | --verbose         : enable verbose or debug mode. Disabled by default.
        -V | --version         : show pgBadger version and exit.
        -w | --watch-mode      : only report errors just like logwatch could do.
        -x | --extension       : output format. Values: text, html, bin, json or
                                 tsung. Default: html
        -X | --extra-files     : in incremetal mode allow pgbadger to write CSS and
                                 JS files in the output directory as separate files.
        -z | --zcat exec_path  : set the full path to the zcat program. Use it if
                                 zcat or bzcat or unzip is not in your path.
        -Z | --timezone +/-XX  : Set the number of hour(s) from GMT of the timezone.
                                 Use this to adjust date/time in javascript graphs.
        --pie-limit num        : pie data lower than num% will show a sum instead.
        --exclude-query regex  : any query matching the given regex will be excluded
                                 from the report. For example: "^(VACUUM|COMMIT)"
                                 You can use this option multiple times.
        --exclude-file filename: path of the file which contains all the regex to
                                 use to exclude queries from the report. One regex
                                 per line.
        --include-query regex  : any query that does not match the given regex will
                                 be excluded from the report. You can use this
                                 option multiple times. For example: "(tbl1|tbl2)".
        --include-file filename: path of the file which contains all the regex of
                                 the queries to include from the report. One regex
                                 per line.
        --disable-error        : do not generate error report.
        --disable-hourly       : do not generate hourly report.
        --disable-type         : do not generate report of queries by type, database
                                 or user.
        --disable-query        : do not generate query reports (slowest, most
                                 frequent, queries by users, by database, ...).
        --disable-session      : do not generate session report.
        --disable-connection   : do not generate connection report.
        --disable-lock         : do not generate lock report.
        --disable-temporary    : do not generate temporary report.
        --disable-checkpoint   : do not generate checkpoint/restartpoint report.
        --disable-autovacuum   : do not generate autovacuum report.
        --charset              : used to set the HTML charset to be used.
                                 Default: utf-8.
        --csv-separator        : used to set the CSV field separator, default: ,
        --exclude-time  regex  : any timestamp matching the given regex will be
                                 excluded from the report. Example: "2013-04-12 .*"
                                 You can use this option multiple times.
        --exclude-appname name : exclude entries for the specified application name
                                 from report. Example: "pg_dump".
        --exclude-line regex   : pgbadger will start to exclude any log entry that
                                 will match the given regex. Can be used multiple
                                 time.
        --anonymize            : obscure all literals in queries, useful to hide
                                 confidential data.
        --noreport             : prevent pgbadger to create reports in incremental
                                 mode.
        --log-duration         : force pgbadger to associate log entries generated
                                 by both log_duration = on and log_statement = 'all'
        --enable-checksum      : used to add a md5 sum under each query report.
        --journalctl command   : command to use to replace PostgreSQL logfile by
                                 a call to journalctl. Basically it might be:
                                    journalctl -u postgresql-9.5
        --pid-dir dirpath      : set the path of the directory where the pid file
                                 will be written to be able to run two pgbadger at
                                 the same time.
        --rebuild              : used to rebuild all html reports in incremental
                                 output directories where there is binary data files.
        --pgbouncer-only       : only show pgbouncer related menu in the header.
        --start-monday         : in incremental mode, calendar's weeks start on
                                 sunday. Use this otpion to start on monday.

    pgBadger is able to parse a remote log file using a passwordless ssh
    connection. Use the -r or --remote-host to set the host ip address or
    hostname. There's also some additional options to fully control the ssh
    connection.

        --ssh-program ssh        path to the ssh program to use. Default: ssh.
        --ssh-user username      connection login name. Default to running user.
        --ssh-identity file      path to the identity file to use.
        --ssh-timeout second     timeout to ssh connection failure. Default 10 secs.
        --ssh-option  options    list of -o options to use for the ssh connection.
                                 Options always used:
                                     -o ConnectTimeout=$ssh_timeout
                                     -o PreferredAuthentications=hostbased,publickey

    Examples:

            pgbadger /var/log/postgresql.log
            pgbadger /var/log/postgres.log.2.gz /var/log/postgres.log.1.gz 
                           /var/log/postgres.log
            pgbadger /var/log/postgresql/postgresql-2012-05-*
            pgbadger --exclude-query="^(COPY|COMMIT)" /var/log/postgresql.log
            pgbadger -b "2012-06-25 10:56:11" -e "2012-06-25 10:59:11" 
                           /var/log/postgresql.log
            cat /var/log/postgres.log | pgbadger -
            # Log prefix with stderr log output
            pgbadger --prefix '%t [%p]: [%l-1] user=%u,db=%d,client=%h' 
                            /pglog/postgresql-2012-08-21*
            pgbadger --prefix '%m %u@%d %p %r %a : ' /pglog/postgresql.log
            # Log line prefix with syslog log output
            pgbadger --prefix 'user=%u,db=%d,client=%h,appname=%a' 
                            /pglog/postgresql-2012-08-21*
            # Use my 8 CPUs to parse my 10GB file faster, much faster
            pgbadger -j 8 /pglog/postgresql-9.1-main.log

    Generate Tsung sessions XML file with select queries only:

        pgbadger -S -o sessions.tsung --prefix '%t [%p]: [%l-1] user=%u,db=%d ' /pglog/postgresql-9.1.log

    Reporting errors every week by cron job:

        30 23 * * 1 /usr/bin/pgbadger -q -w /var/log/postgresql.log -o /var/reports/pg_errors.html

    Generate report every week using incremental behavior:

        0 4 * * 1 /usr/bin/pgbadger -q `find /var/log/ -mtime -7 -name "postgresql.log*"` 
            -o /var/reports/pg_errors-`date +%F`.html -l /var/reports/pgbadger_incremental_file.dat

    This supposes that your log file and HTML report are also rotated every
    week.

    Or better, use the auto-generated incremental reports:

        0 4 * * * /usr/bin/pgbadger -I -q /var/log/postgresql/postgresql.log.1 
            -O /var/www/pg_reports/

    will generate a report per day and per week.

    In incremental mode, you can also specify the number of week to keep in
    the reports:

        /usr/bin/pgbadger --retention 2 -I -q /var/log/postgresql/postgresql.log.1 
            -O /var/www/pg_reports/

    If you have a pg_dump at 23:00 and 13:00 each day during half an hour,
    you can use pgbadger as follow to exclude these period from the report:

        pgbadger --exclude-time "2013-09-.* (23|13):.*" postgresql.log

    This will help avoid having COPY statements, as generated by pg_dump, on
    top of the list of slowest queries. You can also use --exclude-appname
    "pg_dump" to solve this problem in a simpler way.

    You can also parse journalctl output just as if it was a log file:

        pgbadger --journalctl 'journalctl -u postgresql-9.5'

    or worst, call it from a remote host:

        pgbadger -r 192.168.1.159 --journalctl 'journalctl -u postgresql-9.5'

    you don't need to specify any log file at command line, but if you have
    others PostgreSQL log files to parse, you can add them as usual.

    To rebuild all incremantal html reports after, proceed as follow:

        rm /path/to/reports/*.js
        rm /path/to/reports/*.css
        pgbadger -X -I -O /path/to/reports/ --rebuild

    it will also update all ressources file (JS and CSS).

DESCRIPTION
    pgBadger is a PostgreSQL log analyzer built for speed with fully reports
    from your PostgreSQL log file. It's a single and small Perl script Perl
    script that outperforms any other PostgreSQL log analyzer.

    It is written in pure Perl and uses a javascript library (flotr2) to
    draw graphs so that you don't need to install any additional Perl
    modules or other packages. Furthermore, this library gives us more
    features such as zooming. pgBadger also uses the Bootstrap javascript
    library and the FontAwesome webfont for better design. Everything is
    embedded.

    pgBadger is able to autodetect your log file format (syslog, stderr or
    csvlog). It is designed to parse huge log files as well as gzip
    compressed files. See a complete list of features below. Supported
    compressed format are gzip, bzip2 and xz. For the xz format you must
    have an xz version upper than 5.05 that supports the --robot option.

    All charts are zoomable and can be saved as PNG images.

    You can also limit pgBadger to only report errors or remove any part of
    the report using command line options.

    pgBadger supports any custom format set into the log_line_prefix
    directive of your postgresql.conf file as long as it at least specify
    the %t and %p patterns.

    pgBadger allows parallel processing of a single log file or multiple
    files through the use of the -j option specifying the number of CPUs.

    If you want to save system performance you can also use log_duration
    instead of log_min_duration_statement to have reports on duration and
    number of queries only.

FEATURE
    pgBadger reports everything about your SQL queries:

            Overall statistics
            The most frequent waiting queries.
            Queries that waited the most.
            Queries generating the most temporary files.
            Queries generating the largest temporary files.
            The slowest queries.
            Queries that took up the most time.
            The most frequent queries.
            The most frequent errors.
            Histogram of query times.
            Histogram of sessions times.
            Users involved in top queries.
            Applications involved in top queries.
            Queries generating the most cancellation.
            Queries most cancelled.

    The following reports are also available with hourly charts divided into
    periods of five minutes:

            SQL queries statistics.
            Temporary file statistics.
            Checkpoints statistics.
            Autovacuum and autoanalyze statistics.
            Cancelled queries.
            Error events (panic, fatal, error and warning).

    There are also some pie charts about distribution of:

            Locks statistics.
            Queries by type (select/insert/update/delete).
            Distribution of queries type per database/application
            Sessions per database/user/client/application.
            Connections per database/user/client/application.
            Autovacuum and autoanalyze per table.
            Queries per user and total duration per user.

    All charts are zoomable and can be saved as PNG images. SQL queries
    reported are highlighted and beautified automatically.

    pgBadger is also able to parse pgbouncer log files and to create the
    following reports:

            Request Throughput
            Bytes I/O Throughput
            Queries Average duration
            Simultaneous sessions
            Histogram of sessions times
            Sessions per database
            Sessions per user
            Sessions per host
            Established connections
            Connections per database
            Connections per user
            Connections per host
            Most used reserved pools
            Most Frequent Errors/Events

    You can also have incremental reports with one report per day and a
    cumulative report per week. Two multiprocess modes are available to
    speed up log parsing, one using one core per log file, and the second
    using multiple cores to parse a single file. These modes can be
    combined.

    Histogram granularity can be adjusted using the -A command line option.
    By default they will report the mean of each top queries/errors occuring
    per hour, but you can specify the granularity down to the minute.

    pgBadger can also be used in a central place to parse remote log files
    using a passwordless SSH connection. This mode can be used with
    compressed files and in the multiprocess per file mode (-J) but can not
    be used with the CSV log format.

REQUIREMENT
    pgBadger comes as a single Perl script - you do not need anything other
    than a modern Perl distribution. Charts are rendered using a Javascript
    library so you don't need anything other than a web browser. Your
    browser will do all the work.

    If you planned to parse PostgreSQL CSV log files you might need some
    Perl Modules:

            Text::CSV_XS - to parse PostgreSQL CSV log files.

    This module is optional, if you don't have PostgreSQL log in the CSV
    format you don't need to install it.

    If you want to export statistics as JSON file you need an additional
    Perl module:

            JSON::XS - JSON serialising/deserialising, done correctly and fast

    This module is optional, if you don't select the json output format you
    don't need to install it.

    Compressed log file format is autodetected from the file exension. If
    pgBadger find a gz extension it will use the zcat utility, with a bz2
    extension it will use bzcat and if the file extension is zip or xz then
    the unzip or xz utilities will be used.

    If those utilities are not found in the PATH environment variable then
    use the --zcat command line option to change this path. For example:

            --zcat="/usr/local/bin/gunzip -c" or --zcat="/usr/local/bin/bzip2 -dc"
            --zcat="C:\tools\unzip -p"

    By default pgBadger will use the zcat, bzcat and unzip utilities
    following the file extension. If you use the default autodetection
    compress format you can mixed gz, bz2, xz or zip files. Specifying a
    custom value to --zcat option will remove this feature of mixed
    compressed format.

    Note that multiprocessing can not be used with compressed files or CSV
    files as well as under Windows platform.

INSTALLATION
    Download the tarball from github and unpack the archive as follow:

            tar xzf pgbadger-7.x.tar.gz
            cd pgbadger-7.x/
            perl Makefile.PL
            make && sudo make install

    This will copy the Perl script pgbadger to /usr/local/bin/pgbadger by
    default and the man page into /usr/local/share/man/man1/pgbadger.1.
    Those are the default installation directories for 'site' install.

    If you want to install all under /usr/ location, use INSTALLDIRS='perl'
    as an argument of Makefile.PL. The script will be installed into
    /usr/bin/pgbadger and the manpage into /usr/share/man/man1/pgbadger.1.

    For example, to install everything just like Debian does, proceed as
    follows:

            perl Makefile.PL INSTALLDIRS=vendor

    By default INSTALLDIRS is set to site.

POSTGRESQL CONFIGURATION
    You must enable and set some configuration directives in your
    postgresql.conf before starting.

    You must first enable SQL query logging to have something to parse:

            log_min_duration_statement = 0

    Here every statement will be logged, on a busy server you may want to
    increase this value to only log queries with a longer duration. Note
    that if you have log_statement set to 'all' nothing will be logged
    through the log_min_duration_statement directive. See the next chapter
    for more information.

    With 'stderr' log format, log_line_prefix must be at least:

            log_line_prefix = '%t [%p]: [%l-1] '

    Log line prefix could add user, database name, application name and
    client ip address as follows:

            log_line_prefix = '%t [%p]: [%l-1] user=%u,db=%d,app=%a,client=%h '

    or for syslog log file format:

            log_line_prefix = 'user=%u,db=%d,app=%aclient=%h '

    Log line prefix for stderr output could also be:

            log_line_prefix = '%t [%p]: [%l-1] db=%d,user=%u,app=%a,client=%h '

    or for syslog output:

            log_line_prefix = 'db=%d,user=%u,app=%a,client=%h '

    You need to enable other parameters in postgresql.conf to get more
    information from your log files:

            log_checkpoints = on
            log_connections = on
            log_disconnections = on
            log_lock_waits = on
            log_temp_files = 0
            log_autovacuum_min_duration = 0
            log_error_verbosity = default

    Do not enable log_statement as its log format will not be parsed by
    pgBadger.

    Of course your log messages should be in English without locale support:

            lc_messages='C'

    but this is not only recommended by pgBadger.

    Note: the session line [%l-1] is just used to match the default prefix
    for "stderr". The -1 has no real purpose and basically is not used in
    pgBadger statistics / graphs. You can safely remove them from the
    log_line_prefix but you will need to set the --prefix command line
    option accordingly.

log_min_duration_statement, log_duration and log_statement
    If you want the query statistics to include the actual query strings,
    you must set log_min_duration_statement to 0 or more milliseconds.

    If you just want to report duration and number of queries and don't want
    all details about queries, set log_min_duration_statement to -1 to
    disable it and enable log_duration in your postgresql.conf file. If you
    want to add the most common request report you can either choose to set
    log_min_duration_statement to a higher value or choose to enable
    log_statement.

    Enabling log_min_duration_statement will add reports about slowest
    queries and queries that took up the most time. Take care that if you
    have log_statement set to 'all' nothing will be logged with
    log_line_prefix.

PARALLEL PROCESSING
    To enable parallel processing you just have to use the -j N option where
    N is the number of cores you want to use.

    pgBadger will then proceed as follow:

            for each log file
                chunk size = int(file size / N)
                look at start/end offsets of these chunks
                fork N processes and seek to the start offset of each chunk
                    each process will terminate when the parser reach the end offset
                    of its chunk
                    each process write stats into a binary temporary file
               wait for all children has terminated
            All binary temporary files generated will then be read and loaded into
            memory to build the html output.

    With that method, at start/end of chunks pgBadger may truncate or omit a
    maximum of N queries per log file which is an insignificant gap if you
    have millions of queries in your log file. The chance that the query
    that you were looking for is lost is near 0, this is why I think this
    gap is livable. Most of the time the query is counted twice but
    truncated.

    When you have many small log files and many CPUs it is speedier to
    dedicate one core to one log file at a time. To enable this behavior you
    have to use option -J N instead. With 200 log files of 10MB each the use
    of the -J option starts being really interesting with 8 Cores. Using
    this method you will be sure not to lose any queries in the reports.

    He are a benchmarck done on a server with 8 CPUs and a single file of
    9.5GB.

             Option |  1 CPU  | 2 CPU | 4 CPU | 8 CPU
            --------+---------+-------+-------+------
               -j   | 1h41m18 | 50m25 | 25m39 | 15m58
               -J   | 1h41m18 | 54m28 | 41m16 | 34m45

    With 200 log files of 10MB each and a total of 2GB the results are
    slightly different:

             Option | 1 CPU | 2 CPU | 4 CPU | 8 CPU
            --------+-------+-------+-------+------
               -j   | 20m15 |  9m56 |  5m20 | 4m20
               -J   | 20m15 |  9m49 |  5m00 | 2m40

    So it is recommended to use -j unless you have hundreds of small log
    files and can use at least 8 CPUs.

    IMPORTANT: when you are using parallel parsing pgBadger will generate a
    lot of temporary files in the /tmp directory and will remove them at the
    end, so do not remove those files unless pgBadger is not running. They
    are all named with the following template tmp_pgbadgerXXXX.bin so they
    can be easily identified.

INCREMENTAL REPORTS
    pgBadger includes an automatic incremental report mode using option -I
    or --incremental. When running in this mode, pgBadger will generate one
    report per day and a cumulative report per week. Output is first done in
    binary format into the mandatory output directory (see option -O or
    --outdir), then in HTML format for daily and weekly reports with a main
    index file.

    The main index file will show a dropdown menu per week with a link to
    each week's report and links to daily reports of each week.

    For example, if you run pgBadger as follows based on a daily rotated
    file:

        0 4 * * * /usr/bin/pgbadger -I -q /var/log/postgresql/postgresql.log.1 \
            -O /var/www/pg_reports/

    you will have all daily and weekly reports for the full running period.

    In this mode pgBadger will create an automatic incremental file in the
    output directory, so you don't have to use the -l option unless you want
    to change the path of that file. This means that you can run pgBadger in
    this mode each day on a log file rotated each week, and it will not
    count the log entries twice.

    To save disk space you may want to use the -X or --extra-files command
    line option to force pgBadger to write javascript and css to separate
    files in the output directory. The resources will then be loaded using
    script and link tags.

BINARY FORMAT
    Using the binary format it is possible to create custom incremental and
    cumulative reports. For example, if you want to refresh a pgBadger
    report each hour from a daily PostgreSQL log file, you can proceed by
    running each hour the following commands:

        pgbadger --last-parsed .pgbadger_last_state_file -o sunday/hourX.bin /var/log/pgsql/postgresql-Sun.log

    to generate the incremental data files in binary format. And to generate
    the fresh HTML report from that binary file:

        pgbadger sunday/*.bin

    Or as another example, if you generate one log file per hour and you
    want reports to be rebuilt each time the log file is rotated, proceed as
    follows:

            pgbadger -o day1/hour01.bin /var/log/pgsql/pglog/postgresql-2012-03-23_10.log
            pgbadger -o day1/hour02.bin /var/log/pgsql/pglog/postgresql-2012-03-23_11.log
            pgbadger -o day1/hour03.bin /var/log/pgsql/pglog/postgresql-2012-03-23_12.log
            ...

    When you want to refresh the HTML report, for example each time after a
    new binary file is generated, just do the following:

            pgbadger -o day1_report.html day1/*.bin

    Adjust the commands to suit your particular needs.

JSON FORMAT
    JSON format is good for sharing data with other languages, which makes
    it easy to integrate pgBadger's result into other monitoring tools like
    Cacti or Graphite.

AUTHORS
    pgBadger is an original work from Gilles Darold.

    The pgBadger logo is an original creation of Damien Clochard.

    The pgBadger v4.x design comes from the "Art is code" company.

    This web site is a work of Gilles Darold.

    pgBadger is maintained by Gilles Darold, the good folks at Dalibo, and
    every one who wants to contribute.

    Many people have contributed to pgBadger, they are all quoted in the
    Changelog file.

LICENSE
    pgBadger is free software distributed under the PostgreSQL Licence.

    Copyright (c) 2012-2016, Dalibo

    A modified version of the SQL::Beautify Perl Module is embedded in
    pgBadger with copyright (C) 2009 by Jonas Kramer and is published under
    the terms of the Artistic License 2.0.