drivers: pwm_nrf5_sw: Extend to work also with DPPI

Instead of directly configuring PPI channels, use the GPPI helper
provided by nrfx. This allows using the driver on nRF53 an nRF91
Series where DPPI is available instead of PPI.

Signed-off-by: Andrzej Głąbek <[email protected]>

drivers/pwm/Kconfig.nrf5_sw

@@ -7,9 +7,9 @@ config PWM_NRF5_SW
 	bool "Nordic Semiconductor nRF5x series S/W PWM"
 	default y if !PWM_NRFX
 	depends on DT_HAS_NORDIC_NRF_SW_PWM_ENABLED
-	depends on DT_HAS_NORDIC_NRF_PPI_ENABLED
 	select NRFX_GPIOTE
-	select NRFX_PPI
+	select NRFX_PPI if HAS_HW_NRF_PPI
+	select NRFX_DPPI if HAS_HW_NRF_DPPIC
 	help
 	  Enable driver to utilize PWM on the Nordic Semiconductor nRF5x series.
 

drivers/pwm/pwm_nrf5_sw.c

@@ -10,7 +10,7 @@
 #include <zephyr/drivers/pwm.h>
 #include <zephyr/dt-bindings/gpio/gpio.h>
 #include <nrfx_gpiote.h>
-#include <nrfx_ppi.h>
+#include <helpers/nrfx_gppi.h>
 #include <hal/nrf_gpio.h>
 #include <hal/nrf_rtc.h>
 #include <hal/nrf_timer.h>
@@ -41,11 +41,17 @@ BUILD_ASSERT(DT_INST_PROP(0, clock_prescaler) == 0,
 #error "Invalid number of PWM channels configured."
 #endif
 
+#if defined(PPI_FEATURE_FORKS_PRESENT) || defined(DPPI_PRESENT)
+#define PPI_FORK_AVAILABLE 1
+#else
+#define PPI_FORK_AVAILABLE 0
+#endif
+
 /* When RTC is used, one more PPI task endpoint is required for clearing
  * the counter, so when FORK feature is not available, one more PPI channel
  * needs to be used.
  */
-#if USE_RTC && !defined(PPI_FEATURE_FORKS_PRESENT)
+#if USE_RTC && !PPI_FORK_AVAILABLE
 #define PPI_PER_CH 3
 #else
 #define PPI_PER_CH 2
@@ -165,7 +171,7 @@ static int pwm_nrf5_sw_set_cycles(const struct device *dev, uint32_t channel,
 	/* clear PPI used */
 	ppi_mask = BIT(ppi_chs[0]) | BIT(ppi_chs[1]) |
 		   (PPI_PER_CH > 2 ? BIT(ppi_chs[2]) : 0);
-	nrf_ppi_channels_disable(NRF_PPI, ppi_mask);
+	nrfx_gppi_channels_disable(ppi_mask);
 
 	active_level = (flags & PWM_POLARITY_INVERTED) ? 0 : 1;
 
@@ -265,15 +271,13 @@ static int pwm_nrf5_sw_set_cycles(const struct device *dev, uint32_t channel,
 			nrf_rtc_event_address_get(rtc,
 				nrf_rtc_compare_event_get(0));
 
-#if defined(PPI_FEATURE_FORKS_PRESENT)
-		nrf_ppi_fork_endpoint_setup(NRF_PPI,
-					    ppi_chs[1],
-					    clear_task_address);
+#if PPI_FORK_AVAILABLE
+		nrfx_gppi_fork_endpoint_setup(ppi_chs[1],
+					      clear_task_addr);
 #else
-		nrf_ppi_channel_endpoint_setup(NRF_PPI,
-					       ppi_chs[2],
-					       period_end_event_address,
-					       clear_task_address);
+		nrfx_gppi_channel_endpoints_setup(ppi_chs[2],
+						  period_end_event_address,
+						  clear_task_address);
 #endif
 	} else {
 		pulse_end_event_address =
@@ -284,15 +288,13 @@ static int pwm_nrf5_sw_set_cycles(const struct device *dev, uint32_t channel,
 				nrf_timer_compare_event_get(0));
 	}
 
-	nrf_ppi_channel_endpoint_setup(NRF_PPI,
-				       ppi_chs[0],
-				       pulse_end_event_address,
-				       pulse_end_task_address);
-	nrf_ppi_channel_endpoint_setup(NRF_PPI,
-				       ppi_chs[1],
-				       period_end_event_address,
-				       period_end_task_address);
-	nrf_ppi_channels_enable(NRF_PPI, ppi_mask);
+	nrfx_gppi_channel_endpoints_setup(ppi_chs[0],
+					  pulse_end_event_address,
+					  pulse_end_task_address);
+	nrfx_gppi_channel_endpoints_setup(ppi_chs[1],
+					  period_end_event_address,
+					  period_end_task_address);
+	nrfx_gppi_channels_enable(ppi_mask);
 
 	/* start timer, hence PWM */
 	if (USE_RTC) {
@@ -347,7 +349,7 @@ static int pwm_nrf5_sw_init(const struct device *dev)
 
 		/* Allocate resources. */
 		for (uint32_t j = 0; j < PPI_PER_CH; j++) {
-			err = nrfx_ppi_channel_alloc(&data->ppi_ch[i][j]);
+			err = nrfx_gppi_channel_alloc(&data->ppi_ch[i][j]);
 			if (err != NRFX_SUCCESS) {
 				/* Do not free allocated resource. It is a fatal condition,
 				 * system requires reconfiguration.