Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Fix sk_psock reference count leak on receive, from Xiyu Yang.

 2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.

 3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
    from Maciej Żenczykowski.

 4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
    Abeni.

 5) Fix netprio cgroup v2 leak, from Zefan Li.

 6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.

 7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.

 8) Various bpf probe handling fixes, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  selftests: mptcp: pm: rm the right tmp file
  dpaa2-eth: properly handle buffer size restrictions
  bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
  bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
  bpf: Restrict bpf_probe_read{, str}() only to archs where they work
  MAINTAINERS: Mark networking drivers as Maintained.
  ipmr: Add lockdep expression to ipmr_for_each_table macro
  ipmr: Fix RCU list debugging warning
  drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
  net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
  tcp: fix error recovery in tcp_zerocopy_receive()
  MAINTAINERS: Add Jakub to networking drivers.
  MAINTAINERS: another add of Karsten Graul for S390 networking
  drivers: ipa: fix typos for ipa_smp2p structure doc
  pppoe: only process PADT targeted at local interfaces
  selftests/bpf: Enforce returning 0 for fentry/fexit programs
  bpf: Enforce returning 0 for fentry/fexit progs
  net: stmmac: fix num_por initialization
  security: Fix the default value of secid_to_secctx hook
  libbpf: Fix register naming in PT_REGS s390 macros
  ...

Documentation/core-api/printk-formats.rst

@@ -112,6 +112,20 @@ used when printing stack backtraces. The specifier takes into
 consideration the effect of compiler optimisations which may occur
 when tail-calls are used and marked with the noreturn GCC attribute.
 
+Probed Pointers from BPF / tracing
+----------------------------------
+
+::
+
+	%pks	kernel string
+	%pus	user string
+
+The ``k`` and ``u`` specifiers are used for printing prior probed memory from
+either kernel memory (k) or user memory (u). The subsequent ``s`` specifier
+results in printing a string. For direct use in regular vsnprintf() the (k)
+and (u) annotation is ignored, however, when used out of BPF's bpf_trace_printk(),
+for example, it reads the memory it is pointing to without faulting.
+
 Kernel Pointers
 ---------------
 

MAINTAINERS

@@ -11710,8 +11710,9 @@ F:	net/core/drop_monitor.c
 
 NETWORKING DRIVERS
 M:	"David S. Miller" <[email protected]>
+M:	Jakub Kicinski <[email protected]>
 L:	[email protected]
-S:	Odd Fixes
+S:	Maintained
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
@@ -14634,6 +14635,7 @@ F:	drivers/iommu/s390-iommu.c
 
 S390 IUCV NETWORK LAYER
 M:	Julian Wiedmann <[email protected]>
+M:	Karsten Graul <[email protected]>
 M:	Ursula Braun <[email protected]>
 L:	[email protected]
 S:	Supported
@@ -14644,6 +14646,7 @@ F:	net/iucv/
 
 S390 NETWORK DRIVERS
 M:	Julian Wiedmann <[email protected]>
+M:	Karsten Graul <[email protected]>
 M:	Ursula Braun <[email protected]>
 L:	[email protected]
 S:	Supported

arch/arm/Kconfig

@@ -12,6 +12,7 @@ config ARM
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS

arch/arm/configs/keystone_defconfig

@@ -147,6 +147,7 @@ CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y

arch/arm/configs/omap2plus_defconfig

@@ -274,6 +274,7 @@ CONFIG_SPI_TI_QSPI=m
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
 CONFIG_SSI_PROTOCOL=m
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y

arch/arm64/Kconfig

@@ -20,6 +20,7 @@ config ARM64
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SETUP_DMA_OPS

arch/x86/Kconfig

@@ -68,6 +68,7 @@ config X86
 	select ARCH_HAS_KCOV			if X86_64
 	select ARCH_HAS_MEM_ENCRYPT
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_PTE_DEVMAP		if X86_64
 	select ARCH_HAS_PTE_SPECIAL

drivers/net/bareudp.c

@@ -136,25 +136,21 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 	oiph = skb_network_header(skb);
 	skb_reset_network_header(skb);
 
-	if (family == AF_INET)
+	if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
 		err = IP_ECN_decapsulate(oiph, skb);
-#if IS_ENABLED(CONFIG_IPV6)
 	else
 		err = IP6_ECN_decapsulate(oiph, skb);
-#endif
 
 	if (unlikely(err)) {
 		if (log_ecn_error) {
-			if  (family == AF_INET)
+			if  (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
 				net_info_ratelimited("non-ECT from %pI4 "
 						     "with TOS=%#x\n",
 						     &((struct iphdr *)oiph)->saddr,
 						     ((struct iphdr *)oiph)->tos);
-#if IS_ENABLED(CONFIG_IPV6)
 			else
 				net_info_ratelimited("non-ECT from %pI6\n",
 						     &((struct ipv6hdr *)oiph)->saddr);
-#endif
 		}
 		if (err > 1) {
 			++bareudp->dev->stats.rx_frame_errors;
@@ -350,7 +346,6 @@ static int bareudp_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	return err;
 }
 
-#if IS_ENABLED(CONFIG_IPV6)
 static int bareudp6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 			     struct bareudp_dev *bareudp,
 			     const struct ip_tunnel_info *info)
@@ -411,7 +406,6 @@ static int bareudp6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	dst_release(dst);
 	return err;
 }
-#endif
 
 static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
 {
@@ -435,11 +429,9 @@ static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	rcu_read_lock();
-#if IS_ENABLED(CONFIG_IPV6)
-	if (info->mode & IP_TUNNEL_INFO_IPV6)
+	if (IS_ENABLED(CONFIG_IPV6) && info->mode & IP_TUNNEL_INFO_IPV6)
 		err = bareudp6_xmit_skb(skb, dev, bareudp, info);
 	else
-#endif
 		err = bareudp_xmit_skb(skb, dev, bareudp, info);
 
 	rcu_read_unlock();
@@ -467,7 +459,7 @@ static int bareudp_fill_metadata_dst(struct net_device *dev,
 
 	use_cache = ip_tunnel_dst_cache_usable(skb, info);
 
-	if (ip_tunnel_info_af(info) == AF_INET) {
+	if (!IS_ENABLED(CONFIG_IPV6) || ip_tunnel_info_af(info) == AF_INET) {
 		struct rtable *rt;
 		__be32 saddr;
 
@@ -478,7 +470,6 @@ static int bareudp_fill_metadata_dst(struct net_device *dev,
 
 		ip_rt_put(rt);
 		info->key.u.ipv4.src = saddr;
-#if IS_ENABLED(CONFIG_IPV6)
 	} else if (ip_tunnel_info_af(info) == AF_INET6) {
 		struct dst_entry *dst;
 		struct in6_addr saddr;
@@ -492,7 +483,6 @@ static int bareudp_fill_metadata_dst(struct net_device *dev,
 
 		dst_release(dst);
 		info->key.u.ipv6.src = saddr;
-#endif
 	} else {
 		return -EINVAL;
 	}

drivers/net/dsa/dsa_loop.c

@@ -360,6 +360,7 @@ static void __exit dsa_loop_exit(void)
 }
 module_exit(dsa_loop_exit);
 
+MODULE_SOFTDEP("pre: dsa_loop_bdinfo");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Florian Fainelli");
 MODULE_DESCRIPTION("DSA loopback driver");

drivers/net/ethernet/broadcom/Kconfig

@@ -69,6 +69,7 @@ config BCMGENET
 	select BCM7XXX_PHY
 	select MDIO_BCM_UNIMAC
 	select DIMLIB
+	select BROADCOM_PHY if ARCH_BCM2835
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset.

drivers/net/ethernet/freescale/Kconfig

@@ -77,6 +77,7 @@ config UCC_GETH
 	depends on QUICC_ENGINE && PPC32
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	---help---
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 	  which is available on some Freescale SOCs.
@@ -90,6 +91,7 @@ config GIANFAR
 	depends on HAS_DMA
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	select CRC32
 	---help---
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,

drivers/net/ethernet/freescale/dpaa/Kconfig

@@ -3,6 +3,7 @@ menuconfig FSL_DPAA_ETH
 	tristate "DPAA Ethernet"
 	depends on FSL_DPAA && FSL_FMAN
 	select PHYLIB
+	select FIXED_PHY
 	select FSL_FMAN_MAC
 	---help---
 	  Data Path Acceleration Architecture Ethernet driver,

drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c

@@ -86,7 +86,7 @@ static void free_rx_fd(struct dpaa2_eth_priv *priv,
 	for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) {
 		addr = dpaa2_sg_get_addr(&sgt[i]);
 		sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 
 		free_pages((unsigned long)sg_vaddr, 0);
@@ -144,7 +144,7 @@ static struct sk_buff *build_frag_skb(struct dpaa2_eth_priv *priv,
 		/* Get the address and length from the S/G entry */
 		sg_addr = dpaa2_sg_get_addr(sge);
 		sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr);
-		dma_unmap_page(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, sg_addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 
 		sg_length = dpaa2_sg_get_len(sge);
@@ -185,7 +185,7 @@ static struct sk_buff *build_frag_skb(struct dpaa2_eth_priv *priv,
 				(page_address(page) - page_address(head_page));
 
 			skb_add_rx_frag(skb, i - 1, head_page, page_offset,
-					sg_length, DPAA2_ETH_RX_BUF_SIZE);
+					sg_length, priv->rx_buf_size);
 		}
 
 		if (dpaa2_sg_is_final(sge))
@@ -211,7 +211,7 @@ static void free_bufs(struct dpaa2_eth_priv *priv, u64 *buf_array, int count)
 
 	for (i = 0; i < count; i++) {
 		vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]);
-		dma_unmap_page(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, buf_array[i], priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		free_pages((unsigned long)vaddr, 0);
 	}
@@ -335,7 +335,7 @@ static u32 run_xdp(struct dpaa2_eth_priv *priv,
 		break;
 	case XDP_REDIRECT:
 		dma_unmap_page(priv->net_dev->dev.parent, addr,
-			       DPAA2_ETH_RX_BUF_SIZE, DMA_BIDIRECTIONAL);
+			       priv->rx_buf_size, DMA_BIDIRECTIONAL);
 		ch->buf_count--;
 		xdp.data_hard_start = vaddr;
 		err = xdp_do_redirect(priv->net_dev, &xdp, xdp_prog);
@@ -374,7 +374,7 @@ static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv,
 	trace_dpaa2_rx_fd(priv->net_dev, fd);
 
 	vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-	dma_sync_single_for_cpu(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+	dma_sync_single_for_cpu(dev, addr, priv->rx_buf_size,
 				DMA_BIDIRECTIONAL);
 
 	fas = dpaa2_get_fas(vaddr, false);
@@ -393,13 +393,13 @@ static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv,
 			return;
 		}
 
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		skb = build_linear_skb(ch, fd, vaddr);
 	} else if (fd_format == dpaa2_fd_sg) {
 		WARN_ON(priv->xdp_prog);
 
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		skb = build_frag_skb(priv, ch, buf_data);
 		free_pages((unsigned long)vaddr, 0);
@@ -974,7 +974,7 @@ static int add_bufs(struct dpaa2_eth_priv *priv,
 		if (!page)
 			goto err_alloc;
 
-		addr = dma_map_page(dev, page, 0, DPAA2_ETH_RX_BUF_SIZE,
+		addr = dma_map_page(dev, page, 0, priv->rx_buf_size,
 				    DMA_BIDIRECTIONAL);
 		if (unlikely(dma_mapping_error(dev, addr)))
 			goto err_map;
@@ -984,7 +984,7 @@ static int add_bufs(struct dpaa2_eth_priv *priv,
 		/* tracing point */
 		trace_dpaa2_eth_buf_seed(priv->net_dev,
 					 page, DPAA2_ETH_RX_BUF_RAW_SIZE,
-					 addr, DPAA2_ETH_RX_BUF_SIZE,
+					 addr, priv->rx_buf_size,
 					 bpid);
 	}
 
@@ -1720,7 +1720,7 @@ static bool xdp_mtu_valid(struct dpaa2_eth_priv *priv, int mtu)
 	int mfl, linear_mfl;
 
 	mfl = DPAA2_ETH_L2_MAX_FRM(mtu);
-	linear_mfl = DPAA2_ETH_RX_BUF_SIZE - DPAA2_ETH_RX_HWA_SIZE -
+	linear_mfl = priv->rx_buf_size - DPAA2_ETH_RX_HWA_SIZE -
 		     dpaa2_eth_rx_head_room(priv) - XDP_PACKET_HEADROOM;
 
 	if (mfl > linear_mfl) {
@@ -2462,6 +2462,11 @@ static int set_buffer_layout(struct dpaa2_eth_priv *priv)
 	else
 		rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN;
 
+	/* We need to ensure that the buffer size seen by WRIOP is a multiple
+	 * of 64 or 256 bytes depending on the WRIOP version.
+	 */
+	priv->rx_buf_size = ALIGN_DOWN(DPAA2_ETH_RX_BUF_SIZE, rx_buf_align);
+
 	/* tx buffer */
 	buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE;
 	buf_layout.pass_timestamp = true;
@@ -3126,7 +3131,7 @@ static int bind_dpni(struct dpaa2_eth_priv *priv)
 	pools_params.num_dpbp = 1;
 	pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id;
 	pools_params.pools[0].backup_pool = 0;
-	pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE;
+	pools_params.pools[0].buffer_size = priv->rx_buf_size;
 	err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params);
 	if (err) {
 		dev_err(dev, "dpni_set_pools() failed\n");

drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h

@@ -382,6 +382,7 @@ struct dpaa2_eth_priv {
 	u16 tx_data_offset;
 
 	struct fsl_mc_device *dpbp_dev;
+	u16 rx_buf_size;
 	u16 bpid;
 	struct iommu_domain *iommu_domain;
 

drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c

@@ -635,7 +635,7 @@ static int num_rules(struct dpaa2_eth_priv *priv)
 
 static int update_cls_rule(struct net_device *net_dev,
 			   struct ethtool_rx_flow_spec *new_fs,
-			   int location)
+			   unsigned int location)
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
 	struct dpaa2_eth_cls_rule *rule;

drivers/net/ethernet/hisilicon/Kconfig

@@ -64,7 +64,7 @@ config HNS_MDIO
 	  the PHY
 
 config HNS
-	tristate "Hisilicon Network Subsystem Support (Framework)"
+	tristate
 	---help---
 	  This selects the framework support for Hisilicon Network Subsystem. It
 	  is needed by any driver which provides HNS acceleration engine or make