drm/msm/dsi: Add skeleton 10nm PHY/PLL code

Add new 10nm DSI PLL/PHY files that will be used on SDM845.

Just populate empty pll/phy funcs for now. These will be filled up
later.

Signed-off-by: Archit Taneja <[email protected]>
Signed-off-by: Rob Clark <[email protected]>

drivers/gpu/drm/msm/Kconfig

@@ -94,3 +94,10 @@ config DRM_MSM_DSI_14NM_PHY
 	default y
 	help
 	  Choose this option if DSI PHY on 8996 is used on the platform.
+
+config DRM_MSM_DSI_10NM_PHY
+	bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if DSI PHY on SDM845 is used on the platform.

drivers/gpu/drm/msm/Makefile

@@ -83,12 +83,14 @@ msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
 msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/phy/dsi_phy_14nm.o
+msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/phy/dsi_phy_10nm.o
 
 ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
 msm-y += dsi/pll/dsi_pll.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
 msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o
+msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o
 endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o

drivers/gpu/drm/msm/dsi/dsi.h

@@ -36,6 +36,7 @@ enum msm_dsi_phy_type {
 	MSM_DSI_PHY_20NM,
 	MSM_DSI_PHY_28NM_8960,
 	MSM_DSI_PHY_14NM,
+	MSM_DSI_PHY_10NM,
 	MSM_DSI_PHY_MAX
 };
 

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

@@ -394,6 +394,10 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
 	{ .compatible = "qcom,dsi-phy-14nm",
 	  .data = &dsi_phy_14nm_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
+	{ .compatible = "qcom,dsi-phy-10nm",
+	  .data = &dsi_phy_10nm_cfgs },
 #endif
 	{}
 };

drivers/gpu/drm/msm/dsi/phy/dsi_phy.h

@@ -48,6 +48,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_pre;

drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c

@@ -0,0 +1,52 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018, The Linux Foundation
+ */
+
+#include <linux/iopoll.h>
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+			       struct msm_dsi_phy_clk_request *clk_req)
+{
+	return 0;
+}
+
+static void dsi_10nm_phy_disable(struct msm_dsi_phy *phy)
+{
+}
+
+static int dsi_10nm_phy_init(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+
+	phy->lane_base = msm_ioremap(pdev, "dsi_phy_lane",
+				     "DSI_PHY_LANE");
+	if (IS_ERR(phy->lane_base)) {
+		dev_err(&pdev->dev, "%s: failed to map phy lane base\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
+	.type = MSM_DSI_PHY_10NM,
+	.src_pll_truthtable = { {false, false}, {true, false} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vdds", 36000, 32},
+		},
+	},
+	.ops = {
+		.enable = dsi_10nm_phy_enable,
+		.disable = dsi_10nm_phy_disable,
+		.init = dsi_10nm_phy_init,
+	},
+	.io_start = { 0xae94400, 0xae96400 },
+	.num_dsi_phy = 2,
+};

drivers/gpu/drm/msm/dsi/pll/dsi_pll.c

@@ -166,6 +166,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
 	case MSM_DSI_PHY_14NM:
 		pll = msm_dsi_pll_14nm_init(pdev, id);
 		break;
+	case MSM_DSI_PHY_10NM:
+		pll = msm_dsi_pll_10nm_init(pdev, id);
+		break;
 	default:
 		pll = ERR_PTR(-ENXIO);
 		break;

drivers/gpu/drm/msm/dsi/pll/dsi_pll.h

@@ -115,5 +115,14 @@ msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
 	return ERR_PTR(-ENODEV);
 }
 #endif
+#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
+struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id);
+#else
+static inline struct msm_dsi_pll *
+msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
 #endif /* __DSI_PLL_H__ */
 

drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c

@@ -0,0 +1,176 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018, The Linux Foundation
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/iopoll.h>
+
+#include "dsi_pll.h"
+#include "dsi.xml.h"
+
+struct dsi_pll_10nm {
+	struct msm_dsi_pll base;
+
+	int id;
+	struct platform_device *pdev;
+
+	void __iomem *phy_cmn_mmio;
+	void __iomem *mmio;
+
+	int vco_delay;
+
+	enum msm_dsi_phy_usecase uc;
+	struct dsi_pll_10nm *slave;
+};
+
+#define to_pll_10nm(x)	container_of(x, struct dsi_pll_10nm, base)
+
+/*
+ * Global list of private DSI PLL struct pointers. We need this for Dual DSI
+ * mode, where the master PLL's clk_ops needs access the slave's private data
+ */
+static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX];
+
+static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate,
+	    parent_rate);
+
+	return 0;
+}
+
+static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+	u64 vco_rate = 0x0;
+
+	DBG("DSI PLL%d returning vco rate = %lu", pll_10nm->id,
+	    (unsigned long)vco_rate);
+
+	return (unsigned long)vco_rate;
+}
+
+static const struct clk_ops clk_ops_dsi_pll_10nm_vco = {
+	.round_rate = msm_dsi_pll_helper_clk_round_rate,
+	.set_rate = dsi_pll_10nm_vco_set_rate,
+	.recalc_rate = dsi_pll_10nm_vco_recalc_rate,
+	.prepare = msm_dsi_pll_helper_clk_prepare,
+	.unprepare = msm_dsi_pll_helper_clk_unprepare,
+};
+
+/*
+ * PLL Callbacks
+ */
+
+static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+}
+
+static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+
+	return 0;
+}
+
+static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll,
+				    enum msm_dsi_phy_usecase uc)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+
+	return 0;
+}
+
+static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll,
+				     struct clk **byte_clk_provider,
+				     struct clk **pixel_clk_provider)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+
+	if (byte_clk_provider)
+		*byte_clk_provider = NULL;
+	if (pixel_clk_provider)
+		*pixel_clk_provider = NULL;
+
+	return 0;
+}
+
+static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll)
+{
+	struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll);
+
+	DBG("DSI PLL%d", pll_10nm->id);
+}
+
+static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
+{
+	return 0;
+}
+
+struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
+{
+	struct dsi_pll_10nm *pll_10nm;
+	struct msm_dsi_pll *pll;
+	int ret;
+
+	if (!pdev)
+		return ERR_PTR(-ENODEV);
+
+	pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL);
+	if (!pll_10nm)
+		return ERR_PTR(-ENOMEM);
+
+	DBG("DSI PLL%d", id);
+
+	pll_10nm->pdev = pdev;
+	pll_10nm->id = id;
+	pll_10nm_list[id] = pll_10nm;
+
+	pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+	if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) {
+		dev_err(&pdev->dev, "failed to map CMN PHY base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
+	if (IS_ERR_OR_NULL(pll_10nm->mmio)) {
+		dev_err(&pdev->dev, "failed to map PLL base\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pll = &pll_10nm->base;
+	pll->min_rate = 1000000000UL;
+	pll->max_rate = 3500000000UL;
+	pll->get_provider = dsi_pll_10nm_get_provider;
+	pll->destroy = dsi_pll_10nm_destroy;
+	pll->save_state = dsi_pll_10nm_save_state;
+	pll->restore_state = dsi_pll_10nm_restore_state;
+	pll->set_usecase = dsi_pll_10nm_set_usecase;
+
+	pll_10nm->vco_delay = 1;
+
+	ret = pll_10nm_register(pll_10nm);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	return pll;
+}