Merge tag 'devicetree-fixes-for-4.5-2' of git://git.kernel.org/pub/sc…

…m/linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

 - Fix irq msi-map calculation for nonzero rid-base.

 - Binding doc updates for GICv3, fsl-imx-uart, and S3C RTC.

* tag 'devicetree-fixes-for-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  rtc: s3c: Document required clocks in the DT binding
  serial: fsl-imx-uart: Fix typo in fsl,dte-mode description
  dt-bindings: arm, gic-v3: require that reserved cells are always 0
  of/irq: Fix msi-map calculation for nonzero rid-base

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -14,11 +14,17 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
 	rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.

drivers/of/irq.c

@@ -635,6 +635,13 @@ static u32 __of_msi_map_rid(struct device *dev, struct device_node **np,
 		msi_base = be32_to_cpup(msi_map + 2);
 		rid_len = be32_to_cpup(msi_map + 3);
 
+		if (rid_base & ~map_mask) {
+			dev_err(parent_dev,
+				"Invalid msi-map translation - msi-map-mask (0x%x) ignores rid-base (0x%x)\n",
+				map_mask, rid_base);
+			return rid_out;
+		}
+
 		msi_controller_node = of_find_node_by_phandle(phandle);
 
 		matched = (masked_rid >= rid_base &&
@@ -654,7 +661,7 @@ static u32 __of_msi_map_rid(struct device *dev, struct device_node **np,
 	if (!matched)
 		return rid_out;
 
-	rid_out = masked_rid + msi_base;
+	rid_out = masked_rid - rid_base + msi_base;
 	dev_dbg(dev,
 		"msi-map at: %s, using mask %08x, rid-base: %08x, msi-base: %08x, length: %08x, rid: %08x -> %08x\n",
 		dev_name(parent_dev), map_mask, rid_base, msi_base,