Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/phy/aquantia/aquantia.h
  2193437 ("net: phy: aquantia: add missing include guards")
  61578f6 ("net: phy: aquantia: add support for PHY LEDs")

drivers/net/ethernet/wangxun/libwx/wx_hw.c
  bd07a98 ("net: txgbe: remove separate irq request for MSI and INTx")
  b501d26 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/[email protected]/

include/linux/mlx5/mlx5_ifc.h
  048a403 ("net/mlx5: IFC updates for changing max EQs")
  99be561 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/[email protected]/

Adjacent changes:

drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
  4130c67 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
  3f31265 ("wifi: iwlwifi: mvm: add mvm-specific guard")

include/net/mac80211.h
  816c6be ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
  5a009b4 ("wifi: mac80211: track changes in AP's TPE")

Signed-off-by: Jakub Kicinski <[email protected]>

Documentation/admin-guide/kernel-parameters.txt

@@ -788,25 +788,6 @@
 			Documentation/networking/netconsole.rst for an
 			alternative.
 
-		<DEVNAME>:<n>.<n>[,options]
-			Use the specified serial port on the serial core bus.
-			The addressing uses DEVNAME of the physical serial port
-			device, followed by the serial core controller instance,
-			and the serial port instance. The options are the same
-			as documented for the ttyS addressing above.
-
-			The mapping of the serial ports to the tty instances
-			can be viewed with:
-
-			$ ls -d /sys/bus/serial-base/devices/*:*.*/tty/*
-			/sys/bus/serial-base/devices/00:04:0.0/tty/ttyS0
-
-			In the above example, the console can be addressed with
-			console=00:04:0.0. Note that a console addressed this
-			way will only get added when the related device driver
-			is ready. The use of an earlycon parameter in addition to
-			the console may be desired for console output early on.
-
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio16,<addr>[,options]

Documentation/driver-api/cxl/memory-devices.rst

@@ -328,6 +328,12 @@ CXL Memory Device
 .. kernel-doc:: drivers/cxl/mem.c
    :doc: cxl mem
 
+.. kernel-doc:: drivers/cxl/cxlmem.h
+   :internal:
+
+.. kernel-doc:: drivers/cxl/core/memdev.c
+   :identifiers:
+
 CXL Port
 --------
 .. kernel-doc:: drivers/cxl/port.c
@@ -341,6 +347,15 @@ CXL Core
 .. kernel-doc:: drivers/cxl/cxl.h
    :internal:
 
+.. kernel-doc:: drivers/cxl/core/hdm.c
+   :doc: cxl core hdm
+
+.. kernel-doc:: drivers/cxl/core/hdm.c
+   :identifiers:
+
+.. kernel-doc:: drivers/cxl/core/cdat.c
+   :identifiers:
+
 .. kernel-doc:: drivers/cxl/core/port.c
    :doc: cxl core
 

Documentation/kbuild/modules.rst

@@ -128,7 +128,7 @@ executed to make module versioning work.
 
 	modules_install
 		Install the external module(s). The default location is
-		/lib/modules/<kernel_release>/extra/, but a prefix may
+		/lib/modules/<kernel_release>/updates/, but a prefix may
 		be added with INSTALL_MOD_PATH (discussed in section 5).
 
 	clean
@@ -417,7 +417,7 @@ directory:
 
 And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra/
+	/lib/modules/$(KERNELRELEASE)/updates/
 
 5.1 INSTALL_MOD_PATH
 --------------------
@@ -438,10 +438,10 @@ And external modules are installed in:
 -------------------
 
 	External modules are by default installed to a directory under
-	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	/lib/modules/$(KERNELRELEASE)/updates/, but you may wish to
 	locate modules for a specific functionality in a separate
 	directory. For this purpose, use INSTALL_MOD_DIR to specify an
-	alternative name to "extra."::
+	alternative name to "updates."::
 
 		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
 		       M=$PWD modules_install

Documentation/userspace-api/ioctl/ioctl-number.rst

@@ -186,6 +186,7 @@ Code  Seq#    Include File                                           Comments
 'Q'   all    linux/soundcard.h
 'R'   00-1F  linux/random.h                                          conflict!
 'R'   01     linux/rfkill.h                                          conflict!
+'R'   20-2F  linux/trace_mmap.h
 'R'   C0-DF  net/bluetooth/rfcomm.h
 'R'   E0     uapi/linux/fsl_mc.h
 'S'   all    linux/cdrom.h                                           conflict!

MAINTAINERS

@@ -1044,7 +1044,7 @@ M:	Joerg Roedel <[email protected]>
 R:	Suravee Suthikulpanit <[email protected]>
 L:	[email protected]
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux.git
 F:	drivers/iommu/amd/
 F:	include/linux/amd-iommu.h
 
@@ -11157,7 +11157,7 @@ M:	David Woodhouse <[email protected]>
 M:	Lu Baolu <[email protected]>
 L:	[email protected]
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux.git
 F:	drivers/iommu/intel/
 
 INTEL IPU3 CSI-2 CIO2 DRIVER
@@ -11530,7 +11530,7 @@ IOMMU DMA-API LAYER
 M:	Robin Murphy <[email protected]>
 L:	[email protected]
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux.git
 F:	drivers/iommu/dma-iommu.c
 F:	drivers/iommu/dma-iommu.h
 F:	drivers/iommu/iova.c
@@ -11542,7 +11542,7 @@ M:	Will Deacon <[email protected]>
 R:	Robin Murphy <[email protected]>
 L:	[email protected]
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux.git
 F:	Documentation/devicetree/bindings/iommu/
 F:	Documentation/userspace-api/iommu.rst
 F:	drivers/iommu/
@@ -19324,7 +19324,7 @@ F:	drivers/perf/riscv_pmu_legacy.c
 F:	drivers/perf/riscv_pmu_sbi.c
 
 RISC-V THEAD SoC SUPPORT
-M:	Jisheng Zhang <[email protected]>
+M:	Drew Fustini <[email protected]>
 M:	Guo Ren <[email protected]>
 M:	Fu Wei <[email protected]>
 L:	[email protected]

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Baby Opossum Posse
 
 # *DOCUMENTATION*

arch/arm/boot/dts/rockchip/rk3066a.dtsi

@@ -128,6 +128,7 @@
 		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
 		power-domains = <&power RK3066_PD_VIO>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {

arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts

@@ -5,6 +5,8 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/leds/common.h>
 #include "rk3308.dtsi"
 
 / {
@@ -24,17 +26,21 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+		pinctrl-0 = <&green_led>, <&heartbeat_led>;
 
 		green-led {
+			color = <LED_COLOR_ID_GREEN>;
 			default-state = "on";
+			function = LED_FUNCTION_POWER;
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:green:power";
 			linux,default-trigger = "default-on";
 		};
 
 		blue-led {
+			color = <LED_COLOR_ID_BLUE>;
 			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:blue:user";
 			linux,default-trigger = "heartbeat";
@@ -126,10 +132,12 @@
 };
 
 &emmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
+	cap-sd-highspeed;
+	no-sdio;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
 	vmmc-supply = <&vcc_io>;
 	status = "okay";
 };
@@ -214,11 +222,11 @@
 	pinctrl-0 = <&rtc_32k>;
 
 	leds {
-		green_led_gio: green-led-gpio {
+		green_led: green-led {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		heartbeat_led_gpio: heartbeat-led-gpio {
+		heartbeat_led: heartbeat-led {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm64/boot/dts/rockchip/rk3308.dtsi

@@ -811,7 +811,7 @@
 		clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
 			 <&cru SCLK_I2S2_8CH_RX_OUT>,
 			 <&cru PCLK_ACODEC>;
-		reset-names = "codec-reset";
+		reset-names = "codec";
 		resets = <&cru SRST_ACODEC_P>;
 		#sound-dai-cells = <0>;
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts

@@ -241,8 +241,8 @@
 	rk805: pmic@18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk805-clkout2";
 		gpio-controller;

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -793,6 +793,7 @@
 		dma-names = "tx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -804,6 +805,7 @@
 		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
 		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -817,6 +819,7 @@
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s_8ch_bus>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

@@ -450,7 +450,7 @@ ap_i2c_audio: &i2c8 {
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;

arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

@@ -289,7 +289,7 @@
 				regulator-name = "vdd_gpu";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-ramp-delay = <6001>;
 

arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts

@@ -444,6 +444,7 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;

arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts

@@ -435,6 +435,7 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;

arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts

@@ -383,6 +383,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;

arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi

@@ -344,6 +344,11 @@
 	};
 };
 
+&pwm0 {
+	pinctrl-0 = <&pwm0m1_pins>;
+	pinctrl-names = "default";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8_s0>;
 	status = "okay";

arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts

@@ -288,9 +288,9 @@
 	pinctrl-0 = <&i2c7m0_xfer>;
 	status = "okay";
 
-	es8316: audio-codec@11 {
+	es8316: audio-codec@10 {
 		compatible = "everest,es8316";
-		reg = <0x11>;
+		reg = <0x10>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;

arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts

@@ -366,6 +366,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
@@ -393,6 +394,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;

arch/arm64/include/asm/pgtable-hwdef.h

@@ -170,6 +170,7 @@
 #define PTE_CONT		(_AT(pteval_t, 1) << 52)	/* Contiguous range */
 #define PTE_PXN			(_AT(pteval_t, 1) << 53)	/* Privileged XN */
 #define PTE_UXN			(_AT(pteval_t, 1) << 54)	/* User XN */
+#define PTE_SWBITS_MASK		_AT(pteval_t, (BIT(63) | GENMASK(58, 55)))
 
 #define PTE_ADDR_LOW		(((_AT(pteval_t, 1) << (50 - PAGE_SHIFT)) - 1) << PAGE_SHIFT)
 #ifdef CONFIG_ARM64_PA_BITS_52

arch/arm64/include/asm/unistd32.h

@@ -840,7 +840,7 @@ __SYSCALL(__NR_pselect6_time64, compat_sys_pselect6_time64)
 #define __NR_ppoll_time64 414
 __SYSCALL(__NR_ppoll_time64, compat_sys_ppoll_time64)
 #define __NR_io_pgetevents_time64 416
-__SYSCALL(__NR_io_pgetevents_time64, sys_io_pgetevents)
+__SYSCALL(__NR_io_pgetevents_time64, compat_sys_io_pgetevents_time64)
 #define __NR_recvmmsg_time64 417
 __SYSCALL(__NR_recvmmsg_time64, compat_sys_recvmmsg_time64)
 #define __NR_mq_timedsend_time64 418

arch/arm64/kernel/pi/map_kernel.c

@@ -173,7 +173,7 @@ static void __init remap_idmap_for_lpa2(void)
 	 * Don't bother with the FDT, we no longer need it after this.
 	 */
 	memset(init_idmap_pg_dir, 0,
-	       (u64)init_idmap_pg_dir - (u64)init_idmap_pg_end);
+	       (u64)init_idmap_pg_end - (u64)init_idmap_pg_dir);
 
 	create_init_idmap(init_idmap_pg_dir, mask);
 	dsb(ishst);

arch/arm64/kernel/syscall.c

@@ -53,17 +53,15 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 	syscall_set_return_value(current, regs, 0, ret);
 
 	/*
-	 * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(),
-	 * but not enough for arm64 stack utilization comfort. To keep
-	 * reasonable stack head room, reduce the maximum offset to 9 bits.
+	 * This value will get limited by KSTACK_OFFSET_MAX(), which is 10
+	 * bits. The actual entropy will be further reduced by the compiler
+	 * when applying stack alignment constraints: the AAPCS mandates a
+	 * 16-byte aligned SP at function boundaries, which will remove the
+	 * 4 low bits from any entropy chosen here.
 	 *
-	 * The actual entropy will be further reduced by the compiler when
-	 * applying stack alignment constraints: the AAPCS mandates a
-	 * 16-byte (i.e. 4-bit) aligned SP at function boundaries.
-	 *
-	 * The resulting 5 bits of entropy is seen in SP[8:4].
+	 * The resulting 6 bits of entropy is seen in SP[9:4].
 	 */
-	choose_random_kstack_offset(get_random_u16() & 0x1FF);
+	choose_random_kstack_offset(get_random_u16());
 }
 
 static inline bool has_syscall_work(unsigned long flags)