QT based cross platform canbus tool (C) 2015 EVTV and Collin Kidder
A QT5 based cross platform tool which can be used to load, save, and capture canbus frames. This tool is designed to help with visualization, reverse engineering, debugging, and capturing of canbus frames.
Really requires at a resolution of at least 1024x768. Fully multi-monitor capable.
Currently canbus capture requires a CANDue board from EVTV: (http://store.evtv.me/proddetail.php?prod=ArduinoDueCANBUS&cat=23)
The CANDue board must be running the GVRET firmware which can also be found within the collin80 repos.
It should, however, be noted that use of a capture device is not required to make use of this program. It can load and save in several formats:
-
BusMaster log file
-
Microchip log file
-
CRTD format (OVMS log file format from Mark Webb-Johnson)
-
GVRET native format
-
Generic CSV file (ID,D0 D1 D2 D3 D4 D5 D6 D7)
Requires QScintilla library available at:
https://www.riverbankcomputing.com/software/qscintilla/download
Also uses QCustomPlot available at:
However, this source code is integrated into the source for SavvyCAN and one isn't required to download it separately.
Instructions for compiling with Ubuntu:
sudo apt-get install qt5-default qtdeclarative5-dev libqt5serialport5-dev libudev-dev
download and extract QScintilla (see above for link), assume it is extracted in QScintilla-gpl-2.9.1
cd ~/QScintilla-gpl-2.9.1/Qt4Qt5
qmake qscintilla.pro
make
sudo make install
Optionally remove ~/QScintilla-gpl-2.9.1
cd ~
git clone https://github.com/collin80/SavvyCAN.git
cd SavvyCAN
qmake
make
Now run SavvyCAN
./SavvyCAN