Merge tag 'master-2014-09-23' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/linville/wireless

John W. Linville says:

====================
pull request: wireless 2014-09-23

Please consider pulling this one last batch of fixes intended for the 3.17 stream!

For the NFC bits, Samuel says:

"Hopefully not too late for a handful of NFC fixes:

- 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a
  depmod dependenyc cycle.
- One potential buffer overflow in the microread driver."

On top of that...

Emil Goode provides a fix for a brcmfmac off-by-one regression which
was introduced in the 3.17 cycle.

Loic Poulain fixes a polarity mismatch for a variable assignment
inside of rfkill-gpio.

Wojciech Dubowik prevents a NULL pointer dereference in ath9k.
====================

Signed-off-by: David S. Miller <[email protected]>

drivers/net/wireless/ath/ath9k/main.c

@@ -513,7 +513,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 	 * touch anything. Note this can happen early
 	 * on if the IRQ is shared.
 	 */
-	if (test_bit(ATH_OP_INVALID, &common->op_flags))
+	if (!ah || test_bit(ATH_OP_INVALID, &common->op_flags))
 		return IRQ_NONE;
 
 	/* shared irq, not for us */

drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c

@@ -4921,7 +4921,7 @@ static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
 	struct brcmu_chan ch;
 	int i;
 
-	for (i = 0; i <= total; i++) {
+	for (i = 0; i < total; i++) {
 		ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
 		cfg->d11inf.decchspec(&ch);
 

drivers/nfc/microread/microread.c

@@ -501,19 +501,27 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
 		targets->sens_res =
 			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
 		targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
-		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
-		       skb->data[MICROREAD_EMCF_A_LEN]);
 		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+		       targets->nfcid1_len);
 		break;
 	case MICROREAD_GATE_ID_MREAD_ISO_A_3:
 		targets->supported_protocols =
 		      nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]);
 		targets->sens_res =
 			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
 		targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
-		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
-		       skb->data[MICROREAD_EMCF_A3_LEN]);
 		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+		       targets->nfcid1_len);
 		break;
 	case MICROREAD_GATE_ID_MREAD_ISO_B:
 		targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;

drivers/nfc/st21nfca/Makefile

@@ -2,7 +2,8 @@
 # Makefile for ST21NFCA HCI based NFC driver
 #
 
-st21nfca_i2c-objs  = i2c.o
+st21nfca_hci-objs = st21nfca.o st21nfca_dep.o
+obj-$(CONFIG_NFC_ST21NFCA)     += st21nfca_hci.o
 
-obj-$(CONFIG_NFC_ST21NFCA)     += st21nfca.o st21nfca_dep.o
+st21nfca_i2c-objs  = i2c.o
 obj-$(CONFIG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o

drivers/nfc/st21nfcb/Makefile

@@ -2,7 +2,8 @@
 # Makefile for ST21NFCB NCI based NFC driver
 #
 
-st21nfcb_i2c-objs  = i2c.o
+st21nfcb_nci-objs = ndlc.o st21nfcb.o
+obj-$(CONFIG_NFC_ST21NFCB)     += st21nfcb_nci.o
 
-obj-$(CONFIG_NFC_ST21NFCB)     += st21nfcb.o ndlc.o
+st21nfcb_i2c-objs = i2c.o
 obj-$(CONFIG_NFC_ST21NFCB_I2C) += st21nfcb_i2c.o

net/rfkill/rfkill-gpio.c

@@ -54,7 +54,7 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
 	if (blocked && !IS_ERR(rfkill->clk) && rfkill->clk_enabled)
 		clk_disable(rfkill->clk);
 
-	rfkill->clk_enabled = blocked;
+	rfkill->clk_enabled = !blocked;
 
 	return 0;
 }